Question about 1994 Suzuki VS 1400 Intruder

Open Question

No brake light or blinkers or indicator lights

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know where the fuse is for the driver side brake and blinker light is for the back of the car I bought a brand new bulb and it lights up but when u hit the brake it doesn't work


If the light is on, that's an indication that you have power to the bulb, which probably would not be a fuse issue. Check you brake light switch behind the brake pedal.

Jan 25, 2017 | Cars & Trucks

1 Answer

Brake lights stay on until i use blinker


Blinker overrides the brake lights, so it is probably the brake light switch is defective.

Feb 28, 2015 | 2003 Ford E250

1 Answer

2011 Expedition left rear blinker light not working even after replacing bulb...also, brake bulb does not work with hazards, but does work with brakes and headlights...ideas?


In my experience, when the hazards are on, the brake lights are not supposed to indicate braking in this day and age of automobiles. In other words braking lights will not override the hazards when hazarding. I believe the 3rd or high mount brake light should work when hazarding and braking at the same time to indicate you are braking. I find it very seldom is there the need to drive and have the hazards on....in torrential rain going at low speed perhaps. Anyway, hope this was helpful. If not, I apologize.

Jan 10, 2013 | Ford Expedition Cars & Trucks

1 Answer

2001 ford f150. blinkers want work. brake lights want work. but the light at rear above back glass works when i press the brakes. help


you need first to determine the obvious as most people don't check to see if there brake lights work. make sure the bulbs are not burnt out. if you use the blinkers and the light stays on when you operate them that is usually an indication a light is burnt out.

Aug 16, 2010 | Ford F-150 Cars & Trucks

1 Answer

My 1996 chevy cavalier has no brake lights or blinker lights. I replaced the multifunction switch on the column and the brake stop switch. Still no brake or blinker lights. Third brake light doesn't work...


take a volt meter to the sockets and see if you get any voltage. if you don't, try a continuity test on the socket and see if there are any shorts, blown fuses are good indications of shorts. if you have no voltage and no shorts, you have cut wires somewhere along the lines. i'd say check your relays but if your not getting any voltage at all, it probably won't be relays. check it anyway
hope it helps

Jun 10, 2010 | 1996 Chevrolet Cavalier

3 Answers

Have a Chevy Corsica 1996. Blinkers not working right. When I step on brake the arrow on instrument panel for the right blinker lights up. When use left blinker, both flash like the flashers are on. ...


It sounds like a bad light socket. The brake light and the parking/running/regular part of the socket are shorting out. When you press on the brake petal it's shorting out on the turn signal and sending current to the indicator (arrow) on the dash.. When you use the blinker, it's shorting with the brake light and causing them both to flash...

Check the socket and get back to me with the result.

Mar 14, 2010 | Chevrolet Corsica Cars & Trucks

1 Answer

My bronco has blinkers tail lights and reverse lights. but no brake lights. i have had problems with only one brakelight coming on until i mess with the blinkers. does the brake lights run through the...


yes,they do run through the blinkers,and no you cant bypass it,the blinker switch keeps 1 brake light on continuously while the other is blinking and vice versa,

Feb 20, 2010 | 1987 Ford Bronco

2 Answers

BLINKER ISSUES


Have some one stand in the front of the car and go through the motions for checking all your lights...repeat for the back lights....step on the brakes and place in reverse for the back-up lights....this is usually an indicator that you have a bulb that is faulty or burned out.

Jul 16, 2009 | 1997 Chevrolet Cavalier

2 Answers

1995 GMC Sierra 4x4 - Having tail light problems


Most likely it is a groung issue where your rear wiring harness grounds to the frame. There may also be additional grounds for the wiring harness along the frame before the ground by the rear bumper. One other option is to make sure you have the correct bulbs in. I have seen something pretty similar to that caused by improper bulbs. Make sure your bulbs for the brake light/turn signal have dual filaments as that could be an indication you have the wrong ones; if you have the bulbs I think you do.

Mar 12, 2009 | 1995 GMC Sierra

Not finding what you are looking for?
1994 Suzuki VS 1400 Intruder Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...