Question about 2010 Generic Trigger SM 50

Open Question

Tyre pressure for generic trigger sm 50cc - 2010 Generic Trigger SM 50

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the manufacturers recommended tyre pressures for a 2005 Pagsta 50cc mini chopper motorcycle


Hi John, tire pressures are stamped on the sidewall. Good luck and have a nice day.

Nov 14, 2015 | Pagsta Motorcycles

1 Answer

Generic trigger 50cc petrol leaking from exhaust port when trying to start?


Hi Nicola, check your compression first if that's ok turn off your fuel valve and try to start the bike, you may have a cracked float or dirt/rust that's keeping the needle from seating allowing excessive fuel to get into the combustion chamber and gas foul the spark plug. If that does not solve your problem then remove the cylinder and piston and inspect for damage and I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
DOWNLOAD Generic Ideo 50cc 2 Stroke Scooter Service

Oct 19, 2015 | Generic Motorcycles

1 Answer

Why does it pull left and right?


Incorrect tyre pressures is my guess. Or you are riding on white lines or cracks which give the impression of pulling left or right.

Sep 16, 2015 | Tao New Scooter 50cc Street Legal New Look

1 Answer

Can i derestrict my exaust on my generric trigger 50 sm


Not a good idea. If you release the back pressure on the exhaust you run the chance of burning the exhaust valve.

Jun 21, 2014 | 2010 Generic Trigger SM 50

1 Answer

How much oil goes into the front forks


Look in your manual. But it won't be more than about 150ml. Sometimes the oil level is checked by centimeters from the top of the fork leg. Not by volume.

Jul 21, 2013 | 2010 Generic Trigger SM 50

1 Answer

I have a 50cc 2002 yamaha zuma. Recently it has started to vibrate excessivly while it is driving. i am still getting top speed and have changed the gas and oil. It starts vibrating at about 20mph.


Hello, try checking the tyre pressures. A low pressure tyre will cause the bike to wobble,especially on the front. Another thing to check is the tyre itself, check for bumps and flat spots. All of these things can cause wobble. One more thing is the front forks, if the oil is low in them, that can also create problems. I hope that helps.

Mar 24, 2011 | Yamaha G5 Motorcycles

1 Answer

I have a orange warning light flasing on my mini cooper 51 plate and i do0nt no wat it is can u help?? the symbol has a (!) on it? there is a button with the exact same symbol under my handbrake


This is the tyre pressure indicator. It shows that one of the tyres is losing pressure through a calve leak or puncture, or can also be triggered after you get new tyres or rotate the tyres.

The method to re-set the tyre pressure warning light is as follows:

Turn the ignition to position 2 (ignition on but motor not started). Press and hold the button under the handbrake until the warning light on the dashboard comes on for several seconds. Start the engine. Drive the car normally for several minutes. This will cause the system to re-set to the current tyres and pressures you have. It will then only turn the warning light on if the pressures change - for example if you get a puncture.

Oct 17, 2009 | 2002 Mini Cooper

Not finding what you are looking for?
2010 Generic Trigger SM 50 Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Generic Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

kakima

Level 3 Expert

102366 Answers

Lawrence Oravetz

Level 3 Expert

9742 Answers

Are you a Generic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...