Question about 2003 Harley Davidson XL 1200 C Sportster Custom

1 Answer

I have a 2003 sportster and a spy LM508 alarm kit. We can't figure out were to mount the motion senser, siren, and the speaker Everything else is mounted under the seat and it says to mount them somewere they won't get wet.Need help bad!!!!.

Posted by on

  • bluebluzzin May 16, 2009

    The thing about mounting the alarm is that you don't want anyone to get to it or see any of it right: So it needs to be mounted where you can;t see or get to it!!!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 200 Answers

Cover sensor in plastic, and mount speaker facing bacwards as not to ingest rain while riding....if you don't ride in the rain (i don't) and you won't be directing waterflow on the components w/washing ur ride then don't worry about the mounting so much....Good Luck to you friend....Tim

Posted on May 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

False alarm


If it's showing alarm and the number 06, this means the panel believes zone 6 went into alarm. What's on zone 6, motion, door, panic button?

Nov 27, 2013 | Honeywell V15P-WLS - Ademco Vista15P...

1 Answer

Alarm goes off even after unlocking with remote


If the alarm has a siren with a backup battery, then check the condition of the siren battery. Is it drawing a large charge (drop in amps from the battery. Run a parasitic drain test). If so, then the siren could be at fault.

Is the alarm fitted with a sonic motion detector? Looks like two tiny speakers in a unit fitted in the centre of the dash. If so, this unit could be faulty.

Many after market alarm systems by the way, tend to only last for a few short years before failing. Is this an aftermarket product or factory?

Nov 03, 2012 | 2005 Jeep Grand Cherokee

2 Answers

Performance Teknique Icbm-7071 Everything on my alarm system is working, but now the only thing that will not work is the alarm sounding off. My receiver still beeps when my alarm goes off, but the car...


Sound like the siren. check the connections at the siren. If the connections are good and the system is sending a signal then, you may need to replace it.

Jul 27, 2012 | Car Audio & Video

1 Answer

I have a celica 2003 vvti 190 and have just returned from a trip to scotland. Whilst waiting for boarding onto the ferry i was playing the cd player and running the fan. When it was our turn to get on the...


If the system is the factory system, the following procedure is how to disable it:
Open the driver side door and enter the car
Insert the key into the ignition
Turn the key to the "on" position, and then back to the "Off" position 5 times in 1 second motions
on-off on-off on-off on-off on-off on try to start
"On" is where the warning lights illuminate on the instrument panel

Apr 05, 2017 | 2003 Toyota Celica

1 Answer

Just bought a DSC SD 15w siren has six wires. Using a GE Simon XT panel for fire and burglar alarms. Siren Has 6 wires. two red two black and two yellow. Which do I hook up? Do I need some kind of...


hook up red and black wires. Red wires to HW1&2 DC Out Terminal. 1 Black wire to HW1 and 1 Black wire to HW2. Resistor 47 Ohm resistor not needed unless siren supervision is turned on as an option. If needed , should go at the speaker, across red and black wires.

May 11, 2011 | Siren Dsc Sd 15w Ulf Surface Mount Siren...

1 Answer

Hi! Just had ADT install security system and it is a Simon XT. Door units, motion sensors and control unit are in house. They also put a motion sensor in garage, which is detached. My understanding is...


My understanding is that GE does not produce a wireless interior siren any longer. So if yo want to get a siren in the garage a wire will have to be run from the Simon 3 to the location in the garage where you would like to place the siren. PS ADT will not run wires to a detached garage. GL

Nov 16, 2010 | GE Security Simon 3 Wireless Home Security...

1 Answer

Just installed smart siren kit, worked ok for 1


Harley alarms, while a decent alarm system, are notoriously hard to set up. On a new installation I have sometimes had to run the set-up routine 4-5 times. I hope you have an owner's manual and/or good instructions. Keep trying to set the alarm up from the beginning. If you miss a key or time limit it's not unusual to have the set-up fail and you have to start all over. Disconnecting the battery will screw things up, so be careful.

Oct 02, 2009 | 2002 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Keypad reads siren trouble


Piezo siren connections to
terminal 10 require a 2k
resistor that can be located
at the panel, across term 4 and 10


Jan 06, 2009 | Home Security

1 Answer

Volvo s80 alarm


Have the codes read out for the vehicle. It is likely that the siren for the alarm is causing the false alarm. If the siren is bad, there will be a code set in the central electrical module. (CEM)

Jun 26, 2008 | 2003 Volvo S80

1 Answer

Wirng up a bw10000 car alarm to a dj systems siren


If you're connecting at the alarm module - you want the red wire from the siren to go to the brown wire on the alarm(the one that's in a plug with 12 or so other wires), not the red (red wire is the constant power input to the alarm).

Feb 24, 2008 | Car Audio & Video

Not finding what you are looking for?
2003 Harley Davidson XL 1200 C Sportster Custom Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...