Question about Gas Gas Motorcycles

1 Answer

Kick start seized

Kick start seised

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 28 Answers

IF YOUR KICKSTART HAS SEIZED AND IT WON'T TILT BACK IN THE PROBLEMS ON THE SHAFT (REMOVE THE DOMED ALAN CAP BOLT THEN REMOVE THE ACTUAL KICKSTART AND CLEAN UP THE SHAFT AND INSIDE DIA OF THE KICKSTART AND LUBE IT BEFORE REFITTING, MIND YOU DON'T LOSE THE SPRING AND BALL). IF ITS SEIZES WHEN YOU KICK THE KICKSTART THEN ITS THE KICKSTART GEAR OR BUSH IN THE SIDE COVER THATS THE PROBLEM. ITS EASY ENOUGH TO CHANGE IF YOU HAVE THE TOOLS FOR THE JOB. IF ITS A DIRT BIKE TRY TO PRESSURE WASH IT THEN SPRAY WITH WD-40 IT MIGHT HELP. GOOD LUCK IF YOU NEED HELP WITH STRIPPING IT DOWN JUST LET ME KNOW (ALSO LET ME KNOW IF ITS A LEFT OR RIGHT SIDE KICKSTART)

Posted on Jan 05, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electric start does nothing and kick start ain't working ur has power Yamaha Cygnus x 125


the way you are describing it the engine is seized
but if the engine will turn over on the flywheel bolt
then it could be a couple of things
using your kick start (if your kick start does not move when pressure is applied then your engine is seized)
(remedy) total engine strip
("your kick start just goes up and down not doing anything")
seized clutch
remedy strip your clutch and clean up
("if a clicking noise is heard when using the electric start but your engine does not move it is your starter solenoid")
take off old one and replace and replace

Apr 14, 2014 | Motorcycles

1 Answer

Kenmore model 110 dryer won't start. Hums a bit, then nothing. Starting to get a slight burning smell too. How to remove the top console to get to the push to start switch?


From what you described it sounds like your drum is seised, try turning it by hand. If it is seised than you will have to check to see if you burnt your motor. Good Luck

Sep 24, 2011 | Dryers

1 Answer

Motor has seised up on our Reddy heater 55 how do we fix it?


Question- are you sure the motor has seized? If the rotor shatters it can bind the motor.
If the motor has seized it must be replaced, It is not serviceable.

tbugger_0.jpg

Nov 24, 2010 | Reddy Heater-30-55,000 BTU Variable

1 Answer

My py 90 wont start,


the same problem happened my py90 try taking out the sparkplug blowing in the hole to clean it out and if that doesnt work blow into the petrol cap really fast wen ur finished blowing put ur finger over the cap dont let any air out then kick start it about 6 times it should work on 2 kick starts but keep ur finger over the petrol cap

Feb 13, 2010 | 2005 Factory bike Chrono SM 250

1 Answer

Wont start


Hi

When you say kick strat wont go down, do you mean engine is "stuck" If this is the case the engine is "seized" try turning engine over with a spanner on the drive sprocket. If no movement at all engine is seized.I assume that the radiator is full of coolant??

Aug 12, 2009 | 2005 Honda CRF 230 F

3 Answers

Engine seized?


First thing to do is make sure it's the kick starter that has seized and not the engine. Take the cover off the end of the crankcase and try to turn the crankshaft. Apparently these engines were notorious for doing bottom ends. Start pulling it down and see what you find..

Jul 16, 2009 | 2004 Yamaha YZ 250 F

2 Answers

Lbwhit the whole engine seized, you can't kick start it, the kick start won't move. engine does not turn over, push start does not work


Pull off the cylinder head. Look in the bore. Can you see seize marks on the cylinder? Nine chances out of ten you are going to have to remove the cylinder anyway, so go ahead and do it now. Did the piston seize up? Remove the left side cover. Rotate the flywheel. Crankshaft free to move now?

If not, drain the oil and look at it. Any metal shavings, cork or bits of ground metal in it? Remove the left side cover. Look at the kick start gear. Is it "locked up" in the clutch hub? Remove the clutch hub. Will the crankshaft turn freely now? Put the bike on blocks and turn the rear wheel. Will it turn? While the wheel is turning, can you shift into neutral? When in neutral, can you hold the clutch shaft still while the wheel turns? Any funny noises while the wheel turns?

The piston may have seized the engine. The kick start mechanism or a bent shift fork may have locked up the engine. Gremlins may have done it. Something did, so let's find out what.

Please rate this solution. Thanks!

Apr 05, 2009 | 2004 Yamaha YZ 125

1 Answer

Kick start frozen.,


pull the exhaust completely off the bike.take a look in the exhaust port and see if the piston is seized.if you can't see,take the head off and look into the top of the cylinder.sounds like a seized piston or rod

Apr 04, 2009 | 2003 Honda CR 250 R

1 Answer

Can't get transmission out 2001 chev blazer


did you take the short shaft loose? even if it were seized it would still come out.you may have to wiggle it back and forth a bit to work it loose but it should come out.

Jan 08, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gas Gas Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Kim Halliwell

Level 1 Expert

32 Answers

Livewyre Studio
Livewyre Studio

Level 1 Expert

24 Answers

Are you a Gas Gas Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...