Question about 2004 Honda VT 1100 C2 Shadow Sabre

1 Answer

Fuse replacement. How do I get the fuse under the seat to come out so I can replacre it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The fuse assembly is in a red case that is attached to the another black component. I initially could not get the red case to come out. Come to find out the entire assembly, the red and the black item are one unit and come out as a whole. They are tight, but they just lift out.

Posted on May 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 chevy equinox license plate light won't work after bulb and fuse replacement


Do the park lamps work ? license plate lights get power from same fuse ! Check ground wire ! use a volt meter an do voltage drop test ! Voltage Drop Testing The fuse for the license plate lights is in the under hood fuse box -engine compartment ! fuse #12 RT PRK LAMP 10Amp .

May 23, 2015 | 2007 Chevrolet Chevrolet Equinox LT

1 Answer

Why are my power windows, mirrors, locks and pre set seat settings not working on my 2001 cadillac seville


Most of the time (90%) it the fuse. Check the fuse box under the hood and the other under the back seat. Check the owners manual to determine which fuse corresponds to the seat settings and which ones corresponds to the windows. There are also spare fuses supplied in the fuse box under the front hood - passenger side. You can use these spare fuses, just make sure the fuse number matches the one you are replacing. Use the white fuse removal clip to remove the fuse and check it under the light - if it appears that the fuse element is burned or broken then it has to be replaced. Hope this helps.

Jun 23, 2014 | 2001 Cadillac Seville

1 Answer

Where is the fuse box for the brake lights on a 1999 cadillac seville sls


I believe the fuse for the stoplamps on your vehicle is in the fuse box located under the rear seat on the drivers side. The seat cushion must be removed to access this box. To do that, pull up on the front of the cushion to release the front hooks, then pull the cushion up and out towards the front. The fuse box should be under.

The fuse for the stoplamps is fuse 19, circled in red. Check this with the diagram that should be in the fuse box.

12_5_2012_11_30_04_pm.jpg


If you want to replace the fuse, use a fuse with the same amp rating. Your car has a second fuse box under the hood, in the engine compartment between the windshield washer fluid and the power steering fluid on the passenger side. It should be a black box similar to the one under the seat. In this box, there are five spare fuses you can use, as well as a fuse puller making it easier to remove fuses. The spare fuses are fuses 48-52, and the fuse puller is located in slot 53.
12_5_2012_11_35_19_pm.jpg

Take a spare fuse from under the hood that matches the amp rating of the brake fuse you are removing, and insert the new fuse into the fuse box under the seat.

To replace the cushion, slide the rear of the cushion up under the seatback so it hooks unto the wire loops on the back frame, then push backwards and down until the spring locks on both sides lock. Make sure none of the seat belts gets twisted into the cushion.

Check to make sure all systems, including the brake lights, are working properly.

Dec 05, 2012 | Cadillac Seville Cars & Trucks

4 Answers

Both Low beam headlights aren't working in my 2002


my suggestion is that you check/ replacr the HDM(headlight driver module) relay in the main fuse box located under the hood near the battery.

Jul 30, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

Maytag microwave suddenly died after 20 seconds of use - lost all power. Outlet is good. Anyone else experienced this? My cup of tea looks sooo sad - like my wallet... Appreciate your time and...


Replacr the internal fuse you will find when you remove the cabinet. It will be near where the cord enters the cabinet. It is a special fuse ... get a replacement at most hardware of appliance parts stores.

Aug 31, 2010 | Maytag MMV5000 Microwave Oven

1 Answer

On my 2003 yukon I have no heated front seats working and no power seat for the drivers side.


Look in the fuse box on the driver's side of the vehicle on the outboard side of the dash under the triangular cover which snaps off and on. This panel is not visible when the door is closed. If you have your owner's manual, look on page 5-104. This is where the fuses and relay/circuit breaker descriptions, layout, and specifications begin. This section runs to page 5-111.
You are going to check fuse number IGN3, a red plastic, stab-in miniature 10Amp fuse. It has an "S"-shaped element visible through the side of the fuse body. If the element is broken or burned, replace this fuse. DO NOT use a replacement fuse of ANY other rating; use an identical 10Amp fuse ONLY.
You are also going to look for the "Center Instrument Panel Fuse Block," located under the instrument panel, to the left of the steering column. You are going to check the device labeled "30A CB Seat." This is driver and passenger seat module circuit breaker. This circuit breaker is an automatic resetting device, replacement is necessary only if there is no other problem, and it will not reset.
If only the driver seat is affect, the problem is not the CB Seat; check the wire harness and connector under the seat. There is almost no clearance under the seat, and it may needs be removed to check this. There are four 14mm or 15mm bolts, one at each outboard corner of the seat, the front ones under snap-on plastic covers, which anchor the seat to the vehicle. These bolts are installed with an anti-seize anchoring compound which make them difficult to remove, but aside from elbow grease, there is no other trick to removing them.
Good luck, and if I have helped you, please remember to comment/vote.

Feb 21, 2010 | 2003 GMC Sierra 1500

2 Answers

Cannot find the fuse box (sorry, I'm a daft worman!)


should be under the seat or on the right side behind the side cover. The cover just pops off.

Aug 26, 2009 | 1996 kawasaki EN 500 Vulcan Classic

1 Answer

Cant find a fuse!


There Is NOT a FUSE for the Seat Motor I Have Checked The Manual EXTENSIVELY and for seat Fuse AND "RELAY" the Only fuse is for Auto Seat-belt & Warning Light. I Do Believe there Should be A Relay Under the seat This is Where Most Forgen Vehicle Seat Relays are. AlData Shows NO Power Seat FUSE Or Relay though. Seat "BELT" Motor Module is Under Consel At Park Brake Lever Area----------Hope this Helps

May 30, 2009 | 1987 Toyota Camry

1 Answer

Heated seats do not work


Is there a chance there might be a fuse under the seat

Feb 04, 2009 | 1998 Chevrolet Suburban

Not finding what you are looking for?
2004 Honda VT 1100 C2 Shadow Sabre Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...