Question about 1996 Suzuki GSX-R 750 T

Open Question

Clutch lever problem wont desengage gsx-r 750 2004

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Gsx 600 wont start

Does the clutch lever need to be pulled in if it's in gear and you try to start it? Try making SURE it's in neutral before you try to start it.

Also check to see if it has a kickstand lockout switch that might be preventing it from cranking.

Jul 26, 2014 | 1994 Suzuki GSX 600 F (Katana)

1 Answer

Engine keeps rolling over but it wont start. What must i do?

Check the fuel, old fuel can degrade and become useless. Has the bike a fuel tap and has it gone onto reserve. Make sure the engine kill switch is in run position. Remove a spark plug and see if you have a spark by refitting it into the cap and touching the thread to the engine. Please use a thick glove to avoid a shock. Do you have to operate the clutch lever to start the bike my 2005 Suzi SV works this way. If you do have to depress the clutch lever it may be the switch that the lever operates has got sticky or failed.

Apr 08, 2014 | 2004 Suzuki GSX-R 600

1 Answer

I pull the clutch lever and it wont disengage. Before i ave done some work on it, pull out the front sprocket cover and took out the push rod (chain sprocket change), put back the cover in place than the...

Drain the oil and Pull the clutch cover off. That rod connects to the clutch push button. sounds like it fell out. Undo all the little clutch cover bolts. Carefully pull the cover off leaving all the clutch plates in a stack as some are different to others usually the first or last plate .Check the center of this plate as that is where the button usually is. Put it all back together and check clutch with cover off. You should see it move away as you pull the lever. Make sure you back off your clutch first. Hope this helps cheers

Oct 23, 2013 | 2004 Suzuki GSX-R 750

1 Answer

2004 Suzuki GSX-R 750 clutch adjustment

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2004 GSXR Clutch Adjustment Please Help Suzuki GSX Motorcycle Forums...
How To Adjust Clutch Cable 2005 gsxr 600
Suzuki GSX R750 Service Manual
OEM parts for Suzuki

May 17, 2017 | 2004 Suzuki GSX-R 750

1 Answer

How do I adjust my clutch cable on 1996 katana, I just changed it and now it wont engage into gear.

It should be set so that there is about 1/2" play at the lever end before it takes up the clutch mechanism. Make sure the lever isn't bent toward the grip which would restrict it's travel. If the lever is made of aluminum and bent, don't try to straighten it when cold--it will break. Heat the lever with a propane torch until fairly hot, then gently do the straightening. Shift the transmission into first gear, pull the clutch, and try to push the bike to test for release. Don't run the engine until it works as described. If this doesn't work, review the installation of the cable. Hope this helps!

Sep 26, 2010 | 1996 Suzuki GSX 600 F (Katana)

1 Answer

98 gsx600 wont star with the starter but i can push start it is there a kill switch somewhere?

there is a switch on the clutch that will prevent the bike from starting without the clutch pulled in. look for a set of wires that go to the clutch lever, trace them down to a plug in connecter, unplug and on the lever side of the plug put a multi meter set to ohms and pull the lever. you should get a connection. or take a jumper wire and bridge the two wires on the bike side of the connector and try to start. make sure if you do this the bike is in neutral and the clutch is in because it will start in gear.

Sep 11, 2010 | 1999 Suzuki GSX-R 600

1 Answer

How do you change a clutch cable on a 1993 gsx katana 750

Pull the clutch lever and block the actuator arm so that it cannot release (the one on the transmission, not the handlebars).

As you let off the lever, you can fish a small screwdriver in there to get the zinc ball out of the lever. You have to align the adjusters on the lever so that you can remove the cable. The adjusters stay in the lever.

Once you've done that part, just follow the cable back to the clutch actuator arm, and remove the cable and zinc lug through the hole in the arm.

Aug 10, 2010 | 1993 Suzuki GSX 750 F (Katana)

2 Answers

How do i bleed my clutch system?

Fill your res. at the lever, leave the cover off. Don't squeeze the lever. Open the bleed valve down on the clutch till fluid runs out. Tighten it a little and add some fluid as it drains out. Close the bleed valve, refill the res. Barely reopen the bleed valve and let some more fluid seep out. Close the bleed valve and refill the res. Put the cap on, Go.

Jul 15, 2009 | 1990 Suzuki GSX 1100 FK (Katana)

1 Answer

Clutch wont engage after kickstarter shaft installation.

The clutch lever must have been pushed in when i tried to install the push rod the first time so the push rod didn't get pushed in all the way.


May 29, 2009 | 1996 Suzuki GSX-R 750 T

1 Answer

1100 wierd clutch disengage problem

Bleed your slave cylinder on the sprocket cover and refill the hydraulic fluid. If you have any leaks you will get air in the system and it will not fully disengage the clutch. As for the 750, they have cable clutches and you just need to adjust the slack of the cable.

Nov 20, 2008 | 1992 Suzuki GSX 1100 GN

Not finding what you are looking for?
1996 Suzuki GSX-R 750 T Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides