Question about Suzuki Motorcycles
I clean the carburator because i had the bike put away almost a year so i decide to clen them out i put everything back the bike started and died after 15 second and i went to start it and nothing there id s no sparks , but there is one thing weird when i turn the switch on the needle from tempature moves al the way up. what is causing that a short because i took of the cdi and it keep doing it
I RECON YOU HAVE A SHORT CHECK ALL WIRING YOU MIGHT HAVE PINCHED IT REPLACING THE CARB
Posted on Oct 19, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: honda cbr 600 wont start
hi, each lead has the specific number on it. if you do this correctly then they genrally give you an idea to where the sit in the coils( the way they bend :-) ) also i believe the coils are better off been attached to the frame once you are sure leads are in corect order and possitioned correctly in the coils.i just presumed the coils neaded earthing. make sure battery is pleny charged as a bad battery can just hinder. it is also very easy to flood the bike so just check the plugs again. if they are unusually wet then dry them off and try again . otherwise maybe try cleaning all electics.
hope this somehow helped
Posted on Apr 26, 2009
1 maybe there is a diaghfram tear at your carb only 1 is funtioning and 1 block engine is running but under power
2.check your fuel line from tank to fuel filter then pump then carb
probally there is a debrie stuck in the pipe line or in your tank
Posted on May 11, 2009
SOURCE: 79 gs550 - uh ohs in wiring...
When you reassembled the bike did you pinch any of the wiring harnesses? Trace the wiring through the bike and make sure everything has a solid connection between their respective power sources and activation switches. Alot of time bikes run wiring under the gas tanks so you need to make sure that you didnt cut anything when pputting it back on (if you removed the tank)
Posted on Jun 15, 2009
Either that or the relay that connects the positive lead to the starter is shorted. If you can get into the relay, you may be able to hold the contacts open if the switch is shorted or the contacts may have welded themselves together
Posted on Jul 15, 2009
Tips for a great answer:
Jul 11, 2015 | 2005 Yamaha XVS 1100 Dragstar
Jan 18, 2014 | Motorcycles
Mar 11, 2012 | 1989 Honda GL 1500 Gold Wing
Apr 19, 2011 | 2008 Suzuki Boulevard
Jun 23, 2010 | 1971 Laverda 750 S
Oct 10, 2009 | 1995 kawasaki ZZR 1100
Jun 15, 2009 | 1979 Suzuki Gs 550 L
Apr 27, 2009 | 2005 Suzuki DR-Z 125 L
Nov 22, 2008 | 1985 Yamaha FZ 750 FT (U.S.)
Jun 07, 2015 | Suzuki VL 125 Intruder LC Motorcycles
53 people viewed this question
Usually answered in minutes!