How to adjust valve lash on a 1990 Geo Storm
its an Isuzu engine.
there are 3 engines.
4XE1, SOHC 1.6L (base)12valves
4XE1, DOHC , 1.6L same as above but now with 16valves.
4XE1, DOHC, 1.8L bends valves if belt snaps...
note the bad idea of ISUZU calling all 3 engine same name.
a horrid idea.
which one? the second was in USA and Canada only.
the second one was offered as the GSI. is yours that?
so I will attempt to guess for you, its the base engine.
(odds of coin toss)
toss #2, USA, SOHC
guess 3: did a new belt and want to do lash next. Cam belt>
No job stated so i guess 3 times.
SOHC 1.6L only (FSM book quote)
Check the valve lash between the rocker arm and valve stem on both the intake and exhaust valves on the number 1 cylinder, the intake valve(s) on the number 2 cylinder and the exhaust valve on the number 3 cylinder. If the valve lash on the intake valves is not 0.006 in. (0.15mm), adjust the valve lash. If the valve lash on the exhaust valve is not 0.010 in. (0.25mm), adjust the valve lash.
1.6L twin cam has shims.
1.8L has HLA , no lash to set.
HLA= Hydraulic Lash adjusters.
I posted this before, search for it. Im only doing 1 engine.
Apr 12, 2014 |
1990 Geo Storm