Question about 2007 Yamaha YZF-R6

1 Answer

How to install flush mount leds on a motorcycle

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Take off existing mounted stock turn signals (unplug ground and live wire).  Plug new ground in from flush mounts as well as live. make sure wire plug is same size as pre-drilled hole in fairing. Otherwise it will not be flush of course. If the flush mounts purchased seem to need pre-drilled holes for a pair of screws mark them out and do so. Make sure to wrap and protect wire connections accordingly.

Posted on May 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Seeking Owner's manual

have you looked in the owner's manual ?
Support LED TV UN40H5203AF Samsung TVs
don't know if this the right one for your set, I think the 40" series all have the same manual. I couldn't download it myself. Also on that webpage you can 'chat' to a Samsung rep. who should be able to give you better directions to the correct instructions


Jan 15, 2016 | Universal 40-42 Inch Flat Screen Panel...

1 Answer

How to install turn signals on a 1999 HD Wide Glide

If it has wiring in place to power the lights and mounting locations, go buy some turn signal lights that will look good and fit the mounts you have. Connect the brighter colors from the bike wiring to the brighter colors of the turn signals and the same for darker colors.

If you buy signals with LED lighis, buy a 12 Volt turn signal flasher that is made for LED's--eBay has them. If you choose turn signals with incandescent bulbs (the traditional type), be sure each bulb draws 16 or 17 watts as other wattages will not allow a standard flasher to operate correctly--google the bulb number to find out. With other bulb wattages, the signals won't flash; they will stay on or not turn on at all as standard flashers are made to drive 2 16-watt bulbs; 32 watt loads. The good news is that the flashers made for LEDs will work with any type of bulbs or LED's, so go ahead and order one of the LED flashers to avoid trouble shooting the signals once they are installed.

Apr 28, 2014 | 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Panasonic led viera power light blinks 10 times then stays on no power

These blinks [flashes] are fault indication. You can get an idea about the faulty stage circuit inside the TV, by the number of these blinks. Count it carefully, by switching it ON and OFF, more than 2 times at least, so that, you can make sure about the number of these blinks. If you wish to get more details, check the site linked here. Surf the site in "MOSAIC" view.

Jan 29, 2014 | Universal 40-42 Inch Flat Screen Panel...

1 Answer

Can you give me some advice on, how to mount a 46in tv above my non working fireplace mantle?

You would have to use a mounting bracket specifically designed for the type of installation you describe and it certainly would have to be fastened into the studs behind the sheetrock. A TV of that size will be heavy to lift and install in the bracket

Mar 04, 2013 | Universal Bedroom Mounting Bracket For...

1 Answer

Installed a new starter and it will not turn over it just seams to turn but will not engage. if i hold the starter switch long enough it will slowly start to engage. Vstar 1100 2001

did it do the same thing before? if so there are probably teeth broken off the flyweel, remove the starter and look at this. if not the new starter is probably bad,but make sure it is mounted squarly and flush to its mounting surface.

Feb 16, 2010 | 2001 Yamaha V Star 1100 Classic

1 Answer


Check your fuses. Sounds like you have something shorted, or hooked up incorrectly.

Jul 02, 2009 | 2007 Honda CBR 1000 RR Fireblade

1 Answer


You are missing you rear turn signals. Yes there should be a flasher but it requires all lights to be working before it will flash. It needs the original loads on the system. If led sights are installed they should be accompanied by loads that fool the flasher into thinking that the original bulbs are still there.

Jun 13, 2009 | 1990 Suzuki GSX-R 750 L

Not finding what you are looking for?
2007 Yamaha YZF-R6 Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts


Level 2 Expert

314 Answers


Level 2 Expert

281 Answers


Level 3 Expert

1214 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides