Question about kawasaki KLR 250 Motorcycles

1 Answer

Have an 84 yamaha venture 1200 with no spark on the rear cylinders? need to know how to test what is wrong and what to look for. Can't find a 1984 yamaha Venture royal in the markings for Yamaha

Posted by on

  • Anonymous Mar 17, 2014

    can you rebuild a slave cylinder on a1999 Yamaha venture

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,623 Answers

Hello Mike...If the rear cylinders aren't firing I would start by checking for defective plug wires. Visual, for cracks and with an ohm meter for resistance. Test your coils, same principal, test to see if their is power to the coils. Your bike has a TCI box thats located in a not so good spot....that really takes abuse. This is "brain" a circuit board. It gets hot, cools down, and moisture inside is the result, over the years it finally gives up. The voltage to the coils travels through the TCI. If you aren't getting 12 volts, then corrosion, faulty circuit, leaking capicitors inside the "box" are at fault. I have heard of some riders opening the TCI, letting the sun dry it out and remounting in a different location, I have replaced several, on the early viragos. They have been discontinued. i found several on ebay, also i know a biker that can repair solder these, if needed.

Posted on May 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 84' Yamaha fj1100 has fuel, spark, and the battery is new. It won't start. Will turn over just fine but not actually start up and run. Help please


Hi, Kennie great talking to you last night this is just for points it's the same stuff that I sent you, and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch lever, or kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha Fault Codes
What to do When Your Motorcycle Won Start
DOWNLOAD Fj1100 1984 $10 cheap
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fj-owners-manuals

Jul 07, 2017 | 1984 Yamaha FJ 1100

1 Answer

1984 Yamaha venture royale 1200 stuck in 4th gear


Hi, Michael and the usual suspects are:
1. Clutch not disengaging.
2. Bent shift shaft.
3. Shift fork bent or seized.
4. Gear seized on the shaft.
5. Gear positioning lever binding.
6. Shift return springs weak or broken.
7. Shift return spring pin loose
8. Shift mechanism arm spring is broken.
9. Shift mechanism arm is broken.
10. Shift drum is broken.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Stuck in 4th Gear 1995 Sportster 1200 Harley Davidson Forums
ATV Connection
http://bergall.org/temp/venture/pdf/1983-1985-yamaha-venture-manual-complete-with-wiring-diagrams.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xv-owners-manuals

Feb 20, 2017 | Yamaha Royal Star Venture Motorcycles

1 Answer

I have no rear brake on my 83 venture royale 1200


Hi, Bill for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Brake Help
The Venturers Yamaha Venture Technical Support Library
Part 04 12 Yamaha Venture 1984 1992 Motorcycle Maintenance
http://bergall.org/temp/venture/pdf/1983-1985-yamaha-venture-manual-complete-with-wiring-diagrams.pdf

Jun 26, 2016 | Motorcycles

1 Answer

I have a 84 yamaha fj 1100 it has compreshion and gas and spark but wont start


Hi, Dakota and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
my 1984 fj wont start when hot
http://meiguohosting.com/How-to-fix-start-problem-for-your-1984-Yamaha-FJ1100
https://www.tradebit.com/filesharing.php/search/0/yamaha+fj1100

Jan 22, 2016 | Yamaha Motorcycles

1 Answer

85 yamaha venture no spark on front cylinders


Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
6. Faulty ignition coil or ignition / electronic module
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
1999 royal venture no spark limited knowledge need help
no spark at any plugs
http://www.yamahaventure.nl/pdf/servicemanualxvz13tf.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2002/LIT-11626-15-33_37.pdf

May 04, 2014 | 2000 Yamaha Royal Star Venture

1 Answer

1984 yamaha venture royale voltage regulator removal


Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
The Venturers Yamaha Venture Technical Support Library
Part 11 12 Yamaha Venture 1984 1992 Motorcycle Maintenance
http://www.yamahaventure.nl/pdf/servicemanualxvz13tf.pdf
OEM parts for Yamaha
http://www.yamahaventure.nl/pdf/ownersmanualxvz13tf.pdf

Apr 12, 2013 | Yamaha Royal Star Venture Motorcycles

1 Answer

1984 venture , I bleed my rear brakes with a mighty-vac but cant get them where I need them to stop the bike good. does anyone know the problem


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Brake Help
The Venturers Yamaha Venture Technical Support Library
Yamaha XVZ13TFL Service Manual
OEM parts for Yamaha
Yamaha XVZ13TFY Owner Manual

Mar 18, 2012 | Yamaha Royal Star XVZ 1300 A Motorcycles

1 Answer

My engine has got a miss to it. It is at idle and through all driving ranges. I've tried cleaning out the carbs without taking them apart. but, it didn't seem to help.


You may want to look at the ignition system.....new spark plugs, verifying all 4 cylinders have spark, and if not,,,,testing the ignition coils for resistance, as well as the spark plug caps.
There have been a few ignition coil failures on the Venture and Tour deluxe models, mostly in the rear coils as they get road dirt and moisture on them.
The following site has very good tech support for the TD and Venture...www.venturers.org

Apr 15, 2011 | 2006 Yamaha Royal Star Tour Deluxe

1 Answer

Need to remove and replace front wheel bearings 1984 venture


dear 84 yamaha first thing i would do is to jack the front end of the bic off the ground and spin the front wheel and look to see if things look true . also listen for any slight noise coming from the wheel bearing. it is likely a bad front tire jim

Mar 30, 2009 | 1984 Yamaha XS 400 L Maxim

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

1,085 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...