Question about 1990 kawasaki ZZR 1100

1 Answer

I have no power charged battery was ok before now no power check the fuses there ok can you tell me why i have no power please

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

It seems that the battery is not charged or not connected. When you open any door the light inside must turn on. When not, the battery is not charged. Charge the battery and try again.
When the battery goes again out of the power, it indicate that the charging system or alternator are not working properly.
Start your vehicle turn the headlamps on and check the voltage on battery. It must be higher than the voltage when engine is off.
If the voltage with engine on is about 14,5 V charging and alternator are ok. Maybe the battery is dead.
When the voltage with engine on is higher than with engine off but not 14,5 V, there is problem with charging system. When the volage is the same, it can be alternator or charging system.

Posted on Oct 20, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 nissan maxima relays and fuses


Start at the battery. First make sure it has a full charge. Do not proceed until you know the battery is good and fully charged. Use a voltmeter to see if charged, or take it to a parts store for testing-it is a free service, and tells if your battery is good and can hold a charge.
Next thing is to check your battery cables. Are the connections clean and tight, both at the battery and where the other end connects? Make sure no corrosion is on the terminals-that will rob power and may not let the battery charge up or put out power.
After the battery and the cables are checked, now you should get power to the fuse block, do your headlights work now?
Follow the power path-from the battery to the fuse block. Check all your fuses under the e hood, you may have a blown fuse.

Mar 18, 2017 | 1993 Nissan Maxima

1 Answer

Battery wont start the car ,ill charge the battery its ok for a few hours then its dead ,alt charging good ,battery is new,every fuse in both pannels are hot with key off please help


The battery dies after sitting for a few hours ? Parasitic drain on the battery ! With the key off all fuse's shouldn't be hot ! Bad ignition switch . Find a wiring diagram at www.bbbind.com an check power at ignition switch . Look on you tube , a lot of videos on basic electrical trouble shooting .

Nov 13, 2015 | Cars & Trucks

1 Answer

2001 Durango want start. Gage's dead. What's wrong ?


you lost DC power.
battery dead, you didnt say if it cranks fast? does it?
check fuses, if car cranks fast.
if not check battery charge
if dont crank (sure wiggle shifter, sure try neutral starts)
if wont crank do tell of jumper started it cranks ok.
and post back.
what most folks do is call AAA.

Jul 03, 2014 | Cars & Trucks

1 Answer

No electric on ybr 250


Try main and all other fuses. When you say battery OK will it light a 21 watt bulb also check the voltage range = 12.5 to 13.2 V. Remove battery, Please note: - it is very important to remove negative lead first then positive lead.Try charging battery at not more than 1 Amp for a few hours (low charge rate and longer is better than high charge and faster). If in doubt get a battery optimiser dedicated for motorcycles. When you refit the battery connect the positive lead first then the negative.

Apr 01, 2014 | 2011 Yamaha yBR250

1 Answer

I can't get the clock to switch from am to pm


2003 FORD TOURS -SES /OHV -MY WIFE TOOK BATTERY OUT AND LET HER FRIEND BARROW 1T FOR THE WEEKEND THAT I WAS DEER HUNTING ON TUESDAY SHE TELLS ME ALL ABOUT IT AND HOW WHEN SHE WAS PUTTING IT IN SHE DONE BACKWARDS HOW SHE DID THIS I DON'T KNOW NOW BATTERY WILL NOT CHARGE OK GET NEW ALT CHARGE BATTERY SAME THING THIS TIME I GO GET A NEW REBUILD $235.00 SAME-THING NOW I GET A NEW BATTERY $150.00 CHECK FUSSES ALL GOOD YA DONE WRONG OK CAR YOU WIN. ! WEEKEND DEER HUNT HOOD IS UP AND IN A MOCK KILLING OF CAR I LOOK THROUGH SCOPE I SEE A FUSE BOX UNDER THE FUSE BOX . !!! DRUM PLEASE ANSWER IS MAGA FUSE

Dec 10, 2012 | Watches

1 Answer

2003 kawasaki 1500 fi nomad - No battery power to bike. Battery charged, no lights or displays, main fuse and and fuses in fuse box OK.


Ok, locate and check the fuse at the starter solenoide, this is the main power fuse, follow the red battery lead until you locate the solenoide, here you should find under a cover a 30 amp fuse, hope this helps , paul

Feb 27, 2011 | 2003 kawasaki VN 1500 Vulcan Classic...

3 Answers

New battery keeps losing power...


Hi!
There seems that the current is leaking frm somewhere.
Firstly put off all equipment and ignation.
Keep a multimeter in hand.
Remove all the fuses frm the fuse box.
Now..
one by one touch the pin of the multimeter(RED) to one end of fuse solket and the other (Black) pin to the other soket where the fuse sits.
There should be NO reading... keep going from one fuse point to another.... the point wher the multimeter reads while all switches OFF means from tat equiptment the current is leaking... Now check That fuse is for which equiptment e.g. for AC or for blinkers or for headlights etc etc.
Get thet unit checked / repaired / changed as the case may be.

Regards
Berry

Jul 13, 2010 | 1996 Ford Explorer

1 Answer

K7t266 pro2 ver:2 the mother board can't be powered on. Could some one tell me how to check it ok please


When your motherboard/CPU board CMOS battery dry or have charge then you can not run to power *********** board.Or CMOS is disable.Please check

1 Power supply
2 CMOS Battery

Mar 15, 2010 | MSI K7T266 Pro2 (MS 6380-060) Motherboard

1 Answer

No electrical power to anything - even dome light.


Check battery and chassis earth connections are ok.
Check for 12v power at the fuse/power disrtribution fuse bus; - if no power there, trace circuit wiring back to battery.

Jul 12, 2009 | Chevrolet Blazer Cars & Trucks

Not finding what you are looking for?
1990 kawasaki ZZR 1100 Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4742 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...