Question about Motorcycles

Open Question

Where is the fuse for the fuel pump relay on 87 535 virago?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

shaggyrat
  • 1224 Answers

SOURCE: E.E.C fuse keeps blowing in 1991 Ford Explorer

if you replaced fuel pump i would look at backward wiring when replaced and i would start at the source of work if your vehicle was working fine before replacement then 9 out of 10 it will be your fuel pump wireing

sometimes when putting wireing back together the connectors have the missing clip and in turn you can turn the wireing in both directions now where positive is touching the ground on both sides of connector kris kross problem check your work this is crucial use a test light to find the right wires where they go

Posted on May 26, 2008

  • 88 Answers

SOURCE: 99 volvo s80 fuel pump getting no current. Fuse OK but can not find relay between fuse and pump

ther are good few types of fuse box for this car.but if it has 6 relays along the bottom its relay number 28hope this helps

Posted on Oct 27, 2008

mrgreenz
  • 962 Answers

SOURCE: fuel pump relay or fuse

In most cars it is located at the fuse box or relay fusebox inside the engine compartment or near the fuel pump itself. It could aslo be the fuel pressure regulator if the fuel pump is good.

Posted on Jan 21, 2009

localwonder
  • 6784 Answers

SOURCE: no power at fuel pump chev.S-10 looking for fuel pump relay and fuse

The fuel pump relay is located Under hood, driver side, upper firewall, mounted in relay block.

The fuse is located under the instrument panel to the left of the steering column. The fuse block should be visible from underneath the steering column, near the pedal bracket. If the panel is not visible, check for a removable compartment door or trim panel which may be used on later models to hide the block.



Posted on Jun 03, 2009

  • 1 Answer

SOURCE: fuel pump relay

its in the trunk on the passanger side of the back seat

Posted on Jul 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is fuel pump fuse and relay on 2004 chevy classic


In the under hood fuse / relay box . Fuse #48 15amp F/P - INJR , Relay # 18 fuel pump . GM Fuel Pump Relay Testing

Jan 07, 2016 | 2004 Chevrolet Chevrolet Classic Base

1 Answer

05 Chevy cobalt have no power to fuse block for fuel pump


You have no voltage at 15 amp fuel pump fuse in the under hood fuse/relay center ? There is a fuel pump relay also in same under hood fuse box. The fuel pump fuse gets power from the fuel pump relay. The ( PCM ) engine computer controls that relay, gives power or ground electronically to turn the relay on giving power to the fuel pump through the fuel pump fuse. You could have a bad relay or an anti-theft system problem . What engine does you vehicle have 2.0 L or 2.2 L the 2.0 L engine gets power differently to fuel pump .

Dec 28, 2014 | 2005 Chevrolet Cobalt

2 Answers

Where is the fuel pump fuse


Probably a relay, not a fuse. If there is a fuse it will be marked on the fuse box panel. Usually the relay is located under the hood either in a fuse/relay box or on a rack of several relay on the firewall.

Jun 12, 2014 | 2003 Nissan Murano

1 Answer

Bike turns over but will not start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2, TPS, ETP, IAC,or BAS).
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box if applicable.
17. Tilt sensor needs a reset.
18. Security system not disarming alarm needs a reset.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Help 93 Yahama Virago Starting problem BAR Bay Area Riders Forum
https://yamahaclub.com/forums/topic/36814-help-virago-535-problem
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13-16_110.pdf

Oct 02, 2013 | 1997 Yamaha XV 535 Virago DX

1 Answer

Fuel system parts for 1991 535 virago under tank fuel pump


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Amazon com CNT Fuel Pump for Yamaha XV535 Virago 1988 2003 Fuel Pump...
How to test fuel pump Yamaha Virago 535
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13-16_110.pdf

Jan 28, 2013 | 1991 Yamaha XV 535 Virago DX

1 Answer

1993 virago, fuel pump won't run in bike or on bench. Fuel relay does kick in. Anyone know of cheap replacement pump that I can rig?


Hi, Lester for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Amazon com CNT Fuel Pump for Yamaha XV535 Virago 1988 2003 Fuel Pump...
How to test fuel pump Yamaha Virago 535
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13-16_110.pdf

Sep 19, 2012 | 1993 Yamaha XV 535 Virago DX

1 Answer

Cant get my 1987 yamaha virago to start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2, TPS, ETP, IAC,or BAS).
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box if applicable.
17. Tilt sensor needs a reset.
18. Security system not disarming alarm needs a reset.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
https://yamahaclub.com/forums/topic/36814-help-virago-535-problem
Motorcycle Message Board Motorcycle USA
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2005/LIT-11626-18-21_1000.pdf

Mar 31, 2012 | 1988 Yamaha XV 535 Virago DX

1 Answer

1995 Yamaha Virago 535 will not turn over?


Check that the relays you have removed only operate the flashers and fuel pump. Neither of these should stop the engine from turning over.

Mar 13, 2012 | 1995 Yamaha XV 535 Virago DX

1 Answer

How many fuel pumps and relays are on a '90 volvo 740 GL


  • You have two fuel pumps. A main fuel pump and an in tank fuel pump and one fuel injection/pump relay that turns the fuel on for the both of them at the same time and each fuel pump has a dedicated fuse.
  • So your vehicle has 1- relay, 2 pumps, 2 fuel pump fuses [1 for each pump ]
  • The relay and both fuses are located under the drivers side of the dash in a little fuse/relay panel.

  • Hope this helps and thank you for using FixYa

Regards, Tony

Jul 23, 2011 | 1990 Volvo 740

4 Answers

Faulty fuel pump on my virago 535


A low Universal Pump can be used! It must not exceed 3.0 PSI! I have used the ones from NAPA that are a 2.5 PSI Low Universal Fuel Pump! It will fill the float bowls up and then stop pumping. Your float needles have to be Good and working properly and float level set right at factory Specs. Any pump over 3.0 PSI will NOT Work as they will overfille the carbs and flood engine. Good float needles and seats can hold up to 3.25 PSI Fuel Pressure but anything over that will push them open and overfill the float bowl chambers which will flood the engine cylinders with Way To much Fuel! Hope that helps! Rick

Mar 22, 2009 | 1997 Yamaha XV 535 Virago DX

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...