Question about 1994 Suzuki GSX 750 F (Katana)

2 Answers

What order do the wires go coming off the coils to the plugs

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

On my 1991 katana gsx750f the ignition coil wires 2 and 3 are connected to the right coil and 1 and 4 is the left coil. Firing order is 1243. First cylinder is the far left and the far right cylinder is 4. On the left coil the off white or light grey wire was on top and the orange on bottom. Be patient ripping down an engine.

Posted on Jul 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Almost always, seated on the bike the lefthand ignition coil supplies cylinders 1 (extreme left) and 4 (extreme right) while the right hand supplies the mid 2 & 3.

Good luck and thank you for using Fixya.

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can any body tell me which coil is the intake and which one is the exhaust?


Go to "youtube" type in your year make and model/ plug wires to coil.

May 07, 2017 | Nissan Cars & Trucks

1 Answer

What is the Wire Order with distributor?


theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Aug 15, 2015 | 1987 Buick Regal

2 Answers

What is the order of spark plug wires on a 2003 monte carlo with a 3.8L in it? It has aftermarket coils so no numbers.


at the factory they put numbers on top of the coils to
get the spark plug wires in the right order , but when
you replace the coils it does not matter the numbers they
all work the same what it matter is to put the right wires in it
3.8 V6 the order is in front of the car the first coil two spark plug wires # 1 and # 4,second coil #5 and #2 the next coil #3 and #6 now in front of the car wires are front left to right you got
# 1# 3 # 5 on the back of the engine you got from left to right #2 # 4 #6 you get them wrong the car will misfire or it won't start ... good luck..

Mar 04, 2015 | 2003 Chevrolet Monte Carlo

1 Answer

What is the proper firing order of spark plug wires on a 1982 Kawasaki kz1000?


The coils are for cylinders #1 & #4 on one coil and #2 and #3 on the other, the wire connects to the coil and then to the spark plug. Only wire length dictates what port on the coil to use. Just make sure #1 and #4 are on the same coil and you will be fine.

Oct 11, 2014 | Motorcycles

1 Answer

I had two spark plug wires come off the coil,need the firing order on the motor and coil,It's a 3.9V6


STANDING FRONT OF VECHICLE CYLINDERS FACING YOU ARE 4 5 6 AND BACK CYLINDERS IS 1 2 3 NOW ON PIECE PAPER LOOKING AT IGNITION COIL PACK FACING YOU WRITE BACK NUMBERS 123 AND UNDER THAT NUMBER 1 2 3 WRITE FRONT NUMBERS 5 6 4 THATS YOUR COIL PACK PLUG WIRES LOCATION. LIKE I SAY 5 6 4 IS PLUGS WIRES LOCATION FACING YOU AND BACK NUMBERS 1 2 3 PLUG WIRES LOCATION ON COIL PACK. FIRING ORDER IS 1 4 2 5 3 6

Apr 04, 2011 | 2004 Ford Freestar

1 Answer

What order do the spark plug wires go in on a 2000 kia sportage?


Basically the coil pack in the rear of the engine feeds cylinder #4 and there is a a plug wire off of that coil pack also that feeds cylinder #1. The coil that sits toward the front of the engine feeds cylinder #2 and the plug wire coming off that coil pack feeds cylinder #3. Each coil pack has a white plastic connector that can fit either coil but the length of the wires to each coil is different and should be easy to distinguish which coil pack each connects to. -cylinder #1 would be at the front of the engine and cylinder #4 would be at the rear.

May 12, 2010 | 2000 Kia Sportage

1 Answer

Ingnition coil b code is on how to change the coil


Do you have coil over each plug or is it a coil pack for all plugs. If each plugs has a coil, they have small screws to remove, pull the plug wire out after this. But if the coil pack, label each plug wire to keep them in order. the pack can be removed easily. It should have 4 screw, once those are out the coil pack will come off. Make sure after replacing it, you use di-electric grease on the bottom of the pack or in the coil over plug method. This keeps run-away spark and can cause mis-fire.

Jan 05, 2010 | 2005 Ford Escape

1 Answer

I need the diagram to put the spark plug cables


2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
Spark Plug Wires - Removal & Installation

3.5L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  2. Remove the intake manifold cover, if required.
  3. Disconnect the left side spark plug wires from the spark plugs.
  4. Disconnect the left side spark plug wires from the ignition coil.
  5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
  6. Remove the spark plug wire assembly.
  7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
  8. Disconnect the right side spark plug wires from the spark plugs.
  9. Disconnect the right side spark plugs from the ignition coils.
  10. Remove the spark plug wire assembly.
  11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
To install:
  1. Install the spark plug wire assembly.
  2. Connect the right side spark plugs to the ignition coils.
  3. Connect the right side spark plug wires to the spark plugs.
  4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
  5. Install the spark plug wire assembly.
  6. Connect the left side spark plug wires to the spark plugs.
  7. Connect the left side spark plug wires to the ignition coil.
  8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
  9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
  10. Install the intake manifold cover, if required.

Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
74d742b.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
306b531.jpg


Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
9313fa7.jpg


Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
2c9af72.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
d929c16.jpg


Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
f357cd3.jpg

Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
09e9db9.jpg

I really hope help you with this (remember rated this help) Good luck.

Sep 23, 2009 | 2003 Chevrolet Malibu

1 Answer

How do i plug in the spark plug coils? what order?


If it's the four cyl., the first coil pack bolts over the #2 spark plug. The #2 coil pack wire plugs into #3 spark plug. The number two coil pack bolts directly over the number four spark plug, and the #2 coil pack wire plugs into the #4 plug. The firing order is 1-4-2-3.

Jun 30, 2009 | 2000 Mazda Protege

1 Answer

I need the firing order for a 1996 suzuki rf street bike


The spark plugs on this bike fire # 1 & 3 and 2 & 4 at the same time. Number 1 fires first so there is no worry on plug wires if that's your concern. There is only 2 coils and 2 plug wires coming out of each. Make sure you connect the wires from the # 1 coil to # 3 and the other coil is # 2 and # 4.
Let me know if you need any other specific information.
Regards,
RSelvy

Jan 02, 2009 | 1996 Suzuki RF 600 R

Not finding what you are looking for?
1994 Suzuki GSX 750 F (Katana) Logo

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...