Question about 2008 Honda GL 1800 Gold wing Deluxe

1 Answer

Brake lights stay s on

When the bike is cool, the brake lights work. After riding for awhile, the brake lights stays on. When the bike has stop for an hour or so, the brake lights work. When I start riding the brake lights stays on.

Posted by on

  • Anonymous Mar 23, 2014

    The brake light stays on all of the time... I cannot get it to go off for anything in the world. It is coming from the Back BRAKE, because I disconnected the front brake plug trying to find the problem.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 152 Answers

Check the wiring harness from the break light to the main harness , sounds like the the wire is moving and possibly shorting on the frame..

Posted on May 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are abs, oil, brake lights coming on, speedometer stops working, ac stopped cooling?


That's still under warranty, is it not? Take it to the dealer - let the manufacturer pay for the fix.

Aug 10, 2014 | 2010 Scion xB

1 Answer

FI lights stays on, popped on last night while


FI means fuel injection and your bikes computer is picking up a problem and letting you know that maintenance has to be performed for peak efficiency. you can go to the dealer and have them read the codes and you can decide whose going to do the repairs. or just try some Seafoam, buy it at Autozone pour 1/3 to 2 gallons fuel, it wont hurt it, and ride it around getting on every once in awhile, for about 10 to 15 miles, then you might have to disconnect the battery to reset the light...these are just the cheapest things to try. let me get some feedback on this thanks!

Apr 03, 2010 | 2001 Honda CBR 929 RR Fireblade

1 Answer

Everything eletrical shut off


could well be..check the fuse's in the fuse box...its under the seat

Mar 06, 2010 | 2002 Suzuki GSX-R 600 M

1 Answer

2008 Harley Davidson CVO Ultra classic and my ABS light stays on


i wouldnt ride a bike with the brake lite on - get it taken care of

Jul 30, 2009 | 2004 Harley Davidson XL 883 Sportster

1 Answer

When I first start riding the bike, the brake lights work. After riding for a while, the brake lights stays on. When the the bike has had a chance to cool off, the brake lights work. After riding for an...


The brake light switch should be mounted to the back side of the rear brake pedal housing. My best guess is that the brake switch is heating up when the engine heats up, and is sticking. Clean the exposed part of the shaft of the brake switch plunger and give it a squirt of WD-40, Teflon, or other lubricant where it goes into the housing. Work it manually a few times to distribute the lubricant. If that doesn't do it, take the switch off and disassemble it carefully. Assuming the little spring and contactor don't go flying off and get lost, you should be able to clean and reassemble the switch. Seeing as how I have big fat fingers, poor close up vision without bifocals, and limited patience, I would suggest just buying a new switch just to save on the aggravation.

May 10, 2009 | 2008 Honda GL 1800 Gold wing Deluxe

1 Answer

Brake lights


Also check the battery terminals and make sure you have a good ground 

May 10, 2009 | 2008 Honda GL 1800 Gold wing Deluxe

1 Answer

My brake lights stay on on my Toyota and the


Try pulling your brake pedal up and see if that causes the brake lights to turn off. The problem is most likely a bad brake switch that fits up under your dash and is attached to your pedal, it may not be releasing right and causing your lights to stay on. Hope this helps. Let me know how it goes and I will see if I can help some more if needed...

May 07, 2009 | 1983 Toyota Corolla Deluxe

2 Answers

Abs light flashing alternatively when putting ignition on


There is a simple way to fix it as I've discovered. Start your bike, if lights are flashing ride for a mile or two applying the rear brake a few times. Stop the bike and place on centre stand. switch off motor then restart. Your flashing lights should have gone. Why the flashing happens is if you ride and use your rear brake rarely and then your bike sits for a day or two without use your rear brake assembly fully retracts, ie pads away from disc and ABS gizzmos inactive. The ABS sensor unit then reports extended non use pattern to the onboard 'brain' which activates the warning mode of flashing lights. This has worked for me several times over the last 5 years when its occured. Full ABS operations return. Tried it on a mates bike and it fixed same problem on his.

Apr 10, 2009 | 1999 BMW R 1100 RT (ABS)

1 Answer

My 2003 1200 gt warning light comes on when I touch the brakes either front or rear and stays on. If I don't touch brakes it doesn't come on. the fluid in the rear reservoir got down to the min level and I...


Rene - the manual recommends having the break system checked immediately if the reservoir drops below MIN. It has happened to me once were the warning light was staying on and after carefully riding it down the street in my subdivision the warning light went away.

However if it does not go out after the self diagnostic - there is a possibility the ABS is not functioning and you are only left with a RESIDUAL BRAKING FUNCTION which helps slow the bike but not safe for riding. I would take it to the dealer if the warning stays on and for safety sake -- have it towed.

Jan 23, 2009 | 2003 BMW K 1200 GT

Not finding what you are looking for?
2008 Honda GL 1800 Gold wing Deluxe Logo

Related Topics:

442 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...