This bike keeps flooding out and won't hold a idle below 3000rpm. the vaccum controled fuel-valve had a blown diaphram, I rebuilt this, but it still seems to be feeding way to much gas to the engine. with the valve turned to reserve it seems to run better but still seems to run very rich,am I looking at a carb. prblem or should I look for something else ?
To start with it sounds as though your floats heights are out. Also you may need new neeedle & seats because they could be leaking fuel. One of the best things you can do is get a workshop manual for this bike. It will give you setting for you carbies, eg. float heights, mixture screw settings, & also problem solving solutions.I hope this a help to you.
Regrades Lighten.
I had same problem and did what you did ,with same results. so i bypassed the petcock with an open / shut valve and it's never ran smoother . good luck steve [email protected]
1,255 views
Usually answered in minutes!
×