Question about Suzuki Motorcycles

1 Answer

Dipped headlights suzuki gz 125, problem is that the front dipped dosnt work but also the rear half beam.. they were both working fine a few weeks ago and only noticed the other day, have full main beam and brake lights? bike is a 1999 model

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Suzuki Master
  • 1,554 Answers

Did you check if one of the bulb elements are burned out?

The single head light has two elements (high beam and low beam).
Usually, you ride with the low beam on all the time, so it's the first to burn out, leaving the high beam still working.

If the tail light/brake light is a single bulb, same thing.

Posted on Nov 24, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Suzuki VL intruder 125 back brake sticking and braklight stuck on

i too had this problem .....dnt worry just remove the brake cable and lubricate it with some spray like ABRO or WD40 lubricating spray then you sprayed some in the cable.play with it pull it forward and push it backward.,lubricate and repeat the steps till you find the cable goes smoother...you know it usually happens due to dust and dirt which enters the cable n get it stuck,try this n tell me..

Posted on Mar 27, 2009

  • 230 Answers

SOURCE: cbr 125 rw 7 instrument panel

Sounds like you have a ground fault. I once had a car with a faulty ground wire on the headlight, when I put high beam on the speedo would jump to 170km/h and the indicators would glow dimly. Sure sounds like a similar ground fault to me, check all the ground straps, from the headlight or anywhere else you can think of.

Posted on May 25, 2009

  • 1 Answer

SOURCE: yamaha DT 125 2003 Main beam headlight keeps

i have well, had a very similar problem, my headlight kept going on my 1990 dt125r from 1990 to 2003 the engine is the same so i feel it may be the same fix, the regulator/rectifier stopped working properly and was alowying to much power to get to the headlight and blew it, i got a new regulator/rectifier for around £30 ish, you could tell when it went caus the higher you reved it the brighter the light got until it blew not like when it gets brighter from tickover, it was just proggesive and just kept getting brighter the more you revved it, hope this helps

Posted on Aug 06, 2009

SOURCE: Headlight fuse keeps blowing. It blows when I

There seems to be a short circuit to the head light wiring....you'll have to trace it...

Posted on Oct 24, 2009

  • 440 Answers

SOURCE: Rear tail lights and running lights not working.

Make sure that the rear light fuse is not blown
If not trace the brown wire from the rear lights & check for continuity between lamp holder & fuse
As its both rear lights & front sidelights it will not be an earth fault

Hope this helps (if so please mark as very helpful)

Ride Safe
Bike-Doc

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mito lights not work


Hi, Max if your headlight is not working, keeps burning out or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn, chaffed, or broken wires in the light circuit.
3. Corroded, broken, or loose pins/sockets in wire connectors.
4. Faulty hi/lo beam switch.
5. Faulty ignition switch.
6. Fuse is good but no continuity on both sides.
7. Faulty wiring between battery positive and headlight bulb socket.
8. Weak charging alternator/generator.
9. Faulty voltage regulator/rectifier, overcharging.
For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have nice a day.Cagiva mito 125 electrical lights problem
Dipped beam not working
Free Cagiva Motorcycle Service Manuals for download
http://www.oemmotorparts.com/oem2.asp?M=Cagiva
http://www.cagiva.nl/media/owner_manuals/?tx_motomondo_pi4%5Bmodel%5D=&tx_motomondo_pi4%5Byear%5D=-1&tx_motomondo_pi4%5Bmanual%5D=

May 01, 2014 | 2000 Cagiva Mito 125 Evoluzione

1 Answer

Headlight Relay for Suzuki Vitara 1995


If you still do not have an answer, I found a possible solution I just used a couple weeks ago. Call the Suzuki/Mitsubishi dealer in Indianapolis, Indiana. Ask for the parts department or the service department, and see if they can help you with the solution. I just did, and they were great! Blessings, Dave in Florida.

Jun 05, 2013 | Vehicle Parts & Accessories

1 Answer

Marauder GZ125 98 - dead, no lights, no power, nothing.


Hi, Anonymous if your headlight is not working, only one beam works, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Suzuki GZ125 marauder that won power on at all
Suzuki Marauder GZ125 electrical issue
Suzuki GZ 125 Marauder 2005 2007 Haynes Service Repair Manual 0888 eBay
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

Apr 08, 2017 | Suzuki GZ 125 Marauder Motorcycles

1 Answer

Suzuki gz 125cc wont start


On your left hand side, take off the front sprocket's cover and you will see an oval part bolted on the left crankcase with a wire running out of it right next to the stator's cover.Follow that wire and see if it is properly hooked on the harness.Unplug it from the harness and touch, the harness half part of it, to the chassis. Your neutral indicator should come on. If it doesn't, replace the indicator's bulb.If it does, then you need to replace that oval part which is the neutral switch

Feb 03, 2012 | Suzuki GZ 125 Marauder Motorcycles

1 Answer

How do i deristrict my suzuki GZ marauder?


Won't start 2008 Suzuki Marauder GZ125. The starter switch does not work every time when it doesn't I switch off give it a few seconds try again sometimes it works others it doesn't I try waggling steering sometimes that helps.

Sep 02, 2010 | 2000 Suzuki GZ 125 Marauder

1 Answer

Cbr 125 rw 7 instrument panel


Sounds like you have a ground fault. I once had a car with a faulty ground wire on the headlight, when I put high beam on the speedo would jump to 170km/h and the indicators would glow dimly. Sure sounds like a similar ground fault to me, check all the ground straps, from the headlight or anywhere else you can think of.

May 25, 2009 | 2005 Honda CBR 125 R

3 Answers

Suzuki gz 125 stalls when put into first gear


does this only happen when your side stand is down?? try it with the side stand up it had a safety cut off..

Nov 23, 2008 | 2003 Suzuki GZ 125 Marauder

1 Answer

Suzuki swift Headlight problem


Have you checked to see if this is a wiring problem or maybe a relay problem?

Recently my lights would work on side lights and not anything else and this was down to dodgy wiring and needed a new relay unit.

Jun 28, 2008 | 1998 Suzuki Swift

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...