Question about Yamaha Motorcycles
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service/owners/ manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Error Code List
Yamaha Fault Codes motorcycle manuals
Yamaha Wr125 Service Manual
OEM parts for Yamaha
YAMAHA WR125R Owner Manual
Posted on Dec 17, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Engine oil
They take just under 1ltr of oil. you can check the level is correct by running the engine till its warm and pulling out the dipstick located near the head stock on the frame. If the level is low then add more oil, be careful not to overfill as the later model WR's expel excess oil into the air box, this can make a mess of your air filter.
Posted on Nov 13, 2008
The flashes are what is called a 'blink code' - in your case indicating Error No. 34
Error 34 is the ECV (exhaust control value) POT voltage.
Check is the 6-pin black connector to the EGCA (the valve actuator).
Hope this helps.
Posted on Jun 13, 2009
SOURCE: yamaha tw 125
The noise you hear is valve clatter. You should not adjust your timing chain. Instead get a manual and find the vlave clearances for that bike. (Ex. The exaughst valve may be .006" and the intake valve may be .004") Then you'll need a feeler gauge, and to do this you'll remove the valve covers and get the engine to TDC (Top Dead Center) This is where the piston is at the very top of it's stroke and both valves are shut. (compression stroke) You must then loosen the rocker arm nut to the point that you can insert the feeler gauge between the rocker arm and the top of the valve run the nut down tight to the feeler gauge and then pull gauge out and repeat on the other valve.
Posted on Aug 24, 2009
You don't decode it. It is only a production run series number. Mororcycles are like cars in that respect. It is the frame number, AKA the "VIN number", is what carries all the information. Call a dealer with the frame number and he can tell you year, paint color, specific model and more. They may have a problem if the bike is too old. Yamaha changed to a newer code system a few years back.
Can I get a “very helpful” rating on this answer?
Posted on Aug 28, 2009
SOURCE: 2005 WR 125 I need the manual
None of the manuals actually fit your description, but one of them could be a good guide for you:
Posted on Jan 21, 2010
Testimonial: "How great was that! Thanks for the tip re my Husky 125!"
Tips for a great answer:
Feb 14, 2017 | 2008 Yamaha Vino 125
Nov 27, 2016 | Yamaha Motorcycles
Jul 21, 2016 | 2008 Yamaha YZF-R15
Mar 04, 2014 | Yamaha YZF-R125 Motorcycles
Oct 19, 2013 | Yamaha Motorcycles
Oct 19, 2013 | Yamaha Motorcycles
Dec 30, 2012 | Midland Radio Midland WR 120 - Weather...
Dec 29, 2012 | 2001 Yamaha Drag Star Four
Dec 11, 2010 | 2010 Yamaha Cygnus X
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: