Question about 1996 Honda CBR 900 RR Fireblade

1 Answer

There is no power going to the controlls when I turn the key to the on position, as a result the bike will not start ether. I have looked at the fuses on the left side of the bike and all of the are fine.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 103 Answers

Did you have lights, horn, etc? If not measure the battery voltage. It should have no less than 12.8 V. The bike was unused a long period of time or the malfunction occured suddenly?

Posted on Oct 21, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3567 Answers

SOURCE: bike will not start no power

Touch a 12" piece of wire to one terminal then touch the other end of the wire to the other terminal. Got a really good spark? No spark = bad battery. Okay, so you do get a good spark. Check the wiring harness for an unplugged wire. Also check for loose connections and burned wires. Bad ignition switch? Kill switch turned on?

Posted on Mar 13, 2009

netrakid250
  • 52 Answers

SOURCE: With Key switch in on position I have no power to ignition

Check for any shorts other than that it should be fine cant think of any thing else

Posted on Jun 01, 2009

  • 161 Answers

SOURCE: Hi, headlights turn off when power on and bike wont start.

You may be pinching a wire..

Posted on Sep 26, 2009

bazzz7071
  • 338 Answers

SOURCE: While riding my '95 F3 she shut off on me. Im

double check the main fuse could be a hairline break in the element, or you have a solder connection at the main switch hot wire.

Posted on May 20, 2010

  • 1 Answer

SOURCE: When I turn ignition key on all lights come on

The head light sometimes go on when ignition is turned on. sometimes it doesn't. if i hit the horn button sometimes the headlight will go on. any solutions?

Posted on Jul 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 Honda shadow 750cc won't start


Ok, been awhile since I played with a Honda, but I believe in the KISS method.
#1 go buy a cheap $10 meter at harbor freight, Menards, Home Depot, Lowes, etc, etc. You can't just look at a fuse and say it's good, been there done that...LOL
#2 There used to be a fuse in the headlight bucket, check to see.
#3 real simple, did you leave your KILL switch off??? If not the check voltage to kill switch, make sure you have power coming out.
#4 check the ignition wire for the starter, when key is in on position or (start) position, make sure you have voltage. If you have power, follow it to your starter leads and kill switch.
#5 check voltage at your coils, Check for voltage coming out of coils. Just because you may or may not have spark, doesn't mean you have enough to start bike.

When you hooked in the LED's you either shorted wires to blow a fuse, over loaded a wire and possibly burned it in 2. Or you dislodged a connection someplace. Go back over everything you did again, and go buy a meter.

May 22, 2017 | Honda Motorcycles

1 Answer

Starts but wont run after ignition switch is returned to the run position from the start position.


The problem is that when you have the switch in the START position, you are getting power to the ignition system, but not when in the RUN position. Most likely causes are a bad ignition switch, a faulty aftermarket alarm system [if it has one] or a bad ballest resistor wire going to the ignition coil's + terminal. You need to break out your test light and start checking to see where the fault lies.

Jul 14, 2014 | 1981 Ford F 150

1 Answer

No power to bike


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have nice a day.
Bike wont turn over Tried recharging battery and then new one too Clicking...
Bike will not start Please help me out ducati org forum the home for.
DOWNLOAD 1978 Ducati 900 Sd Darmah
Ducati OEM Parts Fiche Lookup and Online Ordering
Ducati Maintenance

Feb 21, 2014 | 1978 Ducati 900 SD Darmah

1 Answer

No power ignition when turn key


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r6-forum.com/forums/46-general-discussions/165925-r6-wont-turn-over.html
http://www.r6messagenet.com/forums/welcome-center/161248-please-help-bike-wont-start-turn-over.html
2008 2009 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

May 02, 2013 | Yamaha YZF-R6 Motorcycles

2 Answers

1995 honda odyssey starts and then dies


Isince it cranks, means you have power, elctric system is ok! I guess.. this could be a result of gas delivery problem... either a pump or gas circuit controller.... OR a small propable reason if you have an immobilizer (electronic chip on key!)... but there should be the securit key highlithed on dashboard...

Sep 01, 2012 | 1995 Honda Odyssey

1 Answer

1993 yamaha fzr 600,started bike and went down road,bike lost power and still no power,battery has power but no power when i turn key on


Hi, Russell and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
no power to my ignition when turn the key
FZR Won Start The FZR Forum
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
OEM parts for Yamaha
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf

Aug 31, 2012 | 1993 Yamaha FZR 600

1 Answer

Troubleshooting for laverda motorcycles


Did your bike quit whilst it was running, or is the problem that it won't turn over on the starter when you try to start it?Position 1 of the ignition switch should allow the starter to be operated and the engine to fire up. Position 2 is for parking lights only. The ignition switch can suffer poor internal contacts with age. It may have been replaced with the wrong type of switch if you say it turns over in position 2. Have you checked the fuses? If they are OK, try bypassing the ignition switch completely.If you are running the original ignition, the control box under the tank can fail. Check that there is a spark on all three plugs. THEY ALL MUST BE KEPT EARTHED when turning the engine over to avoid destroying the ignition module.

Apr 10, 2012 | 1974 Laverda 1000 3C

1 Answer

Yamaha wont start


Hi Denver, and the usual suspects are:
1. Ignition switch not in the "ON" position.
2. Engine run switch in the "OFF" position.
3. Discharged battery, loose, corroded or broken battery cables, especially the "NEGATIVE" cable at both ends (solenoid chatters).
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Security alarm needs a reset.
6. Starter control circuit, relay, or solenoid faulty.
7. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
1997 Yamaha Motorcycle Service Repair Manuals

Dec 20, 2011 | 1997 Yamaha YZF Thunder ace 1000 R

1 Answer

1999 800vs replaced battery when key is turned on to start bike all lights on speedometer light up should be just green neutral.bike just clicks will not turnover


Actually when the key is turned on all the "dash" lights come on neutral, oil, temp and what ever else as soon as the bike starts the lights will go out. If the lights come on while the engine is running then you have a problem or it's in neutral "green".

For the bike not starting a few things, first off the battery even though you say it's new may have been sitting on the shelf for a while and they do loose power so it may need charging. The newer bikes the headlight light comes on when the key is turned on which robs the starting system of power to turn the starter, the batteries need to be good on these bikes or it's just not going to work. If the headlight comes on and looks yellow or amber then there isn't enough power in the battery. If it's a nice bright white light then there is power and the starter may need to be serviced.

If the bike has been sitting over the winter I'd guess the battery has just lost power and requires charging.

Cheers be safe and have fun with your motorcycle

Apr 10, 2011 | 1999 Suzuki VS 800 Intruder

1 Answer

93 HD Sportster 1200 will not start!


Have you tried to bypass the starter button/switch? Use a heavy jumper wire to go between the starter terminal and the positive battery terminal. Turn the key to "On" position, make sure "Run/Off" switch is turn on. Make sure bike is in neutral. I've started guys bikes with coat hangers before when they lost had trouble with the starter button. If the bike starter turns over, you'll at least have a place to start looking for the issue. Also you said you checked the battery, what was the voltage?

Jun 02, 2010 | 2001 Harley Davidson XL Sportster 883...

Not finding what you are looking for?
1996 Honda CBR 900 RR Fireblade Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...