Question about Motorcycles

Open Question

Server ID AS45237, Server IP 202.117.065.50

Does the code relate to this bank pls

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

O2 sensor bank 1 sensor 2 location 307 1.4 2004


Notes in relation to bank numbers
•Bank 1 always refers to the group of cylinders which includes No.1 cylinder.
•The majority of small engine European vehicles will only have Bank 1 sensors fitted (i.e. 1 x Front & 1 x Rear).
•An inline 6-cylinder engine may have cylinders 1, 2 & 3 referred to as Bank 1 & cylinders 4,5 & 6 referred to as Bank 2.
•V configured engines would normally have Bank 1 & Bank 2 sensors, with again Bank 1 referring to the group of cylinders which contains No. 1 cylinder.
Notes in relation to sensor numbers
•Sensor 1 always refers to the front / regulating (Upstream / Pre-cat / Upper) sensor.
•Sensor 2 always refers to the rear / diagnostic (Downstream / Post-cat / Lower) sensor.
N.B. Some larger capacity vehicles may have 2 rear / diagnostic (Downstream / Post-cat / Lower) sensors on the same bank, which may be referred to by EOBD codes as sensor 2 & sensor 3. Sensor 2 would relate to the rear sensor closest to, or in the catalyst, with sensor 3 relating to the rear sensor furthest from the catalyst.
Notes in relation to position
In some catalogue entries, a sensor will be listed as fitting in left or right position. This is always taken from the point of view of sitting in the vehicle (i.e. For UK RHD vehicles Right = Offside, Left = Nearside).
Correct identification of the relevant oxygen sensor is more important than ever as many vehicles now may have devices such as temperature, pressure and NOx sensors fitted to the exhaust system in addition to the oxygen sensors.

Sep 29, 2016 | Cars & Trucks

1 Answer

4 Codes in computer


code p0128 indicates a mechanical fault ( could be the thermostat stuck open)
code p0174 -system too lean -bank2 ===causes --intake /exhaust leak--fuel pressure/pump--injectors--AIR system--hose connection/s
code po171 refers to system too lean bank 1 same as po174 with the HO2S sensor being the culprit. As to all being related . only by way of the o2 sensors
code p0442 is not connected to the first 3 as it is in a different section of the fuel system

Apr 09, 2014 | 2003 Saturn VUE

1 Answer

Tsb bank swift code


Not a car related problem so i have no idea sorry.Dont do internet banking or anything related dont trust the internet ,old school money under the bed hidden

Mar 09, 2013 | Cars & Trucks

1 Answer

Where should i find this sensor P0342?


EXHAUST RELATED ERROR CODES

There are 711 possible PO generic DTC error codes. Only 7 of the 711 codes are exhaust related.

PO401: Insufficient EGR Flow

PO402: Exhaust Gas Recirculation (EGR) Excessive Flow Detected

PO410: Secondary Air Injection System Malfunction

PO420: Catalyst System Efficiency Below Threshold (Bank 1)

PO421: Warm-Up Catalyst Efficiency Below Threshold (Bank 1)

PO430: Catalyst System Efficiency Below Threshold (Bank 2)

PO431: Warm-Up Catalyst Efficiency Below Threshold (Bank 2)

THINGS TO ASK YOURSELF OR YOUR CUSTOMER

Have there been any driveability or performance issues with the vehicle, have there been any recent repairs or tune-up work performed, if so was the check engine light reset and were the codes recorded on previous repair orders.

Do not rely on scan tool data alone. In most applications, the customer will have the check engine light reset prior to repair. If the original cause of converter failure is intermittent, only the catalyst failure code may show up (masking the original reason for converter failure).

Nov 04, 2012 | Chevrolet Epica Cars & Trucks

1 Answer

What does a po430 code mean on a mercury cougar


EXHAUST RELATED ERROR CODES

There are 711 possible PO generic DTC error codes. Only 7 of the 711 codes are exhaust related.

PO401: Insufficient EGR Flow

PO402: Exhaust Gas Recirculation (EGR) Excessive Flow Detected

PO410: Secondary Air Injection System Malfunction

PO420: Catalyst System Efficiency Below Threshold (Bank 1)

PO421: Warm-Up Catalyst Efficiency Below Threshold (Bank 1)

PO430: Catalyst System Efficiency Below Threshold (Bank 2)

PO431: Warm-Up Catalyst Efficiency Below Threshold (Bank 2)

THINGS TO ASK YOURSELF OR YOUR CUSTOMER

Have there been any driveability or performance issues with the vehicle, have there been any recent repairs or tune-up work performed, if so was the check engine light reset and were the codes recorded on previous repair orders.

Do not rely on scan tool data alone. In most applications, the customer will have the check engine light reset prior to repair. If the original cause of converter failure is intermittent, only the catalyst failure code may show up

Nov 04, 2012 | Cars & Trucks

1 Answer

Codes 1132, 1238, and 1618


All are P codes
1132-This Relates to Heated oxygen sensor (H02S) 1, bank 1/heated oxygen sensor (H02S) 2, bank 1 - signal incompatibility
1238-This Relates to Turbocharger (TC) boost pressure sensor - boost control malfunction
1618-This Relates to Cable fault between AW 50-Q2 TCM and Motronic 4.4 ECM (lamp lights)

Mar 30, 2011 | 2000 Volvo V70

1 Answer

Bmw code 29a8 power management failure and l cant understand the meaning


BMW outputs codes in Hex format. The tool then reads the code and it may translate it to its own format. Some 29A.. code definitions here:

29A0 Lambda Sensor Post Cat Bank 2 Signal
29A1 Lambda Sensor Post Cat Bank 2 Signal
29A2 Lambda Sensor Pre Cat Bank 2 Signal
29A3 Lambda Sensor Pre Cat Bank 2 Signal
29A4 Lambda Sensor Heater Pre Cat Bank 1 Activation
29A5 Lambda Sensor Heater Pre Cat Bank 2 Activation
29A6 Lambda Sensor Pre Cat Bank 1 Signal
29A7 Lambda Sensor Pre Cat Bank 1 Signal
29A8 Power Management Network Failure
29A9 Power Management Battery
29AB Torque Request via CAN
29AE Tank Cap

Code 29A8 i
t's a NETWORK management fault, related with tne main computer. Will need to visit BMW dealer to delete or reset it.

I hope helps with this.

Mar 18, 2011 | 2009 BMW 5 Series

1 Answer

Code 29a8 power management failure, ldont understand the meaning


BMW outputs codes in Hex format. The tool then reads the code and it may translate it to its own format. Some 29A.. code definitions here:

29A0 Lambda Sensor Post Cat Bank 2 Signal
29A1 Lambda Sensor Post Cat Bank 2 Signal
29A2 Lambda Sensor Pre Cat Bank 2 Signal
29A3 Lambda Sensor Pre Cat Bank 2 Signal
29A4 Lambda Sensor Heater Pre Cat Bank 1 Activation
29A5 Lambda Sensor Heater Pre Cat Bank 2 Activation
29A6 Lambda Sensor Pre Cat Bank 1 Signal
29A7 Lambda Sensor Pre Cat Bank 1 Signal
29A8 Power Management Network Failure
29A9 Power Management Battery
29AB Torque Request via CAN
29AE Tank Cap

Code 29A8 i
t's a NETWORK management fault, related with tne main computer. Will need to visit BMW dealer to delete or reset it.

I hope helps with this.

Mar 17, 2011 | 2009 BMW 5 Series

Not finding what you are looking for?

Open Questions:

Motorcycles Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...