Question about 2008 kawasaki KLX 450R

Open Question

Oil capacity how much oil to put in after oil drained and new filter in

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a fuel filter on a polo vivo 2010


Engine oil: Drain or extract and replenish; renew oil filter Engine oil: Drain or extract engine oil ? Chapter. Renewing oil filter ? Chapter. Replenishing engine oil ? Chapter. Draining or extracting engine oil Special tools and workshop equipment required t Used oil collection and extraction unit -V.A.G 1782- t Oil spill cloth -VAS 6204/1- Draining or extracting engine oil Carry out the following procedure: > Note
t For engines with standing oil filter the oil filter must be renewed before changing the engine oil. When removing the filter element a valve is opened, the oil in the filter housing automatically flows into crankcase. t If the engine oil is drained and not extracted with an oil extractor, replace drain plug. This prevents leaks. t Observe disposal regulations! - Extract engine oil using used oil collection and extraction unit -V.A.G 1782-. or - Remove oil drain plug. - Let engine oil drain. > Note
t The oil drain plug is fitted with a secure seal, therefore the oil drain plug must always be renewed. t Observe disposal regulations! - Screw in new oil drain plug with seal hand-tight. - Replenish engine oil, specification ? Chapter. Engine oil capacity: "Power unit" ? Power unit; Rep. Gr.17"Lubrication; oil capacities" or ? Maintenance table. Specified torques for oil drain plug: t Petrol and diesel engines 30 Nm > WARNING
t Torque specifications must not be exceeded. t Excess torque can cause leaks in the area of the oil drain plug or even damage. Renewing oil filter Renewing oil filter, 1.4 l and 1.6 l injection engines > Note
t Prevent engine oil from dripping onto components in engine compartment. t Oil new O-rings before installing. t Observe disposal regulations! Renewing oil filter, 1.4 land 1.6 l engine Carry out the following procedure: alt="W00-10211"> - Unscrew cover cap -1- with socket insert 36 mm AF and remove cover with oil filter insert -4- and valve -5-. - Renew O-ring -2- of cover cap and O-ring -3- of valve. - Renew used oil filter element with new filter element. > Note
Observe disposal regulations! - Tighten cover cap -1-. Cover cap torque setting: 25 Nm. Replenishing engine oil Oil specifications ? Chapter Engine oil capacities: "Power unit" ? Power unit; Rep. Gr.17"Lubrication; oil capacities" or ? Maintenance table. General notes > Note
Observe disposal regulations! - After replenishing with oil, wait at least 3 minutes and then check oil level. - Pull out dipstick, wipe with a clean cloth and push dipstick in again to limit stop. - Pull dipstick out again and read oil level. alt="N01-10183"> For dipstick as illustrated: A - Oil must not be replenished. B - Oil may be replenished. It may happen that the oil level afterwards is in the -A- region. C - Oil must be replenished. It is sufficient if the oil level is in the -B- region (hatched area) afterwards. There is a danger of damaging the catalytic converter if the oil level is above the -A- marking. - If oil level is below -C- marking, top-up oil to -A- marking. alt="N01-10255">
25567142-tnzdbwhiaswbtdy3r1p2vgzs-2-2.png

Mar 14, 2015 | Volkswagen Polo Cars & Trucks

1 Answer

What is the engine oil capacity for a 1996 Freightliner FL70?


Should be 6 quarts with a new filter. Best way to do it though is 2 drain the old oil, remove & replace the oil filter, put in 4 or 5 quarts, turn over the engine 2 get new oil in the new filter & then check the level on the oil dipstick and add more oil until it shows full.

Aug 30, 2014 | Cars & Trucks

2 Answers

How do i change the oil in my 1994 buick park ave


first you will check your owners manual for the required specification of what weight ( 10w30) oil to use and then the fill capacity.( 5.quarts ) also the auto parts store will tell you those as well. I always buy one extra quart. Once you have oil and filter, warm car up for 3-5 minutes, (this will help oil drain faster and easier) once car is warm shut of motor,block rear wheels jack the front of car up enough to slide under it. BLOCK car or support with jack stands.put a drain pan under car, remove the oil drain plug on the bottom or side of the oil pan.( make sure your catch pan will hold at least 6-7 quarts of fluid. once oil has stopped draining replace drain plug, now remove the oil filter, unscrew counterclockwise, lube new oil filter seal with oil, screw on to oil housing clockwise rotation, hand tighten. fill motor with oil to recommended fill capacity.start car , check for leaks around filter, if no leaks shut car off and lower car to ground, check oil on dipstick and wipe off,insert and check again,fill to fill line on dipstik and your done.

Jan 14, 2011 | 1994 Buick Park Avenue

2 Answers

I need to change oil and filter can you tell me oil capacity and drain plug torque? Also what oil filter is best. ken


i like to use mobil 1 oil and oil filters. drain plug torque is wrench tight done overkill it. If it's a 4 cylinder it holds 4 quarts ( with new filter). If it's a v-6 it holds 6 quarts (with new filter).

Jun 22, 2010 | 2003 Toyota Avalon

1 Answer

Steps for an oil change on this bike 1986 yamaha maxim 700


Put your bike on the center stand. Inbetween your exhaust there is a bolt on the underside. Use a 14mm with an extender piece. Put a pan underneath, and unscrew the bolt all the way.Oil will drain. Above that there is a "shell" Its got fins on it. Thats your Oil filter. Unscrew that bolt, 12mm and remove Oil filter and spring and rod. Replace o ring with one that came with new filter. make sure its seated correctly. Install new filter, putting the rod and that spring in the correct place. Once she's finished draining, refill youtr crankcase with oil. Oil capacity is around 2.7 quarts. The place to fill is directly above your footpog on the brake side.

Most of XJ bikes uses 15w40, not bad if you use valvoline 20w50 4 stroke motorcycle oil.

May 14, 2010 | 1986 Yamaha XJ 700 X Maxim

1 Answer

How much engine Oil?


The engine oil capacity of a Daihatsu Sirion, 1000 cc Auto, 1999 is roughly 2.5L assuming the sump was drained and new oil filter installed.
This amount will bring the oil level on the dipstick to the upper line.
As a caution, put in 2L initially, then run the engine for a few moments then switch off. After a few minutes recheck cleaned dipstick level and top up as necessary.

Mar 16, 2010 | Daihatsu Charade Cars & Trucks

2 Answers

Fluid capacities engine oil capacity rear wheel oil capacity & recommended types


Just a bit over 3 quarts(w/filter change) 20/40w oil,200cc of 80/90gear oil for the rear(i prefer the Yamaha brand) also recomment new drain washers 214-1198-01-00

Mar 14, 2010 | 2001 Yamaha V Star 1100 Classic

1 Answer

Where is the oil filter?


on most vehicles the oil filter is can shaped and mounted on the engine block, and will be found from under neath of the vehicle to change the oil 1 jack the front of the vehicle and secure it on stands 2 place a collection pan under the vehicle (large enough to hold the vehicles oil capacity) 3 remove the plug on the bottom of the oil pan to allow oil to drain 4 use an oil filter wrench to loosen the oil filter (it will contain oil as well) 5 allow several minutes for oil to drain, the longer the better 6 replace the plug 7 pour some oil into the new filter, and oil the rubber gasket on the new filter 8 replace the filter by hand (do not use filter wrench to tighten) 9 tighten the new filter by hand to one full turn after the gasket touches the engine and no tighter 10 refill from the top of the engine to vehicles oil capacity with recommende weigth of oil note. the engines capacity and the engines capacity with filter differ for the filter will hold oil as well 11 lower the vehicle from jack stands change every 3000 miles when driving in town change every 5000 miles when driving on highway

Jan 09, 2010 | 2009 Toyota Camry

2 Answers

Oil change amount?with filter


Officially, the capacity with oil filter is 4.6 quarts. Hope this answers your question.

Nov 08, 2009 | 2000 Honda Odyssey

1 Answer

I have a 1993 Plymouth laser and have never changed oil before, but watched, not sure what to do.


Remove drain plug from oil pan to drain oil. Remove oil filter using filer wrench. Instatt new oil filter. Put oil drain plug back in. Check owner's manual for oil capacity, put all oil in minus one quart. Start engine let run for aproximately 10 seconds. put in rest of oil and check dip stick to ensure corret amont.

Oct 09, 2009 | 1993 Plymouth Laser

Not finding what you are looking for?
2008 kawasaki KLX 450R Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...