Question about kawasaki KX 125 Motorcycles
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: clutch adjustment
There are to different adjustments you can make. The most common adjustment made is on the clutch cable under the rubber boot real easy to figure out once you slide the boot off. The second is at your ramp and ball. I don't ride a RK so I don't know the exact method, but if you stop by your local library they might have a manuel that explains it in detail. My library does.
Posted on Apr 19, 2009
you may need to check the switch that the lever presses to...it has a small wiring connection to it and you cannot miss it.Now I assume that you mean you have to push the lever back then the light goes off...If this is the case then you caliper or braking needs to be looked as the spring mechanism that brings the lever back into rest position is not working..
Posted on Jan 10, 2010
I'm sorry but I don't quite understand what the problem is. If the engine is not turning over when you press the starter button, check the battery first. Take it to an automotive parts house. They can test the battery under a load.
If the engine is turning over but won't start, make sure the "Run/Stop" switch is in the "Run" position, Pull the choke out and leave the throttle completely closed and press the button. If it still doesn't start, Check for fuel getting to the engine and check for spark.
There were several issues with the first year Twin Cam engine and I think your bike was one of the first to get the engine. You may need to check the compression on your engine. Harley has some issues with the camshaft drive sprocket and the bearings early on. I think your engine is also equipped with a compression sensor. If the engine does not have compression, it will not have any spark either. If you take the plugs out, you cannot check the spark the way you used to be able to do. If you wish to check for spark, unplug the wires from the spark plugs in the engine and plug another set of spark plugs into the wires. You should be able to see the spark that way. Do the test again using the plugs that was in the engine to check the spark plugs.
If you find out anything more and it still won't start, repost with the new information and we'll have another go at the problem. Good Luck!
Posted on Jan 28, 2010
i have a 2003 ultra classic my riding lights keep blowing the fuse it wont do it sitting in the garage i have gone thru the wiring harnessing looking for the short fixed many things but still have the problem the turn signals work the brake lights still work so where do i look
Posted on Jun 30, 2011
Tips for a great answer:
Apr 04, 2013 | 2001 Harley Davidson FLHRCI Road King...
Jun 23, 2012 | 2005 Harley Davidson FLHRS - FLHRSI Road...
Jun 08, 2012 | 2008 Harley Davidson FLHRC Road King...
Jun 30, 2011 | 2004 Harley Davidson FLHRCI Road King...
Oct 14, 2010 | 2000 Harley Davidson FLHRCI Road King...
Oct 08, 2010 | 2008 Harley Davidson FLHRC Road King...
Jun 08, 2010 | 2000 Harley Davidson FLHRCI Road King...
May 16, 2010 | 2005 Harley Davidson FLHRS - FLHRSI Road...
Nov 22, 2009 | 2008 Harley Davidson FLHR Road king
Nov 10, 2008 | 2008 Harley Davidson FLHRC Road King...
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: