Question about Sherco Motorcycles

Open Question

Sherco 2013 300i se keeps cutting out - Sherco Motorcycles

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sherco 300 SEF-R spilling oil out breather pipe


Hi, Manfred oil level readings are taken when the engine has reached normal operating temperature and the usual suspects are:
1. Overfilled oil tank dipstick reading should at or below full.
2. If the sight glass is full you are running to much oil. 3. Excessive blowby caused by worn out piston rings.
4. Piston rings never properly seated.
5. Faulty breather valve or system.
6. Pinched or clogged breather line/hose.
7. Clogged or failed oil filter.
8. Contaminated oil dirt-rust-water etc.
9. Excessive oil foaming.
10. Wrong oil type not designed for your bike.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a wonderful day.
http://shercoforum.com/index.php?topic=1016.0
http://www.dirtbikeworld.net/forum/archive/index.php/f-98.html SHERCO 2014 250 SEF Workshop Manual
Spare Parts Sherco English
SHERCO 2014 250 SE Owner Manual

Mar 19, 2017 | Sherco Motorcycles

1 Answer

Sherco running rough


strip and clean carb and clean out tank , replace plug and ht cap !

Mar 17, 2013 | 2011 Sherco ST 08

1 Answer

WHERE DO DO YOU PUT THE 2 STROKE OIL MIX IN A SHERCO SM50


hi i dont know these bikes personally but,they will have a seperate tank for the two stroke oil,you will probably find it behind one of the side covers,do not put it directly into the fuel tank,that will cause all sorts of drama,as the oil(being heavier than the fuel)will sink straight to the bottom of the tank,fill the carb with oil,then you will never get it started,hope this helps...cheers

Apr 29, 2010 | 2007 Sherco 5.1i

1 Answer

My 2004 sherco 290 is failing to select 5th gear


need to check all gears and selecters , strip engine

Nov 14, 2009 | 2007 Sherco 4.5i SM

1 Answer

My 2005 Sherco 290 trials bike stalls when hot


Best would be to blow compressed air to the jets and also to check and reset the float level.
Hope this helps!

Oct 31, 2009 | 2007 Sherco 4.5i SM

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sherco Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sherco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...