Question about Saxon Motorcycles

Open Question

S&S 96ci engine service - Saxon Motorcycles

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is the screaming eagle 254e cams good for the 96ci 2007 with stage one already done??Thanks


Hi, John choosing a set of performance cams is a personal thing do your homework and research for the type of riding you do and what type of improvements you want for, more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Screamin Eagle 254E Cams Harley Davidson Forums
http://www.carlsalter.com/pdfs/Harley_Davidson_Softail%20Models_2007.pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://www.harley-davidson.com/content/h-d/en_US/home/owners/maintain-your-bike/owners-manual.html
Instant Tech Relief To speak with me personally absolutely "FREE"

Feb 25, 2017 | Harley Davidson Motorcycles

1 Answer

What is the oil capacity for the 2009 FLHT 96CI eninge an, Transmission and primary drive


Hi Rmccain186, for more information about your question please visit the websites below. Good luck and have nice day.
Cycles Tech Tips Capacities and Fluid Requirements

May 09, 2010 | 2003 Harley Davidson FLHT Electra Glide...

1 Answer

2005 harley fatboy 96ci, primary housing drain plug stripped out, keeps turning in housing assy?


If you can turn the plug out, you can go to a large size plug. If you can't get the plug to come out, take the outer primary cover off allowing the oil to drain out as you remove the outer cover. Sure it's messy but you've got no choice. Now with the cover off, push down on the plug while trying to turn it out. It'll probably come out doing this. Then measure it and get the next size bigger. Tap the hole to the bigger size and install new plug. Good Luck!

Nov 19, 2009 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

Heat !! 08- 96ci stange 1 reinharts t/d - k&n af - been dyno'd what about an oil cooler?


If it's running way too hot, there is something wrong. Usually timing or air/fuel ratio. Adding an oil cooler will only mask the problem. If it's within normal operating temperature, an oil cooler sure wont hurt, especially if you live in a hot climate.

Oct 13, 2009 | 2008 Harley Davidson FLHX Street Glide

2 Answers

2003 Buick Regal Service Engine Soon light.


The error that I'm showing for error code P1133 is 
P1133 Heated Oxygen Sensor (HO2S) insufficient switching bank 1 sensor 1(Rear Bank).  I would suggest having both of your Oxygen Sensors replaced if you haven't already had that done.  Hope this helps.  Thanks for an honest rating and for using FixYa.

May 19, 2009 | 2003 Buick Regal

1 Answer

Overheatong


. There are issues with excessive heat radiating from the engine, however, especially when riding in prolonged stop and go traffic, but this is mostly on all the 96ci models. The motors are set to run on the lean side in order to pass EPA emissions testing but so far there have been no problems with engine damage as a result. There is a cure in the form of a re-map for the EFI system that will let the bike run a little richer and reduce the amount of heat, but I believe that is only available for the 96ci motors, not the Sportsters.

Nov 20, 2008 | 2006 BMW R 1150 R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saxon Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Saxon Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...