Question about 2001 Buell Blast

1 Answer

03 buell that wont stay running - 2001 Buell Blast

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Buell Master
  • 40,766 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and free downloads that you will need please visit the websites below and for specific information or questions please feel free to contact me at xlch@mail.com. Good luck and have a nice day.Buell blast 2003 dies out after minute of idle or as soon as give it http://www.buellxb.com/forum/showthread.php?31223-Blast-has-trouble-starting-and-won-t-stay-running-unless-you-throttle-it
Buell Service Manuals PDF Download
TWIN Motorcycles Buell parts
2001 Buell Blast Owners Operators Owner Manual Factory 2001 eBay

Posted on Jan 09, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clicking tapping noise left front lower side


Hi, Anonymous you may have a loose primary chain or a lower end death knock for more information about your issue and free downloads that you will need please visit the websites below, and for specific information or questions, please feel free to contact me at xlch@mail.com. Good luck and have a nice day.

http://www.badweatherbikers.com/buell/messages/20164/150578.html?1444533833

Thread 03 XB9S Knock Rattle in Bottom End

Buell Service Manuals PDF Download

TWIN Motorcycles Buell parts

2001 Buell Blast Owners Operators Owner Manual Factory 2001 eBay

Jan 19, 2014 | Buell Blast Motorcycles

1 Answer

Fuel pump is noisy when engine is running


Hi, Anonymous for more information about your issue and free downloads that you will need please visit the websites below, and for specific information or questions, please feel free to contact me at xlch@mail.com. Good luck and have a nice day.
http://www.buellxb.com/forum/showthread.php?38173-DIY-Fuel-pump-fix-Cheaper-than-replacement-from-HD
03 Buell Firebolt
Buell Service Manuals PDF Download
TWIN Motorcycles Buell parts
2008 Buell Firebolt Owners Manual 99475 08Y eBay

Sep 08, 2013 | 2007 Buell Firebolt XB12R

1 Answer

Can I jumpstart the Buell with a car?


You can jumpstart your Buell using a car, but make sure the car is not running. If the car is running, its alternator can overload the motorcycles charging system.

Mar 23, 2012 | 2002 Buell Blast

1 Answer

Buell blast that turns over but wont stay running


Hi, Anonymous the following applies to carbureted also fuel injected models and the usual suspects are:
1. Severely discharged or damaged battery, 9 volts or lower.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Air/fuel mixture screw improperly adjusted.
10. Water or dirt in the fuel system, carburetor or filter.
11. Restricted, blocked or kinked fuel line.
12. Fuel tank empty.
13. Gas cap is not venting properly or fuel tank venting system blocked.
14. A failed fuel pump, pressure regulator and or fuel injectors.
15. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
16. Needle and seat stuck closed in the float bowl.
For more information about your issue and free downloads that you need please visit the websites below and for specific information or questions, please feel free to contact me at xlch@mail.com. Good luck and have a nice day.
http://www.buellxb.com/forum/showthread.php?31223-Blast-has-trouble-starting-and-won-t-stay-running-unless-you-throttle-it
2008 buel blast wont stay running
Buell Service Manuals PDF Download
TWIN Motorcycles Buell parts
2001 Buell Blast Owners Operators Owner Manual Factory 2001 eBay

Mar 18, 2012 | 2006 Buell Blast

1 Answer

My buell 03 lightning is hard to start it sounds like it needs gas but i checked the pump presure and it goes up to 30 pound i have already changed the injettors tps heat sensor


Did you perform a TPS reset to calibrate the ECM for the new TPS sensor after it was replaced? If not, that may be your issue. The 03's don't have the ability to automatically calibrate the sensor, and the bike will not run correctly until this is done. You will need to either bring it to a dealer, or use a computer and the ECMspy program (free) to do this adjustment.

Sep 16, 2011 | 2003 Buell Lightning XB9S

2 Answers

Fuel pump


Hi, Glenn sorry you can't find the first and best tool you ever bought for your Buell despair not for a mere $10 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below and for specific information or questions, please feel free to contact me at xlch@mail.com. Good luck and have a nice day.
http://www.buellxb.com/forum/showthread.php?29129-How-to-replace-a-fuel-pump-(03-XB9R)
03 Buell Firebolt
Buell Service Manuals PDF Download
TWIN Motorcycles Buell parts

May 06, 2010 | 2007 Buell Firebolt XB9R

1 Answer

Where can I order intake boots for my 03 buell blast?


Here are some talks and purchases on the boots for your blast.

http://badweatherbikers.com/buell/messages/3842/358522.html?1212107501

Dec 26, 2009 | 2003 Buell Blast

3 Answers

Buell Lightning sat for 3 months and now it wont start


add some lucas fuel injector cleaner to the gas in the tank. also i would pull the injectors out and use a spray cleaner on them

Jan 08, 2009 | 2008 Buell Lightning Long XB12Ss

Not finding what you are looking for?
2001 Buell Blast Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buell Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

jmcpoyle

Level 1 Expert

8 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Buell Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...