At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi, will the display change by pressing the bc button on the end of the indicator lever Hi, will the display change by pressing the bc button on the end of the indicator lever
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes, this could be the shift solenoid. Was the transmission filter changed at the same time as the fluid? Dirt in the system can affect some of the transmission sensors tripping Trouble codes. I cannot be sure what the P1732 code is as some codes can be very vehicle specific but it appears to refer to the transmission or on of it's sensors.
not sure about that one but there is a dimmer wheel by the light switch. move it up and down to dim and brighten the dask lights/cluster. wheel may need replacing. also work the lights on and off switch manually to see if there every thing works smooth or hopes from dim to brite.
Hi Dale. Look under the front bumper either on the left or right trim panel. The trim panels are triangle in shape. An outside temp sensor usually sits in this area. The sensor may be missing. BMW has the sensor, wire, and connector available sperately if they are missing or damaged. It will cause the outside reading to be -40 and can cause the a/c compressor not to operate.
You can switch the temperature mode between Fahrenheit to Centigrade as follows: While pressing the OFF button, press the AUTO button for 3 seconds or more. The display will change from Fahrenheit to Centigrade, or from Centigrade to Fahrenheit.
Friend, you've changed everything but the right thing. The temperature sending unit. It tells the computer to go into cold start mode to start the engine by putting more fuel into the engine. If this sensor is erratic, sometimes don't work, it will cause a hard start situation if not in cold start mode. Dealer cant find this because it's a manual thing and may not be showing up on his tester.
i'm sorry but where is the button you're talkin' about?
Hi, will the display change by pressing the bc button on the end of the indicator lever
×