Question about 2007 Yamaha YZF-R1
07 r1 will not go past 114 mph 4th 5th or 6th gear. almost like is governed
Posted by Anonymous on
Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2007 Yamaha YZF R1
OEM parts for Yamaha
Posted on Aug 19, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: r1 gearbox
You have a bent shift fork. The engine comes out and the bottom case gets removed. This exposes the gears and below the gears, the shift drum and shift forks. Generally speaking this is not a job for the Saturday mechanic. Some special tools are involved.
Please rate this solution. Thanks!
Posted on Apr 08, 2009
This behavior is the symptom that your clutch plates are getting worn out. Since power is transmitted from the cam shaft to the front sprocket (smaller dia) is better at lower gears but once the rpm increases the clutch plates do not catch up with the cams rotation, hence slipping at higher gears & in between 4th & 5th gears the pulling power of the engine seems to go to neutral before engaging again. Check your clutch plates as well as the sprocket-chain- rear sprocket for wearing out of the gear teeth & replace if required. You will get back full power & acceleration as when the bike was new.............sodeep
Posted on Aug 19, 2009
SOURCE: 2006 R6 Shifting Problem
Howdy: The 3rd and 4th gears are used the most, after awhile the dog and shifting forks get worn more. Try changing to Yamaha Lube simi-syn oil 10/40. Drain oil after warm up (get trans oil warm). The oil is in a silver 4gal containe at the Yamaha dealer. This oil has helped me.
Good luck - Doug
Posted on Dec 09, 2009
sounds like your going to have to split the casses to fix trany to me. sorry the same thing hapened to my 2001 blaster.
Posted on Jun 09, 2010
Tips for a great answer:
Jun 16, 2014 | Mazda CX7 Cars & Trucks
May 22, 2014 | 2001 Pontiac Firebird
May 19, 2014 | 2000 Yamaha YZF-R1
Oct 22, 2013 | Harley Davidson FLHTCUI Electra Glide...
Aug 13, 2013 | Yamaha Royal Star XVZ 1300 A Motorcycles
Sep 12, 2012 | 2008 Yamaha V Star Custom
Oct 14, 2009 | 2007 Mazda Speed 6 Sedan
Nov 18, 2008 | Volkswagen New Gti Cars & Trucks
Nov 10, 2008 | 1994 Yamaha FZX 750
Nov 10, 2008 | 2002 Ducati 750 SS
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: