Question about Motorcycles

Open Question

2005 yamaha r1 wiring diagram

I have yamaha r1 2005. My problem sometime when i start engine, my headlight can on and sometime cannot on. But, when i try hi beam switch, headlight okay.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
DickCanFixIt
  • 948 Answers

SOURCE: 2005 model yamaha r1 motorcycle

It sounds like you have a poor ground connection. You'll have to disassemble and check the wiring harness for broken wires, start up near the ignition switch or around anything that is no longer stock on the bike (like aftermarket turn signals, fuel nanny, power commander, etc.)

Posted on Dec 29, 2008

Ad
  • 2 Answers

SOURCE: high beam blows fuse

If I recall, they have a problem with wires chaffing under the fairing. Good luck the fairing has to come off.

Posted on Apr 20, 2009

Benimur
  • 6966 Answers

SOURCE: Wiring solutions for 2004 Yamaha R1

Hi and welcome to FixYa,

Have you tried the yellow/black wire?

Good luck and thank you for asking FixYa.

Posted on Aug 15, 2009

  • 314 Answers

SOURCE: sidestand and neutral light problem for 2005 yamaha R1

Try checking the wiring for snags or earthing out and test the side stand unit off the bike with a conductivity meter ..also try an oil change .

Posted on Mar 13, 2010

  • 113 Answers

SOURCE: I have a 2005 Yamaha

Hi,
check your headlight relay for loose connections or a bad wire from the relay to the headlight.
Turn off the ignition and if you have a multimeter set it to Ohms and check the wiring for continuity from from the relay to the headlight.
It could also be a bad wire from the handlebar switch to the relay.

You could reverse the two wires at the relay that are feeding your headlight. Obviously the high and low beams will be switched on in reverse, but if the high beam comes on in low beam setting then the headlight and wiring are OK but the high beam contact in the relay is no good, (in which case you would replace the relay) or the handlebar switch or the wiring from it to the relay are bad.
Ask more questions if you want.

Cheers, Steve
PS Feel free to vote for my answer or give a testimonial if I have helped.

Posted on Oct 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my Yamaha r1 big bang head light high beam dont work checked fuses under seat nothing wrong there so were must i look please help


Hi, Anonymous if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
headlights not working
http://www.r6messagenet.com/forums/r6-maintenance-technical/123412-headlight-not-working-bulbs-fuse-good.html
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 20, 2014 | 2005 Yamaha YZF-R1

1 Answer

Headlights dont work


Beings it did seem to work intermittently ("sometimes they would work") tells me there is a loose wire, or loose electrical connection somewhere along the wire run.

Apr 09, 2014 | 2005 Yamaha YZF-R1

1 Answer

R1 headlight wiring diagram


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals
Yamaha R1 Performance upgrade 1
Yamaha YZF R1 02 03

Mar 24, 2013 | 2002 Yamaha YZF-R1

1 Answer

Wiring diagram 2005 yamaha yzf r1


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.auto-wiring-diagram.com/wp-content/uploads/2011/06/complete-electrical-wiring-diagram-of-yamaha-yzf-r1.jpg
http://www.r1-forum.com/forums/105-07-08-r1-mechanical-help/250798-need-wiring-diagram.html
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jun 14, 2012 | 2005 Yamaha YZF-R1

1 Answer

I have a 2005 R1 and the dash lights and headlights will not come on when bike is started, marker lights, turn signals all work, dash lights up when u turn key but goes off when started. Fuse or loose...


Hi, Tom for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/105-07-08-r1-mechanical-help/262996-headlights-instrument-lights-not-working.html
06 R1 headlights and instrument light went out
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jun 01, 2012 | 2005 Yamaha YZF-R1

1 Answer

Wiring diagram 2004 r1


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
R1 wiring diagram
http://www.auto-wiring-diagram.com/1503-complete-electrical-wiring-diagram-of-yamaha-yzf-r1.html
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

May 06, 2012 | 2004 Yamaha YZF-R1

1 Answer

I have a 2005 yamaha yzf r1 and my headlights, brake light, and turn signals do not turn on bike runs and everything are the fuses burnt out?


Hi, Tom if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r1-forum.com/forums/105-07-08-r1-mechanical-help/262996-headlights-instrument-lights-not-working.html
Turn Signals Not Working Please Help
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 24, 2012 | 2005 Yamaha YZF-R1

1 Answer

I have a 2005 yamaha yzf r1 and it says the brights are on but the headlights won't come on. I have checked the fuse and changed the bulbs and they still won't work.


Hi, Tom if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
04 R1 Headlight Problem
http://www.r6messagenet.com/forums/r6-maintenance-technical/123412-headlight-not-working-bulbs-fuse-good.html
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jul 15, 2011 | 2005 Yamaha YZF-R1

1 Answer

04 yamaha r1 headlights not working but highbeam indicators on


Hi, Tom if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
2004 r1 headlights not working Yamaha R1 Forum YZF R1 Forums
http://pnwriders.com/threads/05-r1-headlights-wont-come-on.164551
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Mar 08, 2010 | 2004 Yamaha YZF-R1

3 Answers

2005 model yamaha r1 motorcycle


It sounds like you have a poor ground connection. You'll have to disassemble and check the wiring harness for broken wires, start up near the ignition switch or around anything that is no longer stock on the bike (like aftermarket turn signals, fuel nanny, power commander, etc.)

Dec 29, 2008 | 2005 Yamaha YZF-R1

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...