Question about Harley Davidson FXD Dyna Super Glide Motorcycles
Posted by Anonymous on
Hi Anonymous, perform the following tests:
1. Fill acid type batteries to proper levels.
2. Charge battery overnight at 1-2 amps you need 12 volts or better after charging.
3. Make sure all connections are clean and tight especially the negative cable at both ends.
4. Hook up volt meter to battery and start engine, if meter falls below 9.5 v replace battery.
5. With engine running at 3600 RPM battery should read 14.3-14.7 volts if not continue tests.
6. Unplug voltage regulator from alternator at crankcase by front of primary cover.
7. To test voltage regulator go to: https://www.youtube.com/watch?v=F8EjV0IjW9Q
8. With ohm meter, one lead grounded, touch alternator pin meter should read infinity, if not replace stator.
9. With ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator.
10. With volt meter set on AC scale, both leads touching alternator pins meter should read
16 to 20 volts AC for every 1000 RPM'S 1989 and later and 19 to 26 volts AC for every 1000 RPMS. If not replace rotor. Good luck
Posted on May 17, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
heres how its done
remove the seat , then battery neg. cable at frame, positive at terminal, then feel around the outside of the box - there is a rear lower bolt and an upper bolt - - this will cause the battery tray to swing down when they are removed. Orient the new battery same as the old one... reverse the process..... thats it
Posted on Mar 23, 2009
SOURCE: oil change
go to fixmyhog.com and purchase the fix my hog dvd for softail/dynas. it shows complete video for all the general harley maintenance. it's worth it's weight in gold for all the money it has saved me in doing my own maintenance on my 05 fxd. i have mantained my scoot since it was brand new. 29,00 mles later, it still runs great !
Posted on Mar 25, 2009
remove the drain plug from the oil pan, you will need either a 3/4" box wrench or a 5/8" box wrench and the drain plug will be facing forward on the the oil pan. It is easiest to remove this drain plug from under the right side of the bike. put drain plug back in after about 10 m,inutes of drain time and tighten to 18 ft. lbs. Dont forget to change the oil filter as well.
Posted on Oct 28, 2009
There are many service manuals available for your bike. Of course, the factory service manuals are the best and you should be able to order one at any local dealer.
If not, there are other sources for both the original Harley manuals and other manuals. Do a search on the internet for motorcycle service manuals. Two such places are www.motolit.com and www.motorcyclebooks.com A service manual should not be difficult to find.
Posted on Apr 14, 2010
Tips for a great answer:
Nov 15, 2016 | 2006 Harley Davidson FXDCI Dyna Super...
Aug 17, 2014 | 2006 Harley Davidson FXDCI Dyna Super...
Aug 31, 2013 | 2004 Harley Davidson FXDWG - FXDWGI Dyna...
Mar 19, 2013 | 2009 Harley Davidson FXD Dyna Super Glide
Jun 18, 2012 | 2002 Harley Davidson FXD Dyna Super Glide
Aug 23, 2011 | 2009 Harley Davidson FXD Dyna Super Glide
Mar 17, 2010 | Harley Davidson FXD Dyna Super Glide...
Feb 14, 2010 | 2001 Harley Davidson FXDXT Dyna Super...
Sep 23, 2009 | 2000 Harley Davidson FXDWG Dyna Wide Glide
Jun 07, 2009 | 2002 Harley Davidson FXD Dyna Super Glide
59 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: