Question about Honda Spacy 125 Motorcycles

1 Answer

1984 Honda Elite cr125

My honda elite 125cc was going about 55mph, which for a bike from 1984 with only 7k miles on it is great (55 is the rated top speed in the original manual), but after a ride around in the country it decided to **** out and now has trouble reaching 30 on a flat paved surface. i've checked the air filter and fuel filter, tried running fuel injector/carb cleaner gas additive, and all that jazz. earlier today my uncle noticed a leak from the bottom of the carb, and i need to know how to remove the carb to service this.

Posted by on

  • nathonix May 12, 2009

    rebuilt carb earlier this morning, as i work second shift so night is my day time. one of the needles that goes into a jet is controlled electronically and was covered in dirt. i had assumed this was the problem, however it still is running sub par. so a new question, would a tiny 5mm tear in the gasket on top of the carb that houses a spring and another needle be causing such a dramatic speed drop?


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Did you try to remove the

Posted on May 12, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2010 Goldwing GL1800. I'm having controll issues when riding 70 MPH or faster, especially with a cross wind or tail wind. What can cause the bike to wobblie and drift?

probably nothing because at 70mph any form of wind will greatly affect the handling of the bike
at 70mph even truck, stability can be affected by winds and they have more wheels than a bike

May 18, 2017 | Honda Motorcycles

2 Answers

I have a 02 Honda cr125 r and I took clutches and all out and when I put them back in I have no clutch it's lose or hard to squeeze handle and the bike stalls out when I put it in gear pls help me

pull the clutch plates back out and reassemble in the correct order and sequence
best get a workshop manual to see how to do it and how to adjust when finished

Dec 11, 2016 | 2002 Honda CR 125 R

1 Answer

I have a 1993 Honda 125cc was told to mix gas but these oil in crankcase do I need to mix?

You would never mix any fuel and oil for the crankcase. If it is a 2-stroke engine, the fuel and 2-stroke oil will need to be mixed before entering the cylinder. Some engines have an automatic mixing setup - those have a separate oil reservoir for 2-stroke oil, but it will usually be a plastic tank, located nowhere near the crankcase. On a "4matic" engine, it fires like a 4 stroke, but there is no crank case, and the fuel needs to be mixed like a 2 stroke. What is the vehicle you are referencing? A dirt bike or street bike? It seems the CR125 and NR125 are both 2 stroke engines, so somehow the fuel needs to be mixed with 2-stroke oil. Can you take a picture of the crankcase oil cap?

Feb 04, 2015 | Honda Motorcycles

1 Answer

2004 Honda Elite 80 Base owners manual

Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee around $10 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download for viewing or printing.
To download your manual please click on the blue links below. Good luck and have a wonderful day
Honda CH80 Service Manual
Honda Elite 80 2004
Honda Elite Wikipedia

Aug 12, 2014 | 2004 Honda Elite 80 Base

1 Answer

Headlight assembly repair 1984 honda elite

Where to find a head light motor for a 1984 Honda elite cb125. Part number 33210-KJ9-670. I have tried to fix my old one no luck. Brushes look ok and motor will turn if I take it out of its holder.

Jul 22, 2012 | 2006 Honda Elite 80

1 Answer

Best tires for 1982 GL1100?

Dunlop Elite II tire will give you the best mileage and handling If they are still available in your size. MY friends BMW K75rt and my GL1000 both got 40,000 miles before we needed replacement. Before that I got 50,000 out of a pair of Dunlop Tour Elites on a CX500 Honda. I sold that bike with the tires still on it and they looked OK.Unfortunately , I have no experience with the Dunlop Elite III, other than hearing many noise complaints.

May 14, 2010 | 1982 Honda GL 1100 Gold Wing

2 Answers

I've got a 76 Honda CB200T in really nice condition with 7K miles. It starts and runs well but seems to only want to do about 55mph (6500 RPM). I know the redline isn't 'til about 9300, but this bike just...

The CB200 may be able to do better when new however being only 200CC and the age of the machine this may be its best. You could check the compression to see what you have; if these are lower there would be some lose of power there. Also the carbs may need a once over, this too may get you more. However I would not expect to cruise at 65MPH with a 200CC, she'd be running pretty hard. The redline may not be unitil 9300RPM however the engine lacks the torque/power to push it beyond where you're at now, the 9300RPM may be used to get you there. In theory if you could take it out in max. gear to 9300RPM the bike would do @ 110MPH; many 750CC bikes cannot do this.
Great bike though, should treat you well, enjoy the ride and the gas mileage...

Oct 29, 2009 | 1974 Honda CB 200

1 Answer

1988 honda cr125 water pump shaft leak

Go to the site below and download a free service manual for your bike. The manual will really help you, and it is faster than my one finger keystrokes.

Apr 27, 2009 | 1988 Honda XR 250 R

1 Answer

Getting smooth tires

I like the dunlop elite I just changed mine after 16k miles and probably could have riden them another 2k of so but I had a new set on the shelf

Apr 11, 2009 | 1997 Honda F6 C Valkyrie

1 Answer

2002 honda elite scooter

All you need is a philips head screwdriver, start with the tail cover. underneath you find a 10mm bolt (socket) than 2 more screws, one obeve the foot peg and one close to the lock for the seat. An 18mm socket for the sparkplug.
Good luck, Cees
This is a great site!

Jun 10, 2008 | 2002 Honda Civic

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

660 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75797 Answers


Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides