Question about Motorcycles

Open Question

Hungry jacks duke broiler starts beeping randomly Desplay showing "bot gas" Get fixed when press enter button purple of times??

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Emerson microwave, #MW8119SB, push start button to start cooking

Replace the fuse with a ceramic fuse from Home depot! costs less than $3 and it will fix the problem. I had all the same problems as everyone else, you name it my microwave had it! you must remember replace it with a ceramic fuse! not a glass one. I know people say its the switchboard and all that nonsence but I promise you, the fuse plays a majoe roll in the microwave not working properly. Even though it doesnt look broken, a junky fuse can cause your appliance to do very strange things. I replaced mine 6 months ago and it works like its fresh out of the box.

Posted on Apr 29, 2009

  • 105 Answers

SOURCE: Brother Fax 2920 3 beeps when pressing any button

check keyboard for a stuck down key

Posted on Jun 12, 2009

  • 4090 Answers

SOURCE: ''Press Clock'' but can't press buttons, then beeps with F4 error

F4
Open humidity sensor, will occur if humidity sensor is detected as being open continuously over 5 seconds Replace humidity sensor

Posted on Sep 07, 2009

  • 1 Answer

SOURCE: My Galanz microwave WP800AP20-6 is beeping for no reason

I have similar problem

Posted on Jul 27, 2010

bronk50
  • 27725 Answers

SOURCE: system starting to interrupt normal start

the beeps are post during post the very first work is done by the ram,all the memory in the ram is first transferred to the hard disk,and remains active untill turned off.

make sure that your RAM is securely seated

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them they could be faulty

a computer needs its connections to continue its cycle and to have and end to function
obvisously the beeps are windows searching for some hardware it could be RAM cd/dvd hard drive or motherboard all of these must have secure connections for the computer to work
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure make sure the connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error
hope this helps

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Round soft key OXO Timer I need to change the clock time their model # is 1061978


Operating functions:
To set the clock, press and hold the clock/timer button for three seconds. A clock icon will appear on the left side of the screen. Input the time using the numerical buttons and then click the clock/timer button to save the time.
To set the timer, press and release the clock/timer button so that the display shows all zeroes. Enter the desired time using the keypad. Press start/stop to start the countdown. The countdown may be paused by pressing the stop/start button and resumed by pressing the same button again.
When countdown is complete, timer will beep continuously for thirty seconds and display will flash. Timer will then beep every ten seconds for ten minutes until the stop/start button is pressed.
This timer will also time up to time activities. To start count up, press clear/memory so timer reads all zeroes. Press stop/start and a plus sign will appear on the right side of the screen as the timer begins counting up.

Sep 18, 2010 | Microwave Ovens

2 Answers

After changing oil in a 2007 hhr, how do you reset the oil life


Turn Ignition to RUN
Press "Information" and "Reset" buttons at the same time on the DIC to enter personalization menu.
Press " Information" button to scroll through avalable options.
until DIC desplay shows OIL-LIFE RESET
Press and hold "RESET" button ubtill DIC display shows " ACKNOWLEDGED"
This will tell you that the oil life has been reset.
turn key to " LOCK"

Sep 13, 2010 | 2006 Chevrolet HHR

2 Answers

How do i unlock my stove, it is a ceran hotpoint stove. while cleaning it locked and started beeping a flashing F3 . what can i do.


f3 fault code / open oven temperature sensor .) this sensor tell the E O C ( clock ) oven tempts . it will have to be replaced .. ther could be other problems with oven but first things first replace sensor and see how it works .. **** . hop this will help .

Dec 04, 2009 | Ovens

2 Answers

Beeping at random times through the day


You are getting trouble beeps, every time you press status you delay the alarms for 4 hours then they begin again and beep every minute. You need to run a sensor test to find out which sensor has a problem. Open the panel, enter your code and press the test button, it will begin scrolling through the sensors. Activate each sensor until it stops, if one doesnt work it will keep asking you to activaate it. You probably have a dead battery in a sensor.

Jun 23, 2009 | GE Security Simon 3 Wireless Home Security...

1 Answer

KX-T7730


open the system programming(its the phone connected to jack 01) press program button and enter * and # followed by the password(1234), then enter 104, press 'SP-PHONE' then auto/ans button to select, select external music, press store button.

SORRY I FORGOT THE SP-PHONE BUTTON, Dont worry about the display "101" just press # it will change to date and time.

Jul 28, 2008 | Panasonic KX-T7730 Corded Phone

1 Answer

GE Profile Gas Range oven turns off


I just read that the electronic panel malfunctions due to rear burner use. Now, I know that mine gets REALLY HOT in between the back burners (where the heat exhaust for the oven is) whenever I bake/broil. I am guessing that it can cause the same malfunction fromt he oven, as with the backburners. Whenever I use both back burners, mine shows F7 E6, too. Unplugging it for the night or just waiting til the beeping stops and then clearing it works... until I cook again. I read that the replacement part for the control panel is about $300 and another $200, more or less, to install it! I think this is more like a recall or manufacturer's problem. I have read plenty of complaints and I think GE needs to make a call to fix them!!

May 12, 2008 | GE Profile Spectra JGBP79 Gas Kitchen...

2 Answers

Random beeps, oven almost starts itself


The touch pad may be defective. There is a membrane behind the buttons that will cause problems like that. The only cure is to replace the touch assy.

Sep 11, 2007 | GE Profile JKP18 Electric Single Oven

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...