Question about kawasaki Motorcycles

Open Question

2002 vulcan 1500 classic Fi won't start on cold mornings. Starts fine after day warms up?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

sivaranjini
  • 241 Answers

SOURCE: how to change oil on a 2002 Kawasaki Vulcan

It makes a great desktop image.
2002-kawasaki-vulcan1500classicfia-small.jpg
2002 Kawasaki Vulcan 1500 Classic Fi
2002-kawasaki-vulcan1500classicfib-small.jpg
2002 Kawasaki Vulcan 1500 Classic Fi

• 2002 Kawasaki Vulcan 1500 Classic Fi
.
What immediately distinguishes the Kawasaki Vulcan™ 1500 Classic Fi cruiser from the rest of the well-populated class is that it has the look, feel and sound of a mid-1950s motorcycle. But Kawasaki matches the "look" with a digitally controlled fuel-injection system and high-tech features that result in modern performance. Indeed, response to the Vulcan 1500 Classic Fi was so positive that upon its introduction, Motorcycle Tour & Cruiser magazine dubbed the bike "Cruiser of the Year."
The big 90 cubic-inch V-twin engine in the Classic Fi pumps out plenty of torque and power with high-compression pistons and cam timing taken from the original Vulcan 1500. A Mitsubishi digital fuel-injection system feeds each cylinder a high-octane fuel mixture through twin 36mm throttle bodies. A separate intake tract for each throttle body provides smooth engine operation. The tip of each injector contains four nozzles, with two of those aimed at each intake valve.
Two different systems automatically and accurately control the amount of fuel injected into the cylinders. A 16-bit electronic control unit (ECU) uses readings from sensors that monitor engine coolant temperature, intake air temperature, atmospheric pressure, intake air pressure and throttle position to adjust the amount of fuel injected. The overall result is excellent engine response and power with increased fuel efficiency. The ECU also has a special pin that allows technicians to check the fuel-injection system if needed.
There are four valves per cylinder actuated by single overhead cams. Two valve springs are used on all valves to help ensure tight valve closure, while hydraulic valve lash adjusters automatically maintain valve clearance for smooth engine performance, reduced noise and no maintenance. Automatic cam chain tensioners keep cam timing accurate and provide greater reliability with no upkeep. The right-side crankcase and clutch cover are designed to make it easy to check the engine’s oil level and to perform regularly scheduled maintenance.
The engine produces 85 foot-pounds of torque at 2,500 rpm so that a crack of the throttle punches out smooth acceleration. A gear-driven engine counterbalancer and rubber engine mounts reduce handlebar and floorboard vibration, yet the engine retains its distinctive V-twin rumble.
A long, low-slung chassis provides the classic cruiser look. The Classic Fi’s floorboards are positioned to put the rider in an upright and comfortable position. Also, the brake pedal is designed to make it easier to apply the dual-piston-caliper-equipped brake. Other conveniences include wide, five-way adjustable brake and clutch levers for added rider comfort and self-canceling turn signals for easier use.
An electronic speedometer eliminates the traditional wheel-driven mechanism and its speedometer cable for a cleaner look. The speedometer face atop the five-gallon gas tank features an LED display for the odometer and tripmeter, as well as a clock.
Because customizing is integral to the whole cruiser experience, Kawasaki offers a full line of FIRE & STEEL™ accessories for the Classic Fi. Among the choices are numerous chrome pieces, leather bags and trim, backrests, lights, racks and windshields.
With its exceptional performance, nostalgic looks and high-tech enhancements, the Vulcan 1500 Classic Fi is just the ticket for the high-minded cruiser enthusiast.




Kawasaki Vulcan® Cruisers

By introducing the KZ900 LTD in 1976, Kawasaki was an early metric leader in what has become today’s cruiser movement. When the Vulcan® 750 cruiser debuted 10 years later, it was Kawasaki’s first V-twin-powered cruiser and featured high-tech items such as liquid cooling, double overhead cams, shaft drive, dual disc front brakes and mag wheels. In 1995, Kawasaki unveiled the Vulcan™ 800, one of the industry’s first V-twin metric cruisers to feature modern cruiser styling.
For 2002, the Kawasaki cruiser lineup is 10 models strong and ranges from the entry-level Eliminator® 125 to the brand-new Vulcan 1500 Mean Streak. The venerable Vulcan 500 LTD, Vulcan 750 and Vulcan 800 models retain the stylish characteristics that have made them popular, and are now available in new hues.
Also available this year are the Vulcan Classic and Drifter™ models. The Classics include the 800, 1500 and 1500 Fi, and provide a choice in both displacement and technological advancement without sacrificing style. Similarly, the Drifter 800 and Drifter 1500 provide a stylish retro appearance, but in both the mid- and heavyweight-cruiser genres.
In addition to the bikes, a key element to the cruiser lifestyle is customizing the motorcycle to fit individual design tastes and performance needs. Fortunately, Kawasaki offers its own extensive line of genuine Fire & Steel™ accessories. Motorcyclists can choose from literally hundreds of parts to customize their Kawasaki Vulcan motorcycles, and in doing so, make their own bold statement. Customers can find Fire & Steel accessories at their local Kawasaki dealer or shop online at buykawasaki.com.

Posted on Jun 22, 2009

  • 434 Answers

SOURCE: How to set timing.

There are two timing marks on the crank. One is for the front cyclinder and the other is for the rear. When you line the front cylinder mark, the front cam has two horizontal lines that line up across the top of the head. Look at the cam lobes and make sure the exhaust lobes will be the next valves to open. Turn the crank and do the same for the rear cylinder. Make sur you remove the cam chain tensioners first and leave any slack in the chain on the tensioner side when installing them around the cams.

Posted on Jul 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove front right turn signal so I can install a new on a 2002 Vulcan 1500 Classic fi


Hi Zack, I am sorry you can't find the first and best tool you ever bought for your Kawasaki but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/2002+kawasaki+vn+1500+vulcan

Jul 29, 2015 | 2002 kawasaki VN 1500 Vulcan Classic

1 Answer

2001 Kawasaki 1500 Classic radiator cap location


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Coolant change Vulcan 1500 Classic FI
How to replace motorcycle coolant
Kawasaki VN1500 Service Manual
OEM parts for Yamaha
2001 Kawasaki Vulcan 1500 Classic Fi Owner Manual

Jun 10, 2015 | 2001 kawasaki VN 1500 Vulcan Classic

1 Answer

My 2003 chevy tahoe won't start in the morning


Many possible causes....Too little info to make an intelligent suggestion. Try charging the problem vehicle's battery with jumper cables for 2 minutes with the supply vehicle running at fast idle (or about 1500-2000 RPM, if it is tachometer equipped) before you try to crank the problem vehicle on a cold morning. If it starts right up, you likely have a weak battery that needs replacing.

Feb 13, 2012 | 2003 Chevrolet Tahoe

2 Answers

Need radator for kawasaki vn 1500 classic tourer 2001 is the driffter the same radator as the vn 1500 classic plz hellllllllllllp


TO ALL VN1500 OWNERS....This once happen to me,
I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds..
Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars,
When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.

Feb 06, 2012 | kawasaki VN 1500 Vulcan Classic Tourer Fi...

1 Answer

2002 Kawasaki VN 1500 Vulcan dies when put into gear


Hi, Kdompe357 and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Vulcan 800 Classic Stalls When Shifting Into 1st
Stalls when putting into gear first time
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki Intruder VL1500B Owner Manual

Jun 24, 2017 | 2002 kawasaki VN 1500 Vulcan Meanstreak

1 Answer

What kind of oil is used in a vulcan classic 1500 2002


Use any oil that is JASO MA certified motorcycle oil. 10w-40 for cold climate. 20w-50 for warm climate/touring. Car oils use different additives and may cause scoring in certain types of cam bearings. Do not use any oil that says " Energy Conserving " on the label . It will shorten the life of your wet clutch and transmission gears. If you choose Synthetic oils, they will help your bike run cooler and shift easier.

Sep 15, 2010 | 2002 kawasaki VN 1500 Vulcan Classic

1 Answer

How to change oil on a 2002 Kawasaki Vulcan Classic 1500


It makes a great desktop image.
2002-kawasaki-vulcan1500classicfia-small.jpg
2002 Kawasaki Vulcan 1500 Classic Fi
2002-kawasaki-vulcan1500classicfib-small.jpg
2002 Kawasaki Vulcan 1500 Classic Fi

• 2002 Kawasaki Vulcan 1500 Classic Fi
.
What immediately distinguishes the Kawasaki Vulcan™ 1500 Classic Fi cruiser from the rest of the well-populated class is that it has the look, feel and sound of a mid-1950s motorcycle. But Kawasaki matches the "look" with a digitally controlled fuel-injection system and high-tech features that result in modern performance. Indeed, response to the Vulcan 1500 Classic Fi was so positive that upon its introduction, Motorcycle Tour & Cruiser magazine dubbed the bike "Cruiser of the Year."
The big 90 cubic-inch V-twin engine in the Classic Fi pumps out plenty of torque and power with high-compression pistons and cam timing taken from the original Vulcan 1500. A Mitsubishi digital fuel-injection system feeds each cylinder a high-octane fuel mixture through twin 36mm throttle bodies. A separate intake tract for each throttle body provides smooth engine operation. The tip of each injector contains four nozzles, with two of those aimed at each intake valve.
Two different systems automatically and accurately control the amount of fuel injected into the cylinders. A 16-bit electronic control unit (ECU) uses readings from sensors that monitor engine coolant temperature, intake air temperature, atmospheric pressure, intake air pressure and throttle position to adjust the amount of fuel injected. The overall result is excellent engine response and power with increased fuel efficiency. The ECU also has a special pin that allows technicians to check the fuel-injection system if needed.
There are four valves per cylinder actuated by single overhead cams. Two valve springs are used on all valves to help ensure tight valve closure, while hydraulic valve lash adjusters automatically maintain valve clearance for smooth engine performance, reduced noise and no maintenance. Automatic cam chain tensioners keep cam timing accurate and provide greater reliability with no upkeep. The right-side crankcase and clutch cover are designed to make it easy to check the engine’s oil level and to perform regularly scheduled maintenance.
The engine produces 85 foot-pounds of torque at 2,500 rpm so that a crack of the throttle punches out smooth acceleration. A gear-driven engine counterbalancer and rubber engine mounts reduce handlebar and floorboard vibration, yet the engine retains its distinctive V-twin rumble.
A long, low-slung chassis provides the classic cruiser look. The Classic Fi’s floorboards are positioned to put the rider in an upright and comfortable position. Also, the brake pedal is designed to make it easier to apply the dual-piston-caliper-equipped brake. Other conveniences include wide, five-way adjustable brake and clutch levers for added rider comfort and self-canceling turn signals for easier use.
An electronic speedometer eliminates the traditional wheel-driven mechanism and its speedometer cable for a cleaner look. The speedometer face atop the five-gallon gas tank features an LED display for the odometer and tripmeter, as well as a clock.
Because customizing is integral to the whole cruiser experience, Kawasaki offers a full line of FIRE & STEEL™ accessories for the Classic Fi. Among the choices are numerous chrome pieces, leather bags and trim, backrests, lights, racks and windshields.
With its exceptional performance, nostalgic looks and high-tech enhancements, the Vulcan 1500 Classic Fi is just the ticket for the high-minded cruiser enthusiast.




Kawasaki Vulcan® Cruisers

By introducing the KZ900 LTD in 1976, Kawasaki was an early metric leader in what has become today’s cruiser movement. When the Vulcan® 750 cruiser debuted 10 years later, it was Kawasaki’s first V-twin-powered cruiser and featured high-tech items such as liquid cooling, double overhead cams, shaft drive, dual disc front brakes and mag wheels. In 1995, Kawasaki unveiled the Vulcan™ 800, one of the industry’s first V-twin metric cruisers to feature modern cruiser styling.
For 2002, the Kawasaki cruiser lineup is 10 models strong and ranges from the entry-level Eliminator® 125 to the brand-new Vulcan 1500 Mean Streak. The venerable Vulcan 500 LTD, Vulcan 750 and Vulcan 800 models retain the stylish characteristics that have made them popular, and are now available in new hues.
Also available this year are the Vulcan Classic and Drifter™ models. The Classics include the 800, 1500 and 1500 Fi, and provide a choice in both displacement and technological advancement without sacrificing style. Similarly, the Drifter 800 and Drifter 1500 provide a stylish retro appearance, but in both the mid- and heavyweight-cruiser genres.
In addition to the bikes, a key element to the cruiser lifestyle is customizing the motorcycle to fit individual design tastes and performance needs. Fortunately, Kawasaki offers its own extensive line of genuine Fire & Steel™ accessories. Motorcyclists can choose from literally hundreds of parts to customize their Kawasaki Vulcan motorcycles, and in doing so, make their own bold statement. Customers can find Fire & Steel accessories at their local Kawasaki dealer or shop online at buykawasaki.com.

Jun 22, 2009 | 2002 kawasaki VN 1500 Vulcan Classic

1 Answer

Just went to start after winter blowing gas out the air cleaner.


sounds like the needle and seat is not sealing.It is a common problem when bics are stored over winter.Either remove carb and clean nedle and seat or replace to be sure.

Mar 15, 2009 | 2000 kawasaki VN 1500 Vulcan Classic...

1 Answer

Clutch slipping while cold, when warm/hot, it operates great.


I have a 2000 Vulcan Nomad FI & had a very similar problem. In fact, it's a very common problem with these bikes. I fixed it by replacing the Clutch Spring. (As Described here: http://www.gadgetjq.com/clutch_spring_replacement.htm

It cost me $40 and 3 hours of time with an impact wrench.

Jan 23, 2009 | 2004 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...