Question about 2000 Suzuki VS 800 Intruder

Open Question

Draining coolant how to drain and where is the drain plug?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the coolant drain plug


On the bottom of the radiator. There will be a little plastic valve that looks like a butterfly. Spin this to loosen it, and it will let coolant flow out.

Apr 08, 2015 | 2006 Pontiac G6

1 Answer

How to flush coolant on 2004 grand prix


  • Move your badass w-body (a.k.a. Pontiac Grand Prix) to a level area and set the parking brake. Pop the hood and touch the radiator. If it's warm let it cool before you continue.
  • Twist the radiator cap one full turn (Remember to be careful because even when radiators are cool they can still erupt coolant)
  • Place any type of container (bucket [but has to be able to hold 2 gallons]) underneath the radiator and blow the drain plug. (The drain plug on your Grand Prix is on the driver's side bottom of the radiator facing the engine.)
  • Loosen the drain plug and let the old coolant to drain completely. (You may need a wrench to loosen the drain plug)
  • Dispose the old coolant in a sealable container (The coolant is very toxic to people and pets, so you gotta be careful)
  • Shut the radiator drain plug and fill the radiator with water.
  • Run car for a little bit and repeat the process again. (Let car cool, and drain water)
  • Close the drain plug and fill the radiator with fresh coolant until it's about an inch from overflowing. (DO NOT USE ORANGE DEX COOLANT IT IS HARMFUL FOR YOUR HEADGAKETS) You will need 3 gallons of coolant (SE, GT, GT1, GT2, GTP, GTP Comp G.) and 4 for the GXP model. Be sure to check the drain plug for any leakage.
  • Start your car and turn the heating system to high. Allow the car to keep running until the cooling fan turns on twice. After that happens, switch off the engine and check the coolant level. If it went down, add more coolant. If not, put the radiator cap back on and close the hood.

Feb 20, 2014 | Cars & Trucks

1 Answer

A diagram of the flushing of a radiator and block of a chevrolet blazer LS 2000


Theres no such thing as a diagram, here are the draining instructions, hope this helps...
  • 1-Place a large drain pan beneath the radiator drain plug. The drain plug is located on the passenger side at the very bottom of the radiator on the engine side.

  • 2-Make sure the engine is cool. Open the hood of the truck and remove the radiator cap.
  • 3-Loosen the drain plug. On the 2000 Blazer, the drain plug is a wing-nut type of plug. Twist it with your fingers until the coolant begins to drain.

  • *To flush the block, once you have drained the radiator, run the engine for a bit untill the temp gauge goes up to normal, then the coolant will have been evacuated from the block. DO NOT leave the engine on, once it reaches normal temp, (this will happen quick) turn off right away, otherwise you'll be forking out a few hundred $$$ to fix the worped heads.
    4-Tighten the drain plug with your fingers once the coolant has drained fully from the radiator. Remove the drain pan and dispose of the used coolant properly.
    Some service stations will take and recycle your used coolant.
    Hope this helps...



  • Read more: How to Drain a Radiator From a 2000 Chevy Blazer ' eHow.com http://www.ehow.com/how_6357264_drain-radiator-2000-chevy-blazer.html#ixzz1VS4RBufX

    Aug 19, 2011 | 2000 Chevrolet Blazer

    2 Answers

    Where is the engine drain plug?


    It is always on the lower side of the oil pan on the "bulge".

    Aug 17, 2011 | 2004 Honda Accord

    2 Answers

    How to drain radiator


    hello. on the drivers side of radiator is a drain. here is a picture and the instructions for draining the coolant out.



  • Install a tube on the radiator drain. Place the end of the tube in the drain pan.
  • After the engine cools down, remove the radiator cap.
  • Completely open the radiator drain ****.
  • Allow the coolant to drain from the system until the flow stops.
  • Place a drain pan under the block drain hole plug.
  • Remove the drain hole plug from the engine block.
  • Allow the coolant to drain from the block until the flow stops. There may be more drainage from the radiator at this time.
  • Install the block drain hole plug.
  • Close the radiator drain ****.


  • 1ab38d9.gif

    Jul 04, 2010 | 1997 GMC Suburban

    3 Answers

    Where is the drain plug for the radiator


    Should be a drain **** at the bottom of the radiator that unscrews out. It looks like a wing nut has been welded to a bolt on the end of it. Another way to do this is just pull off the bottom hose.

    Mar 31, 2010 | 2001 Jeep Cherokee

    3 Answers

    Where is the engine coolant drain bolt on a 2003 2azfe camry? i found the radiator drain but can't find the engine drain plug-a photo would be great


    The textbook method is to remove the drain plug on the bottom of the radiator.

    Most drain plug is make of inexpensive nylon/plastic and it may fall apart while you turn it.

    The professional method is to loosen the lower radiator clamp and drop to lower radiator hose.

    Drain the coolant onto a large drain pan and recycle the coolant

    ===

    I just did a FREE write up on air purge from coolant system and how to detect initial state of blown head gasket at the Fixya tip selection.

    Click HERE

    or follow link below.

    http://www.fixya.com/cars/r3582329-how_to_inspectdiagnose_and_repair_minor_

    Nov 17, 2009 | 2003 Toyota Camry

    2 Answers

    How do you drain the radiator and the coolant tank and add new coolant?


    The textbook method is to remove the drain plug on the bottom of the radiator.

    Most drain plug ismake of inexpensive nylon/plastic and it may fall apart while you turn it.

    The professional method is to loosen the lower radiator clamp and drop to lower radiator hose.

    Drain the coolant onto a large drain pan and recycle the coolant

    ===

    I just did a FREE write up on air purge from coolant system and how todetect initial state of blown head gasket at the Fixya tip selection.

    Click HERE

    or follow link below.

    http://www.fixya.com/cars/r3582329-how_to_inspectdiagnose_and_repair_minor_

    Nov 15, 2009 | 2002 Saturn L-Series

    1 Answer

    96 Taurus; coolant leaks from radiator drain


    the drain plug will have seals on it, just replace the drain plug. any parts store will have a drain plug/seal

    Oct 19, 2009 | 1995 Ford Taurus

    3 Answers

    Cannot find coolant drain plug


    It is located at bottom of radiator, you will need 1/2 inch square drive or a 3/16 inch hex drive to open drain valve. Usually on pass. side at bottom end of radiator.

    Jul 15, 2009 | 1999 Oldsmobile Cutlass

    Not finding what you are looking for?
    2000 Suzuki VS 800 Intruder Logo

    Related Topics:

    21 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    78257 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4727 Answers

    Richard
    Richard

    Level 2 Expert

    83 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...