Question about 2007 Suzuki GSF 1250 Bandit S

Open Question

Indicator lights wiring

Suzuki gsf 1250 front turn indicator wiring

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2336 Answers

SOURCE: raise the seat

First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Posted on Nov 10, 2008

Ad
  • 3567 Answers

SOURCE: suzuki gsf 1200 s bandit

Christmas comes early. Go to the site below and you can download a free PDF service manual. Yours is the 1st one in the "Suzuki GSF" section of the list. 4 or 5 below that is a PDF parts diagram with part numbers.

http://www.carlsalter.com/motorcycle-manuals.asp Most manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language.

Top rating due for this answer! Thanks Asel :)

Posted on May 08, 2009

slave2aslave
  • 302 Answers

SOURCE: needs wiring diagram for suzuki banhdit gsf 650 k8

http://netfree1.blogspot.com/2008/09/suzuki-gsf650-bandit-service-repair.html
Hope this helps.

Posted on Nov 19, 2009

  • 270 Answers

SOURCE: From where can I download Manual of the Suzuki bandit gsf

type the diplodocs.com, then write down the suzuki brand in advance search box, then click the suzuki motorcycle manual, then you can choose different kind of downloadable manual of motorbikes.. try to open the 2009 folder, there is the gsf manual there..

Posted on Jun 06, 2010

rzman
  • 148 Answers

SOURCE: My Suzuki gsf 650 bandit

Hi,,it sounds like a wire in the indicator circuit is shorting out somewhere,,,for starters remove the head light,,trace where the indicator wires go from the indicator switch,and check all the wires all the way to the rear indicators,,,look for loose or burnt connections.

good luck

Posted on Mar 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

07 bandit 1250 shows chec on clocks turns over fine but will not start


When the display indicates 'CHEC', check following items:
* Make sure that the engine stop switch is in the (on) position.
* Make sure that the transmission is in neutral or the side stand is fully up.

If the display still indicates "CHEC" after checking the above items, inspect the ignition fuse and the connection of the lead wire couplers

Aug 29, 2014 | 2007 Suzuki GSF 1250 Bandit S

1 Answer

No headlights on 1250 bandit


Hi Anonymous, if your headlight is not working the first thing to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply to headlight bulb socket.
2. Faulty hi/lo beam switch.
3. Faulty ignition switch.
4. Fuse is good but no continuity on both sides.
5. Faulty wiring between battery positive and headlight bulb socket.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
https://www.tradebit.com/filesharing.php/search/0/2007+suzuki+gsf+1250+bandit

Apr 07, 2013 | 2007 Suzuki GSF 1250 Bandit

1 Answer

Will a Suzuki bandit 1200 starter motor fit a 1250 bandit?


check they are similar if so the only difference could be the teeth of the drive therse no reason not to work if the teeth are the same in number

Jan 01, 2012 | 2007 Suzuki GSF 1250 Bandit S

1 Answer

My Suzuki gsf 650 bandit 2005 is having indicating problems, when i turn the indicator on my dashboard cuts out and rev counter freezes and the backlight on the dashboard flashes as though its the...


Hi,,it sounds like a wire in the indicator circuit is shorting out somewhere,,,for starters remove the head light,,trace where the indicator wires go from the indicator switch,and check all the wires all the way to the rear indicators,,,look for loose or burnt connections.

good luck

Mar 25, 2011 | Suzuki GSF 650 N Bandit Motorcycles

1 Answer

Which colour wire is the live feed to my rear light? I am talking about the 3 wires that go directly into the bulb. They are grey, black/grey and white/back.


turn the ignition switch on with a multi meter turned ot DC 15 volts touch each wire with the red line and the black grounded to the frame or the negative side of the battery. when it shows a reading that is your feed wire. I believe it is a black wire with a white line.

Feb 04, 2010 | 2007 Suzuki GSF 1250 Bandit

1 Answer

HI i NEED TO REMOVE 2 WIRES FROM THE IAT SENSOR PLUG ON A K8 1250 SUZUKI BANDIT, I CAN NOT WORK OUT HOW TO GET THE WIRES OUT OF THE 5 WIRE PLUG WITH OUT DAMAGING IT,CAN YOU HELP ME ?


Looking at the face of the plug, there should be a center part that is a different color, and can be removed. Once removed, you can use a small pick and release the locking tab on the wire you wish to remove. Hold up on the locking tab, and pull the wire out. When you are done, replace the plug, and all should be fine.

Jun 15, 2009 | 2007 Suzuki GSF 1250 Bandit

1 Answer

Wiring diagram


You can download a free PDF service manual at the site below. Listed is a 1200 Bandit, among others. The wiring diagram should pretty well match your 1250. The service for the motor will pretty well match as well.

http://www.carlsalter.com/motorcycle-manuals.asp

Apr 13, 2009 | 2007 Suzuki GSF 1250 Bandit

1 Answer

SA indicator pushed int fairing.


undo the nut in the middle 1st - may save you from scratching the fairing

Dec 19, 2008 | 2007 Suzuki GSF 1250 Bandit S

Not finding what you are looking for?
2007 Suzuki GSF 1250 Bandit S Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...