Question about 2005 Bajaj CT 100

1 Answer

Break liner - 2005 Bajaj CT 100

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Bajaj Master
  • 43,091 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.How to replace and adjust the rear brakes on 150 or 50 cc GY6 Chinese...
How to change brakeshoes drumbrake
DOWNLOAD BAJAJ CT 100 SERVICE MANUAL
http://www.marutibajaj.com/pdf/ct100.pdf
Bajaj Auto Ct 100 2015 User Manual

Posted on Dec 01, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Roof not working no noise with the motor at all is there a fuse or more to it than that


It's a circuit breaker and it's tied in with the door windows. There is a module with the motor at the front of the roof window. You can pull the head liner down a bit and see it. I have replaced these modules without removing the head liner. But you have to be careful not to pull it down so much that it breaks/cracks. It's tight working there, but can be done. If you look in there and see cables just laying or sloppy, The regulator has to be replaced. Head liner has to come down.

Sep 07, 2015 | Cars & Trucks

1 Answer

Moon roof won't open on my 2002 bonneville sle


The motor and module is in front of the moon roof window, under the headliner. You can pull the liner down to work on it, but be careful not to pull it so far that it breaks. If the cables are broke or really loose, you have to remove the liner. Replace the regulator. Most times it is the module. It can be replaced without removing the liner.

Aug 31, 2014 | 2002 Pontiac Bonneville

2 Answers

Emerson mw9117w


The handle screws are accessed by removing the door liner which usually snaps in place. Often, the tabs that hold the liner in place will break off during disassembly. Officially, after working on a microwave door it should be tested for microwave leakage.

Jul 18, 2014 | Microwave Ovens

1 Answer

Where is the windshield washer motor of a 96 toyota camry located?


The washer pump is located at the bottom of the fluid tank. On a '96 or '97 it's on the right (passenger side) under the inner fender liner. Remove the Right front wheel. Remove the lower engine cover. You should be able to get the pump out. If it's corroded fast, then you'll have to remove the inner fender liner (lots of clips will break) and remove the entire tank assembly.

Apr 18, 2011 | 1997 Toyota Camry

1 Answer

1999 saab "brake lights"


I guess your break lights aren't working; If the bulbs are good remove the trunk lid liner find the rubber boot that house the wire harness pull the boot and check the wires for break repair if needed. This is a common Saab problem

Sep 16, 2010 | 1999 Saab 9-5

1 Answer

Door handle not closing properly.


Hi,
It's pretty common for the latch assembly located in the door to break on these. Access to the latch is by removing the inner door panel, just make sure to kill power to the unit, as there are 2 switches located on the assembly. Once the door liner is off, it's pretty evident how to change the part, because the door liner screws are what holds it in.

Post again if you need more help.

Good luck

Aug 16, 2010 | Whirlpool 24 in. GU940SCG Built-in...

1 Answer

How can I access the defrost heater on maytag model rtd21a freezer/ref? I see only one screw in the freezer compartment. I have replaced defrost heaters in whirpool and kenmore. There are screws in those...


The defrost heater sits behind the evaporator coil. The evaporator coil lies horizontally between the freezer and refrigerator compartments. It is a lot of work to get access to the defrost heater. To do that you will need to remove the shelving in the freezer, both the refrigerator and the freezer doors and the trim pieces between the freezer and refrigerator compartments and remove the plastic liner at the bottom of the freezer. Once you removed the plastic liner, then you can see the evap coil and the heater is way in the back of the coil. Good luck.

Jul 01, 2010 | Refrigerators

1 Answer

Broken crisper shelf supports


What up G? (jk)

Look, I'm not really sure about this, but it sounds like you may have a warranty issue here. The reason I believe this is because those supports are actually part of the liner (which CAN NOT be removed, btw) and the liner should have a really kickin' warranty behind it. Check your owner/user manual for warranty info and see if I'm correct.

If I'm wrong then it's gonna be a pain to ever keep those supports in place. Whirlpool had a liner problem not long ago and "issued" an authorized repair for it which utilized an epoxy resin and other materials. But if memory serves, that was just for cracks in the liner, not functional parts of the liner breaking away.

Hope this helps,
SG

Mar 23, 2009 | Refrigerators

2 Answers

Replace rear light bulb


OPEN THE TAILGATE, AND ON THE SIDE WHERE THE LIGHT IS BACK RIGHT BEHIND THE TAILLIGHT, THERE IS TWO SCREWS.. JUST TAKE THE SCREWS OUT THE TAILLIGHT WILL JUST SLIDE RIGHT OUT..( IF YOU HAVE A BED LINER YOU WILL NEED TO PULL THE BED LINER OUT JUST A LITTLE BIT TO GET TO THE SCREWS..GOOD LUCK KEITH..

Mar 14, 2009 | 2002 Nissan Frontier Crew Cab

2 Answers

I have a brake light out.How do you get to those things. This is a 1998 nissan frontier


do you have a bed liner?? if so, you need to move the bed liner away from the rear lights in back to access the screws that hold the tail light in. on the side of the bed right by the tail light are 2 screws holding the light in. remove screws, remove tail light replace bulbs, re-assemble.

Jul 22, 2008 | 2005 Nissan Frontier

Not finding what you are looking for?
2005 Bajaj CT 100 Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

sachin sharma
sachin sharma

Level 2 Expert

171 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...