Question about Motorcycles
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: won't idle steadily
Check the rubber boot that joins the carby to the engine to often have seen the hose clamps over tightened therefore creating a split in the rubber letting to much air in giving the rough idle eventually you wont be able to start it at all (have a good thorough look inside an outside of boot doesnt take much)
Posted on May 22, 2009
Drain and replace the gas with fresh.
Remove the air cleaner and spray carb cleaner into the inlet. Work your throttle a little then put everything back together and try to start it.
Posted on Jun 02, 2009
i wonderin if u cooked a valve or not-sed u had compression-did u test it with a gauge-any engine is really sensitive to low oil n heat-physical parts can warp n electrical stuf can fry-tho it dozint appear
Posted on Aug 13, 2009
try to google for a manual for the timberwolf, with patience you'll find it. I do know that the piston must be at top dead center and both (intake and exaughst) valves must be closed.
Posted on Aug 24, 2009
Tips for a great answer:
Dec 29, 2015 | ATVs
Apr 08, 2014 | Yamaha Timberwolf 250 2wd 97 Airbox Air...
Sep 26, 2012 | Yamaha V-max 540 38mm Carburetor Set...
Jan 15, 2010 | 2003 Yamaha YZ 250
Sep 13, 2009 | 2003 Yamaha YZ 250
23 people viewed this question
Usually answered in minutes!