Question about 1997 Honda VTR 1000 F Firestorm

1 Answer

How to bleed a clutch on a vtr1000 - 1997 Honda VTR 1000 F Firestorm

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 40,655 Answers

Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch and Brake bleed how to video SuperHawk Forum
fix clutch on honda vtr1000 wmv
Honda VTR1000F Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VTR1000F Fire Storm Owner Manual

Posted on Sep 12, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bleed clutch cylinder for Nissan Sandra 2010


bleed clutch cylinder Robinny, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Bleeding clutch
Clutch bleed how to
Nissan Altima 2007 2012 Service Manual Clutch fluid On vehicle maintenance...
Help clutch bleeding Fail

Jul 19, 2016 | Nissan Cars & Trucks

1 Answer

How do bleed the clutch,on a vtr1000.


vtr1000 I believe your referring to a Honda...
OK,,,,
this is very difficult to explain. I don't think there is a bleeder plug for the bike, you need to open up the clutch reservoir on the right handle bar.. I know of a video that will help...
> make sure you cover all exposed paint and plastics on your bike first.
> If at any time you feel lost or uncomfortable take it to a shop but I'm confident you can do it.
> just watch the reservoir so that it doesn't overflow
> This is a great video...

Sep 11, 2015 | Motorcycles

1 Answer

Vtr1000 clutch problem


do you mean the clutch wont allow you to engauge 1st gear from neutral ? if so then clutch plates are stuck together , try warming up engine first then get a friend to push you while engine running in neutral and pop into 2nd ( without clutch ) and ride round for a while then pull clutch in ( at fair speed to keep rolling ) and stamp on the rear brake , mite take several attemps , and this should free the plates ! Check gear oil for signs of water also , but this can happen if bike stood for several months ! hope this helped ? P...

Dec 26, 2013 | Motorcycles

1 Answer

How do i bleed clutch on fiat dublo


Clutch systems bleed just like brakes, if you have an external leak at the clutch master cylinder, then bleeding will be difficult, it should be replaced. I use a two person bleeding system, I fill the master, crack the bleeder screw open and have my 2nd push the clutch down and hold it, then I close the bleeder and tell my 2nd to release the pedal, repeat until no air is present.

Sep 11, 2012 | Fiat Doblo Cars & Trucks

1 Answer

Clutch reservior went dry. I could not shift. How do you fix this.


Any evidence of leaking frorm the clutch lever area or lines down to the clutch? Remove the cover on the clutch reservoir and fill. squeeze handle slowly to see if there is bubbles or fluid spray. Will most likely have to bleed the clutch. Bleed is on left side lower end of the clutch hose. Squeeze clutch lever several times and open the bleed. Close bleed and do again. When you get good solid flow of fluid, should have a good clutch. Look for leaks.

Apr 14, 2011 | Yamaha Royal Star Tour Deluxe Motorcycles

3 Answers

How do you bleed the clutch hydraulic system on a 2008 Mustang?


you bleed a hydraulic clutch the same way you bleed a brake system and it uses brake fluid as well.you keep bleeding until there is no more air in the clutch system.there should be a bleeder screw on the clutch slave cylinder that is were you bleed the clutch from.

Mar 18, 2011 | 2008 Ford Mustang

1 Answer

My clutch is not angaging need to see how can i bleed


Hydraulic Clutch System BLEEDING The clutch system can be bled using a pressure bleeder. Follow the instructions that come with the pressure bleeder for the proper pressure bleeding procedure. The maximum line pressure while pressure bleeding must not exceed 36 psi (248 kPa). NOTE: To bleed a clutch manually requires the assistance of a second person, a section of hose that is compatible with brake fluid (preferably clear) and fits the slave cylinder bleed screw snugly and a container to catch the fluid that is bled through the system. As brake hydraulic fluid easily absorbs moisture, always use fresh fluid when bleeding a hydraulic system.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. To bleed the system perform the following:
    1. Top off the hydraulic fluid reservoir using a fluid that meets the standards of the vehicle's hydraulic system.
    2. Open the clutch slave cylinder bleed screw and press the clutch pedal to the floor and hold the pedal down.
    3. Close the clutch slave cylinder bleed screw.
    4. Release the clutch pedal.
    5. Check the hydraulic fluid level and top off as necessary.
  3. Repeat the above steps until the discharged fluid is clean and no air bubbles appear during the bleeding process.
prev.gif next.gif

Aug 03, 2010 | 1998 Audi A4

1 Answer

My front brakes on my vtr1000 are really soft


You have air in the brake line ,you need to get rid of the air by bleeding the whole front brake system

Mar 20, 2010 | 2000 Honda VTR 1000 SP-1 (RC51)

1 Answer

Vtr1000 firestorm clutch cover corroded want to repair not sure how to go about it paint or polish as i think it is magnesium


its called liquid metal or can use JB weld for a temp fix. best send it to tig welder to repair or ebay another unit

for paint sand 120 light primer then 240

Dec 17, 2009 | 2003 Honda VTR 1000 SP-2 (RC51)

1 Answer

Clutch problem vtr1000


the cover that you took off to do the front sproket is where the clutch push rod gets pushed by the slave cylinder take cover off thats the only thing that could go wrong

May 09, 2009 | 1997 Honda VTR 1000 F Firestorm

Not finding what you are looking for?
1997 Honda VTR 1000 F Firestorm Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...