Question about Suzuki GSX-R 750 Motorcycles

1 Answer

Clutch problem? i REPALCEPLACED ALL FLUIDSNOW WHEN I TAKE OFF ON THE BIKE IF FEELS LIKE THE CLUTCH WILL NOT ENGAGE FULLY. THE BIKE MOVES, BUT THE RPMS ARE HIGH AND i'M NOT GOING ANYWHERE. 91 gixxer 1100

Posted by on

  • tombones May 11, 2010

    Did you use transmission fluid or motor oil in the gearbox?

  • Yevgeniy May 11, 2010

    changing fluids will have no effect on the clutch operation. what fluids did you change? did you make any other adjustments - such as clutch lever free play?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Ya used the wrong oil in the gear box, the clutch is slipping, to fix thhis it could be as easy as proper oil replacement in the gearbox or as bad as new clutches, the oil you use in a bike is VERY important as some cause clutches to slip and others to grab depending on the weight.

Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 golf clutch pedal went to the floor. Car would not engage any gear. Fixed cable so pedal now feels good but still won't engage I can move gear lever any where, release pedal but nothing happens.


What do you mean when you say you fixed the cable. It sounds like the cable broke and you replaced it. Is that correct. If so, did you adjust the free play in the clutch pedal to the manufacturers specification. If you have not done this correctly the clutch will either not disengage, or no engage properly. From your description it appears as though there is n free play and hence the clutch is staying disengaged even when you release the clutch pedal. If this is the case, then try lengthening the cable until the clutch pedal moves with say 25 mm of free movement before anything happens, and try again.

May 19, 2016 | Cars & Trucks

1 Answer

REPLACED CLUTCH ON ZR 550 CLUTCH ENGAGES , BUT WHEN FULLY RELEASED BIKE JUDDERS THEN STALLS OUT . TRY TO ADJUST & GEARS WONT ENGAGE .


So if you raise the revs to say about 4000 rpm and let the clutch out does it stall or judder or both will it engage at all and pull away ?

Mar 07, 2015 | Motorcycles

1 Answer

Hello I have replaced the clutch plates,the release cylinder seals and rebuilt the clutch master cylinder. There is no leaks and the system has been bled and it feels fine. When I pull the clutch lever in...


Back wheels often move when the lever is pulled in...this is due to hydraulic drag caused by the oil on the clutch plates and is totally normal. You should be able to stop the wheel by hand with the lever in.
With the lever out the clutch is fully engaged and the engine will therefore stall with the brake on...
As long as the wheel rotation can be stopped by hand with the clutch pulled in it's behaving normally...
Rocking the bike in gear is a method that's used to seperate the plates on a clutch that is dragging...usually if it's not been used for a while.

May 06, 2012 | 1987 Yamaha FZR 1000

1 Answer

Started bike, pulled clutch lever, put bike in 1st gear, let out on clutch and nothing happened. clutch lever moves freely with no tension at all. when i put the kickstand down it shuts off like its...


The clutch lever should have some tension, so could be a problem with the hydraulic actuator stuck, or a failure of the clutch. try bleeding the clutch, or pull the clutch cover off and see if the pressure plate moves

Apr 22, 2010 | Yamaha YZF-R1 Motorcycles

1 Answer

CCM 604e 2001..how to correctly adjust clutch cable, clutch drags


Turn the clutch adjustment bolt towards the clutch-lever surface all the way in-not too tight. Feel the lever pressure as crisp, engage the first gear, and see if the bike moves when you engage; stops when you dis-engage. Give the adjustment-bolt a couple outward turns, and see. Repeat procedure as necessary.

Nov 10, 2009 | 2001 CCM 604 DS Supermoto

2 Answers

1987 kx125 clutch wont engage


push rod bent ? too short ?

Aug 06, 2009 | 2003 kawasaki KX 125

1 Answer

My dirtbike only moves when the clutch is fully dinengaged...


is there any free play with the clutch lever? only need about a quarter inch of free play.. if there is none, it will burn out the clutch plates.

May 18, 2009 | 2003 Suzuki DR-Z 125

1 Answer

Clutch not fully disengaging


You have either air in your hydraulics which you need to bleed or else the clutch plates are worn/warped....here is the repair manual....
rate me if I've helped you. Thanks.
http://www.carlsalter.com/download.asp?fileid=075084077095049050053045050048048046040083088046077067088046069067088041095050048048049046112100102

Apr 03, 2009 | 2003 KTM SX 125

1 Answer

Un usual rpm spikes


At a guess.... Your clutch is slipping. Higher gears and increased drag at hiway speeds put the most torque through the clutch and it sounds like that's when the plates start to slip. When you back off the plates grab again until the load over powers the plates again. But that's just a inter-guess through a computer screen...... ,,

Nov 10, 2008 | 2008 HM CRE F450XI

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

440 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...