Question about Tomos Sprint Motorcycles

Open Question

Clutch is slipping on my 2007 Tomos Sprint w/kickstart Where can I get a clutch?

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: golf mk4 slipping clutch


Posted on Oct 11, 2008

  • 409 Answers

SOURCE: Slipping Clutch

If you have a clutch cable thenyou can adjust it. If it's a hydraulic system you need a new clutch.

Posted on Dec 31, 2008

  • 36 Answers

SOURCE: 1995 vn1500a9 clutch slips

if the bleeding temporarily helps you may have a bad master or slave cylinder, check the system really good for leaks. also check that your hose isnt pinched or cracked.

Posted on Jan 29, 2009

  • 286 Answers

SOURCE: Clutch Sometimes Slipping in 4th and 5th gears!

Hi Jackiaria

Unfortunately you have a hydraulic clutch, which is self adjusting on your car.

The problem you are experiencing is the excessive wear to your clutch, or oil contamination on the clutch plate.

Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected.
There is also a possibility of excessive wear, or scoring, on the flywheel surface, the longer you drive the vehicle with a slipping clutch, possibly requiring the flywheel to be skimmed.

Shop around for a best price, and a trustworthy garage !

Good Luck !

A FixYa rating would be Nice....Thanks.....John.

Posted on Feb 17, 2009

  • 3567 Answers

SOURCE: my bike has seized but the piston is fine and

You say the bike seized up but the piston is okay. Did the engine seize up or did it lock up? I need to clear up some terminology. A piston will seize up due to lack of oil. It basically welds to the cylinder wall. When the piston cools the metal contracts and often will be able to move once again. Assuming the kick start and piston seem to be operating normally, if you pull in the clutch lever, will the bike roll when pushed? If it will not roll, then the gearbox is locked up. Get back to me by posting a comment with what you find and I will be glad to help identify the cause and the fix needed.

Posted on Apr 06, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2006 Toyota hiace diesel van clutch slipping. Are brake and clutch fluid the same? Cheers

Yes they are the same . Check that the master cylinder is operational as a slipping clutch can be a blocked compensating port not allowing the fluid to drain back to the reservoir and holding the pressure on the clutch release.

Oct 06, 2014 | 2007 Toyota Hi-Ace 220

1 Answer

2007 Kia Sportage clutch slips in high gear

If engine revs increase but road speed does not increase, your clutch is coming to the end of its life and needs to be replaced

Jun 06, 2014 | 2007 Kia Sportage 2.0

1 Answer

My 50cc yamaha wont start electronically or with kickstart...battery is charged lights working

Hi, Eric your starter motor is not/was not the problem that dubious title goes to the starter drive/Bendix/clutch which is a separate component that is activated by the starter motor it is a mechanical gear driven part that engages the clutch pack to turn over the engine. It has an internal mechanism that allows the gear to turn in one direction and once the engine starts allows the drive gear to free spin. If gear free spins in both directions then the drive gear has failed, it is not serviceable and needs to be replaced. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Starter slipping on 05 RX1 and possible cheap fix
Starter Clutch Removal avi
OEM parts for Yamaha
Yamaha XC50Z Owner Manual

Feb 13, 2013 | 2007 Yamaha C3

1 Answer

I am having shifting trouble on my 1995 tomos targa a35 motorcycle it takes a long time before it shifts and it shifts very hard when it dose

I am an actual Tomos mechanic, and all of you guys are a bunch of shadetree troglodyte mechanics who think that mopeds are the same thing as motorcycles because you have never actually worked on one.

A Tomos does not have "shift forks" "neutral" or "clutch cable" and the transmission is not built into the crankcase.

A tomos has a 2 speed auto that is a separate unit from the motor itself. it shifts between 1st and second via a centrifugal clutch, so if your having a hard time shifting then you either need new clutch springs and or shim/replace the clutch stones. should only take an hour if you know what you are doing.

Aug 28, 2011 | Tomos Arrow Motorcycles

1 Answer

2003 Yamaha Ag 200 clutch slipping

Hi, Anonymous and the usual suspects are:
1. Clutch controls improperly adjusted.
2. Insufficient clutch spring tension.
3. Friction discs or steel discs are worn or warped
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
AG200 Central everything about the Yamaha AG200 motorcycle
Clutch Service Don Slip Cyclepedia
DOWNLOAD Yamaha AG200 AG 200 Service Repair Workshop Manual Download...
OEM parts for Yamaha

Jun 02, 2011 | 2007 Yamaha AG 200 E

1 Answer

I replaced the friction plates and clutches on my 2002 gsxr 1000 because the clutch was slipping and after i replaced everything i found out that my clutch still slips

Are you sure you've placed the plates the right side in? Has your clutch grip, "dead" route before becomes tight when you grab it?

Sep 06, 2010 | 2007 Suzuki GSX-R 750

1 Answer

Iveco daily transmission, seems to slip like clutch slip , but is auto trans. also smells like clutch slip. Barry R

thats because it is clutch slip ,auto boxes have a clutch in them ,the front clutch ,also check the oil level

May 02, 2010 | 2007 Fiat X1/9

1 Answer

2007 screamin' eagle v-rod sometimes slips out of first gear.

This does not sound like clutch to me more than likely wor selector

Apr 12, 2010 | 1993 Harley Davidson XLH Sportster 883

1 Answer

How to remove the clutch from my kdx 200

The simple way to do it is borrow an electric impact gun. (1/2" drive) If you jam something in there you can damage things.

Jul 28, 2009 | 1998 kawasaki KDX 200

2 Answers

I cant kick start my moped the engine seems locked up

its the central google clutch, theres two springs either side and one of these springs must have seized meaning that the clutch can not open up and close, it will always be in gear, i know its a rev and go and you dont have gears but you do, you have a nuetrual and a go when the springs are shut its in nuetral when there open they go, if they are open because of the seized spring the ped is in gear there for you canot turn the engine over by kick starting it. hope i helped :D
and im only 14 :P

May 16, 2009 | 2005 Tomos Se 125 F

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomos Experts


Level 1 Expert

13 Answers

Joseph Gallucci

Level 2 Expert

120 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

43124 Answers

Are you a Tomos Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides