Question about 2007 Maico 250 Enduro

Open Question

Would i get a new motoplat for a 250 maico 1981

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2336 Answers

SOURCE: maico 250

at the time was non runner but set the points and off she wentonly prob now is the person before me must have had barrel off and not put nuts on proper..i was driving it and top end came loose..looks like will have to get reboredpiston and ring are ok but they will have to be changed when get rebored.what i need the now of you guys is help to find out the year of it etc so i can get parts i need.It's a 1975 MC250/5. The chassis number is probably the same as the engine number, without the M. ,,,

Posted on Nov 10, 2008

Ad
  • 2336 Answers

SOURCE: 1979 Maico 250 Enduro Wiring

with Steering lock on headstock and correct tank using the plug in black connector Bosch ignition - she looks great and pulls like a train.... My problem is that I am entered into an Enduro in France (I am in England) on the 14th October and the bike must have working lights.....It has a headlight and Tail light but no wiring connecting them. There are several spare wires taped up under the tank I am quite happy to carry out the wiring I just need to know the colours to use...and how to check them I have a multimeter available. It has a horn attached and I have bought a high/low /horn switch , as well as a rear brake light switch...,I have written this motoplat instruction quite a while back: http://www.ktm495.mxbikes.com/motoplat.htm Right at the bottom is the color coding for the lightning wires.,,,

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to troubleshoot a motoplat mini 6 ignition for a 495 KTM dirtbike


Hi im guessing your year to be 1981 or 1982.First if you have not done so make sure your coil is grounded.Next disconnect your kill switch.Next check the primary side of the coil .3 to .5 ohms check the secondary side of the coil 5k to 7k ohms with out the spark plug cap.While your at it check for spark with out the cap.Make sure your kicking it fast as motoplats do not spark below 700 rpm.If all else fails you have a few choices .Vance smith can rebuild yours for under 200.00 usally.You can go with a pvl ignition for around 500.00.Also make sure your crank bearings are tight and your mag side crank seal is not leaking if you smell fuel in the mag cover you need to replace your crank seal good luck

Jul 10, 2015 | KTM Motorcycles

3 Answers

I need schematics for a 1981 csr 250 Kawasaki...


clymer or haynes book--try library sec629 others *** manuals are similar-sayonara

Jun 11, 2010 | 1981 kawasaki Z 250 C

1 Answer

1997 Maico 250 motocross- need a manual for a remake. Motor has no spark.


Love maicos. Check the easy stuff first. Make sure the kill button isn`t grounded,check the plug cap(they go bad often)then check connections. Then you need to check coil resistance and ground if that`s ok the stator needs to be checked

Mar 14, 2010 | Maico 250 Cross Motorcycles

3 Answers

Yamaha xt 250 with no spark


hi did you sort it as my 1981 yamaha xs 250 twin is not sparking but i dont now why

Sep 26, 2009 | 1981 Yamaha XS 400

1 Answer

Husqvarna wr 430 ignition timing motoplat


http://www.yourhusky.com/files/5._Husqvarna_Electrical_&_Ignition_System.pdf

Jul 18, 2009 | 1989 Husqvarna CR 430

1 Answer

1979 Maico 250 Enduro Wiring


with Steering lock on headstock and correct tank using the plug in black connector Bosch ignition - she looks great and pulls like a train.... My problem is that I am entered into an Enduro in France (I am in England) on the 14th October and the bike must have working lights.....It has a headlight and Tail light but no wiring connecting them. There are several spare wires taped up under the tank I am quite happy to carry out the wiring I just need to know the colours to use...and how to check them I have a multimeter available. It has a horn attached and I have bought a high/low /horn switch , as well as a rear brake light switch...,I have written this motoplat instruction quite a while back: http://www.ktm495.mxbikes.com/motoplat.htm Right at the bottom is the color coding for the lightning wires.,,,

Nov 10, 2008 | 2007 Maico 250 Enduro

1 Answer

Maico 250


at the time was non runner but set the points and off she wentonly prob now is the person before me must have had barrel off and not put nuts on proper..i was driving it and top end came loose..looks like will have to get reboredpiston and ring are ok but they will have to be changed when get rebored.what i need the now of you guys is help to find out the year of it etc so i can get parts i need.It's a 1975 MC250/5. The chassis number is probably the same as the engine number, without the M. ,,,

Nov 10, 2008 | 2007 Maico 250 Cross

Not finding what you are looking for?
2007 Maico 250 Enduro Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maico Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Maico Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...