Question about 1994 kawasaki VN 750 Vulcan

Open Question

Shifting from 1 to2 it keeps getting stuck in nutrial

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Just stopped working completely. It has no air leaks that I can hear.

the piston is probably dry and jammed or the hammer is stuck in a position that is not allowing air into the chamber
have it inspected by a tool repair shop and make sure that there is an oiler in the air line

Dec 14, 2015 | Porter Cable-Cable FN250C 1-inch...

1 Answer

After getting gas car wants to stall

You should be getting a rich mixture code--is the engine light on? Purge valve may be stuck open. Start the car and remove the canister vacuum line from the purge valve. If it draws a vacuum, the valve is stuck open.

May 18, 2017 | 2001 Kia Sportage

1 Answer

It keeps cracking on me and its new why

You didn't say what it is? What keeps cracking?

Jan 29, 2013 | 1990 Oldsmobile Eighty Eight

1 Answer

Strike Element on nail gun does not retreat back int gun

may be gummed up try spraying with a carburetor cleaner and let it soak than spray with a penetrating oil and try a couple of nails sometimes the gun gets gummed up by the plastic or glue holding the nails together if it still is stuck possible slight burr or bend in rod

Feb 10, 2010 | Porter Cable-Cable FN250C 1-inch...

1 Answer

Would 1994 explorer automatic tramission work in a 1995

No it wo' nt, there is an electrical code difference between the two models that control shifting, u might get troubles of noisy/jerky shifting or being stuck in 1 gear

Sep 21, 2009 | 1995 Ford Explorer

1 Answer

91 trooper stuck in neutral

possible range selection detent switch not working causing to get stuck some times in one range only and wont shift to other range 4wd light in dash just keeps flashing for about 10 seconds then goes to previous state this then can jam up 2wd 4wd lever that you then cannot move.
there are 3 switches 2 on trans/transferr case, 1 on front LH diff axle tube actuator (shift on fly). can cause damge to the electric actuator then on transferr case.
suggest you get a dealer to look at or some one that knows this system. is also vaccum operated on front diff shift on fly unit and there were 2 different systems fitted to these vehicles push button 4wd on dash and lever next to gear lever which i take is yours

May 27, 2009 | 1991 Isuzu Trooper

Not finding what you are looking for?
1994 kawasaki VN 750 Vulcan Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75051 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides