Login into my account

This needs to be discussed in different situations, you can check whether these situations can solve your current problem.
Scenario 1: All Default Passwords Are Changed and All Passwords Are Forgotten If you change all default passwords and forget the console port login password, all STelnet/Telnet login accounts and passwords, and BootROM/BootLoad passwords:
·For a switch that has the PNP button, you can press and hold the PNP button for more than 6 seconds to restore the switch to factory settings and restart the switch. The following figure shows the PNP button.
·If the switch does not have the PNP button, return it to the factory for repair.
Scenario 2: Default Passwords Are Forgotten For S series switches running V200R020 and later versions, no passwords are configured for default accounts, and users must configure new passwords for logging in to the switches. In this situation, scenario 2 is not involved.
However, for S series switches running versions earlier than V200R020, there is no default STelnet/Telnet login password, but there are default console port login password, default BootROM/BootLoad password, and default web login password. These default passwords may vary according to the switch version.
If you always use the default passwords and have not changed the passwords, you can obtain the default accounts and passwords according to S Series Switches Default Usernames and Passwords (for enterprise users or carrier users). The permission level of this document is C (customer support level). If you need to upgrade the permission level, see the help document on the website.
Scenario 3: The Console Port Login Password Is Forgotten Three methods are available to recover the console port login password.
·Method 1: Log in to the device using STelnet or Telnet and change the console port login password.
·Method 2: Clear the console port login password in the BootROM/BootLoad menu and change the console port login password.
Scenario 4: The STelnet/Telnet Login Password Is Forgotten ·If you forget the login password of an STelnet/Telnet account, you can use another STelnet/Telnet account with administrator rights to log in to the device and reset the password. For details, see Method 1.
·If you forget the passwords of all STelnet/Telnet accounts but can log in to the device through the console port, see Method 2.

Method 1: Use an STelnet/Telnet Account with Administrator Rights to Log In to the Device and Reset the Password

1.Log in to the switch using the STelnet/Telnet account with administrator rights.
2.Change the STelnet/Telnet login password. The following example describes how to change the STelnet/Telnet login password of VTY0 to VTY4.

Method 2: Log In to the Device Through the Console Port and Set a New STelnet/Telnet Login Password

If you forget the STelnet/Telnet login password but remember the console port login password, log in to the switch through the console port and set a new STelnet/Telnet login password.
Scenario 5: The BootROM/BootLoad Password Is Forgotten but the Console Port/STelnet/Telnet Login Is Available If you can log in to the switch through the console port, STelnet, or Telnet, log in to the switch and restore the default BootROM/BootLoad password. You can obtain the default accounts and passwords according to S Series Switches Default Usernames and Passwords (for enterprise users or carrier users). The permission level of this document is C (customer support level). If you need to upgrade the permission level, see the help document on the website.
Scenario 6: The Web Login Password Is Forgotten but the Console Port/STelnet/Telnet Login Is Available If you can log in to the switch through the console port, STelnet, or Telnet, log in to the switch and reset the web login password. In the following example, the web login user name is admin123 and the password is test@123.
For more reference resources, please click to enter (ebook) CloudCampus 3.0 Solution:
https://support.huawei.com/enterprise/en/doc/EDOC1100201111
OR you can straight to see this decument
https://support.huawei.com/enterprise/en/doc/EDOC1100200698#section1612361212554

Hello.

There is a hidden Administrator account. Access that account and then reset your password.

Boot your system and continually press F8. Choose Safe Mode and at the login screen, enter Administrator for your login / username and leave the password area blank.

Login and go to the Control Panel and User Accounts. Select your account and enter the password you choose. Save and logout.

Login with your account and new password.

Hope this helps.

are you using windows XP if you are log into safe mode tap f8 upon powering the system till you get windows advance menu select safemode, in safemode log in try logging in as admiistrator leave password field blank if it logs in go to control panel and click user accounts change or manage user accounts select you log in with the lost password change the password or better remove the password then restart system log in using the user name u normaly use if it log directly that is good then ccreat a new password under that account profile ^_^ this should work but for vist and win7 it might be imoissuble to log into an administrator account you must at least know the password if you created one if not then reinstalling vista and win7 is the final option ^_^

Option 1: If the user you have is an administrator account, go to the control panel and select user accounts. When you are in user accounts, find the account you want to remove the password from and you will see the option there.

Option 2: If your user is NOT administrative, you can use ERD commander to reset it. You basically burn ERD onto a CD and it will boot when you restart. There is a program called Locksmith that will remove or change the password for you.

Most XP machines have a built in administrator account that normally does not have a password.

You can try pressing F8 before Windows starts up to go into the XP bootup menu.

Choose Safe mode

Once into safe mode you should either see an 'Administrator' account listed, or just type in Administrator and do not type a password. If that works, go to Start-->Control Panel-->User Accounts. From there you can create a new user account for you to use with administrative privileges.

If that doesn't work, try downloading a password reset utility, such as the one at http://home.eunet.no/~pnordahl/ntpasswd/

Hope this helps