Question about 2013 Honda CRF 250X

1 Answer

2013 Honda CRF 250X replace throttle tube

2013 CRF 250 X How to slack cables to replace throttle tube?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 40,862 Answers

Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Pro Taper Twister Throttle Tube Installation
How to remove throttle tube and put it back on
Honda 2004 CRF250X Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda 2004 CRF250X Owner Manual

Posted on Sep 12, 2017

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: replaced throttle cable on pw50 but can't seem to get it adjusted

If I understand your problem correctly this may help. There should be a spring just a bit smaller diameter than the slide that mounts between the top of the slide and the bottom of the carb cap. No spring means no snap-back. I am assuming there are no kinks in the cable and the cable was routed correctly when installed. Lots of times if the cable is not routed properly the gas tank will "stretch" the cable when the tank is re-mounted. Route the cable properly and the problem goes away..... As far as the slack in the cable, there is a an adjusting screw on the top of the carb (where the cable ends) and an adjuster screw at the hand throttle also where the cable ends. Some bikes have an extra adjuster mid cable but I don't think yours does, (working from memory here). If none of the above work then my guess is that the parts counter handed you the wrong part.

Posted on Mar 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought a brand new 208 honda crf 250x in the fall. only rode it twice before putting it away.. put it in a heated hsowrrom all winter. it always had starting prooblems though.. i ust recently changed...


I am assuming the carb is in good order. Be sure the battery has a good charge and that the spark plug is giving a strong spark. So you have good fuel delivery and good spark, and the air cleaner should be pretty clean. The problem is usually flooding of the engine by twisting the throttle too much, too often. Each twist sends a shot of gas into the chamber. It is pretty easy to flood the engine.

Apr 14, 2011 | 2005 Honda CRF 250 X

1 Answer

My crf 250x starts good and idles but when u give it throttle it boags down and cuts out. what should i do?


When my carburetor was really dirty it did this. Try disassembling and cleaning your carburetor internals, while your at it you should get a kit for it so you can replace the seals etc. Another thing to try is to replace your spark plug and lead. Even if these things don't solve your problem it will make it run allot better. Make sure if you haven't done any of this before to get someone experienced to show you.

Dec 27, 2010 | 2005 Honda CRF 250 X

1 Answer

How do i jet my crf 250x?


pull the carb, remove the main jet, take to a motorcycle shop and ask for the next size up and the one after that. Replace jet and ride, if it feels better try the next one up and so on until you no longer feel a better result, then go back one.

Mar 09, 2010 | 2005 Honda CRF 250 X

1 Answer

Trying to remove the carb. All is ready but the


  • the cables dont come undone from the carb i had an 07 08 honda 250 and i found it was easier to take the throtle apart and leave the cables attached

Mar 05, 2010 | 2005 Honda CRF 250 X

1 Answer

What Oil to Use in My CRF 250X 2004


If you have the owners manual check that, otherwise ring a bike shop and ask them for advice.

Aug 20, 2009 | 2005 Honda CRF 230 F

1 Answer

Rear breaks on my honda crf 250x don't work


when your bleeding the brakes run a tube from the bleeder into a bottle of brake fluid and keep bleeding sometimes it takes a long time. you can also rent a vacum bleeder from your local auto parts dealer and it will be real easy.

May 15, 2009 | 2004 Honda CRF 250 X

1 Answer

Hot start lever siezed in plunger of crf 250 x carburettor


have had the same problem many times. spray carb cleaner into hole where the brass plunger is located give it a little time to let the cleaner work. put some force on the cable it may come out if not remove the cable at the other end so you can remove carb to work on it

Mar 26, 2009 | 2005 Honda CRF 250 X

1 Answer

Change the engine for a brand new one


The dealership should be able to order a new engine but it would be complete with gearbox etc.. It sounds like you must have messed up the crankshaft and top end. Repairing / replacing the top end is ok for the mechanicly inclined to do but crankshaft replacement is best left to an experienced mechanic. If you replace the engine then save the old one for spare parts.

Mar 11, 2009 | 2005 Honda CRF 250 X

Not finding what you are looking for?
2013 Honda CRF 250X Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...