Question about 2006 kawasaki KX 250 F

1 Answer

My 2007 KXF 250 keeps backfiring? why is this?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Backfires are caused by mixture burning in the exhaust pipe. I would suggest that you check the seal between the exhaust valves and the head when the piston is on the compression stroke. You may have a burnt valve (I understand KXFs are prone to this problem!). Try talking to Teamgreen Kawasaki, they may be able to point you in the right direction. Good Luck!

Posted on May 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bike trying to start on starter but won't run faster then starter will go every now and then it'll backfire


I have had several different types of vehicles with what your describing and on most changing the coil did the trick

Sep 20, 2012 | 2007 kawasaki KLX 250

1 Answer

How lbs. torque is necesary for top end? for kxf 250 05


Torque - 10 mm Cylinder Head Bolt : 49 N·m (5.0 kgf·m, 36
ft·lb)
Torque - 6 mm Cylinder Bolt : 12 N·m (1.2 kgf·m, 104 in·lb)
6 mm Cylinder Head Bolt : 12 N·m (1.2 kgf·m, 104 in·lb)

Dec 25, 2010 | 2004 kawasaki KX 250 F

1 Answer

Hi there i have a kxf 250 2004 its hard to start and when it does it back fires alot could it be valves


It could be valves , check all the valve clearances.
also try a new spark plug
and clean the carb
a faulty kill switch can sometimes cause backfire as well

Aug 10, 2010 | 2004 kawasaki KX 250 F

1 Answer

2007 KXF 250 electrical problem


when the ignition parts like the coil and the transistors in the cdi unit gets warmed up they dont work as well as when there cool,,,so a problem thats not there when cold will be there when its hot,,,,if the stator has a small fault in it when cold when it gets hot it turns into a big fault! the best way to find this fault is by swoping one part at a time till you fine the faulty part,,,or put it into the bike shop and pay through the knows for the fix? have you a friend with the same type of bike you could swop the parts with??? it a big big help if you have! i would start with the coil then the cdi unit,,,there the most likley parts to play up when they get to hot they go faulty!

May 21, 2010 | 2007 kawasaki KLX 250

1 Answer

I have a kxf 250 2007 with an electrical problem that i cant find


bad spark plug, tight valve clearances,short in key switch or kill button, blocked fuel filter (There is usually one inside the tank on the fuel tap pick up)

Apr 12, 2010 | 2007 kawasaki KLX 250

1 Answer

No idle &bacfires on deceleration


hi mate on the carb you will find 2 screw 1 is for the idle and the over is for mixture the idle one will be the furthest out screw it in 1/4of a turns will the engine is running this will take the idle up on the engine and the backfiring is fuel in the exhaust not being burnt so on the over screw on the carb screw that in 1/4 of turns this will decrease the amount of fuel going into the engine if it still backfires screw it in 1/4 of turns again and see what difference it makes good luck

Jul 10, 2009 | 2004 kawasaki KX 250 F

1 Answer

Why is my kick starter ceasing? I just changed the oil in my 2004 kxf 250, and went to ride it and it would just die and the kick starter ceased. Please help..


I have same bike and know some about it. and i race a lot. your bike has a crank or rod whatever you want to call it but it could be cracked, broke, or even could have dirt on it.

Apr 23, 2009 | 2004 kawasaki KX 250 F

1 Answer

2004 KAWASAKI KXF250


try a new plug sometimes a plug will not fire under compression. also adj the valves

Nov 25, 2008 | kawasaki Full Suspension Mountain Bike Men

Not finding what you are looking for?
2006 kawasaki KX 250 F Logo

Related Topics:

634 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...