Question about kawasaki Motorcycles

1 Answer

Hi, just cleaned the fuel filter on my kawasaki 1400 gtr 2007 and I cant seem to get it to fire up. I can hear the pump prime and there is definatly fuel moving through the lines. I have checked the f

Need hepl please....

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • kawasaki Master
  • 1,554 Answers

Most fuel filters are uni-directional (flow in one direction only).
They have an arrow cast into them to show direction of fuel flow.
Did you install it backwards?

Posted on Nov 20, 2013

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 74 Answers

SOURCE: 1995 honda cbr f3 wont start

I would think about investing in a carb re-build kit.

Posted on Dec 22, 2008

  • 1 Answer

SOURCE: bike won't start 92 yamaha fzr 600

Sounds like the plugs are fouled out, I would pull them and make sure they're about the color of a paper bag. If they're all sooty and wet you most likely have a rich condition. I would take the carbs out and clean everything and pop in a new set of plugs. I have a 87 Fz600 that was acting up until I cleaned the carbs.

Posted on Apr 20, 2009

  • 3037 Answers

SOURCE: Fuel Pump?

I believe that the fuel pump relay is behind the battery. It should be located right near the oil cooler and it should have a watertight connection. I think you might just have corrosion across the terminals which would cause it to start in the middle of the day when it is warm but not when it might be a little damper. What is your climate like? Let me know if you can't find and if you have further questions


Posted on Apr 29, 2009

  • 408 Answers

SOURCE: 1998 suzuki gsxr750 fuel pump inop after replacing filter

You cannot bleed the fuel injection system.Test the pump alone (not on the bike) for sufficient fuel supply.Also check the fuel pump relay.
If all that is ok next time you try to crank the engine (only with kill switch on, the fuel pump primes up) with lifted tank and opened air box, spray a bit of carb cleaner spray towards the throttle bodies.It will help.

Posted on Jun 09, 2009

  • 150 Answers

SOURCE: 1999 road king wont start

Its your fuel pump if you can't hear it. And its inside your tank. Not a hard fix if you have a book that tells you how to remove it. Alot of procedures to follow to get it right. And yes it does work off a relay.

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need colour code for 2011 model kawasaki gtr 1400 (Metallic dark green)

Hi, David for more information about your question and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki Motorcycle Paint ColorRite
Kawasaki 1400GTR Service Manual
OEM Parts for Kawasaki
Kawasaki Concours 14 ABS Owner Manual

Jul 21, 2017 | 2011 kawasaki 1400 GTR

1 Answer

2004 Kawasaki Concours will not run with choke off

Hi, Cecil and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on the blue links below. Good luck and have a wonderful day.
Concours Owners GroupTM Sport touring at its finest SM
having problems with Concours
Kawasaki 1400GTR Service Manual
OEM Parts for Kawasaki
Download Manual 2004 Kawasaki Concours Owner Manual

Jun 15, 2017 | 2008 kawasaki 1400 GTR

1 Answer

What is the best jetting kit for use with after market filters on a gtr 1000 or can I just lift needles up on clips Kawasaki GTR1000 GTR 1000 A1-A2 6 ... > ... > Fuel System > Jets & Jet Kits, Kawasaki GTR1000 GTR 1000 A1-A2 6 Sigma Custom Carburetor Carb Stage 1-7 Jet Kit: Automotive.

Jul 20, 2015 | Motorcycles

2 Answers

#1cylinder not firing on 2003 3010 Kawasaki mule

if its firing ok on other cylinders, unlikely to be pump or fuel filter, focus on electrics, plug, ht lead etc

Dec 08, 2013 | 2003-2007 Kawasaki Kaf620 Mule 3010 4x4...

1 Answer it possible if I replace the original exzos of kawasaki gtr1400 with just using original piping..?

If you mean a piece of straight pipe, then I would suggest that you think again. The exhaust cans are there to do a number of things, The first is to quieten the escaping gasses so that you can hear and so others are not deafened, They are also used to tune the engine The one that comes as standard is set up to get the best power and fuel economy from the engine.

Jun 19, 2013 | 2009 kawasaki 1400 GTR

1 Answer

My cpi gtr 50 won't take in fuel i've cleaned the carb n the fuel but nott'n happens line

Hi, Kaleovidinha always check the fuel flow first to isolate the problem area otherwise the usual suspects are:
1. Fuel tank empty.
2. Fuel cap or fuel tank not venting properly.
3. Fuel filter clogged with rust or dirt.
4. Fuel valve/petcock not in the on or reserve position.
5. Vacuum line to fuel valve cracked, broken, pinched, or missing
6. Fuel valve/petcock clogged or diaphragm cracked, cut or torn
7. Fuel line from the fuel valve to the carburetor or fuel pump clogged, cracked, pinched, bent, broken, or missing.
8. Fuel pump not working
9. Fuel line touching cylinder or head causing fuel to boil and vapor lock, repair by rerouting and wrapping line with convoluted tubing.
10. Carburetor inlet clogged.
11. Carburetor float or needle and seat stuck.
12. Carburetor not venting properly overflow line or bowl fitting clogged, pinched, or bent.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Fuel and Vac Line Tutorial
scooter not getting gas
CPI GTR 50 Service Manual
CPI Scooter Parts Racing Planet USA
CPI GTR 50 2009

Aug 27, 2011 | 2009 Cpi GTR 50

1 Answer

2007 Honda CBR 600 RR fuel pump not priming

Hi, D_justin16 the following is a systematic procedure for diagnosing fuel pump issues designed to keep "DRACHMA" to a minimum. If you need parts check with Amazon and eBay first to keep costs down.
1. If your pump does not turn on check the pump fuse and relay and all wiring including connectors for corroded, broken, or loose pins/sockets.
1. Normal fuel pump pressure is 3-5 PSI.
2. Check any rubber or plastic tubing for age-related pinholes by removing and plugging the ends that connect to the fuel valve and then turn on the ignition switch and watch for fuel streams exiting the pinholes, if any exist, replace tubing as necessary.
3. Check for a clogged a primary fuel filter that comes off the bottom of the pump to screen out big rocks and clean as necessary.
4. Check for a clogged secondary fuel filter that's outside if applicable by removing it from the system and replace it with a short splicing tube turn on the ignition switch and recheck fuel pressure if pressure increases to normal pressure you need a new secondary filter.
5. If all the above check out OK and the pump is not functioning properly then you need a new fuel pump.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Fuel pump not priming
fuel pump not priming CBR Forum Enthusiast forums for Honda CBR Owners
2007 2009 Honda CBR600RR Service Manual Moto Data Project
Honda CB Owners Manuals

Jun 23, 2011 | 2007 Honda CBR 600 RR

1 Answer

When the key is turned on I normaly hear a sound as if the bike is priming or pumping fuel just recently it stopped but the starter will turn but it seems that its not getting fuel

Yes the sound you hear is the fuel pump, check the fuse for the circuit, also does the bike have an alarm or imobiliser fitted, some use the fuel pump circuit to imobilise the bike, check the switch fitted to the stand is not sticking when the stand is up, also check the pump wires inside the connector for corrosion or broken contacts, the fuel pump will only prime when it is taking up the pressure, if it is full you may not get a noticabe noise,

May 17, 2011 | 2003 kawasaki VN 1500 Vulcan Meanstreak

3 Answers

When i try to start my bike up it wont go, just wont fire, checked everything it has spark ect...some days it will go fine, but other days it wont, when i get it going it runs fine, if i turn it off and...

check the air filter if its clean take the carb apart and clean it with something like b-12 or i use wd-40 on my bike so it wont eat the rubber gaskets

Jun 09, 2010 | 1991 kawasaki ZXR 750

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides