Question about Motorcycles

Open Question

Scooter starter 50cc tgb - Motorcycles

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: My son's 2005 Kymco TGB 50cc scotter hit a good

Normally, one goes to the carb, one to the gearbox and one to the battery. What sounds really weird is the diameter of the hoses. Three quarter and one inch diameter? Normally 1/4" to 3/8".
Hope this helps!

Please rate this solution. Thanks locjaw69!

Posted on Apr 04, 2009

  • 3 Answers

SOURCE: TGB 101S 2006 50cc

new plugs first, put problem a bad coil

Posted on Jun 14, 2009

  • 3567 Answers

SOURCE: cant get my 50cc scooter to fire up-no spark. any

  • Do you see spark? If not, check the side stand kill switch. It kills the engine so that you don’t start out with the side stand down. If broken or out of adjustment, it would kill the spark. Check for a broken wire at the side stand switch and coupler. Try moving the side stand kill switch by hand. If that doesn’t work then wire a jumper around the switch to bypass it.
  • Is the handlebar kill switch on? Is it shorted out?
  • Check the fuses.
  • Check the operation of the ignition switch and all kill switches with a volt ohmmeter. Check the wiring harness. Did a wire come unplugged? Are all wires clean and with solid connections? Any abraded or pinched wires?
  • Is the bike in neutral and the neutral light is lit up? If no neutral light, check the neutral switch and neutral switch wire on center or side casing.
  • If still no spark, get CDI system and coils checked at the dealers shop.

Posted on Aug 14, 2009

  • 11 Answers

SOURCE: Aprilia 50cc Scooter, 06 model

iya mate ive just read your artical it could be your starter motor if not has your battery got enough power init to turn the electric start or try the kick start

Posted on Apr 04, 2010

  • 40 Answers

SOURCE: how to or can i

first major restrictor is in the exhaust pipe. Take off all the securing nuts and bolts to remove the pipe. You will notice in the end of the pipe that fits to the cylinder head there will be a washer that reduces the bore of the pipe. You will need to grind away the weld that secures this washer, clean out all metal particles and refit pipe to bike. This will dramatically improve the performance. Hope this helps' Alex.

Posted on May 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to derestrict the CDI of a 50cc TGB Bullet RS. Model 2013 or 2014


derestrict the CDI of a 50cc TGB Bullet Anon, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
ScooterCommunity
How to replace the cdi box on your scooter with performance cdi box
How to derestrict 50cc Scooter TuningMatters com

Jul 28, 2016 | 2006 TGB Laser

1 Answer

I recently bought a used tgb 101s power scooter and had a new battery installed the carburator cleaned new air filter blinker and brake cable, my problem is the scooter will not stay running


sounds like fuel starvation. Look for kinks or air in the fuel line or a faulty fuel tap. Also check the vent in the fuel tank cap.

Jul 01, 2016 | TGB Motorcycles

1 Answer

Where is the access to add oil to a tgb hawk


Hi, John for more information about your question and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Scooter Oil Change 101
TGB Scooters ScooterPoint
http://www.tgb-france.com/common/upload_fichier/servicemanual125250xmotion.pdf

Feb 11, 2016 | 2010 TGB Hawk 125

1 Answer

How to derestict acid on a tgb r50x


Sorry cannot understand your question

Oct 20, 2013 | RTO 50cc Moped Scooter

1 Answer

What is wrong with my 50cc scooter when i hit the starter button and it just clicks clicks in the relay?


I had same problem. I changed the starter and all is good. Before you do that, check all your connections at the battery, starter and grounds. File frame where ground meets it to ensure a good ground. Do the same for the other connections. Try it. If it still clicks, it;s the starter.

Dec 19, 2012 | RTO 50cc Moped Scooter

1 Answer

Hey guys i was just wondering if you could give me a hand with this problem i have been having for at least 2 months now, the problem is that my scooter doesnt start off the electric, but will start off...


Hi, For_shi_zo before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, especially "AGM" batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid or starter circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Scooter Troubleshooting Scooter won start All about Scooters
TGB R50X Part 1 Won Start Scooter Putting The Wiring Back To Standard On...
TGB Service Manual 101S BH1 303R 50 BR1 Delivery 50 BK1
https://www.ajsutton.co.uk/spares/chooseModel.asp?make=tgb&uID=0
TGB 50 2006

Apr 28, 2017 | 2006 TGB R 50 X

1 Answer

My son's 2005 Kymco TGB 50cc scotter hit a good


Normally, one goes to the carb, one to the gearbox and one to the battery. What sounds really weird is the diameter of the hoses. Three quarter and one inch diameter? Normally 1/4" to 3/8".
Hope this helps!

Please rate this solution. Thanks locjaw69!

Apr 04, 2009 | 2005 Kymco Stryker 125

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...