Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if you lower the front of the bike the same as you lower the back of the bike the only thing is dragging the pegs when you corner i have slammed one to about 2 ins off the ground
Posted on May 27, 2009
The drain plug is on the left side of the oil reservoir pointing towards the front of the bike. The motor should be warm when you dump the oil and the o-ring should be replaced as an extra precaution (don't want to waste that new oil if you have a drip). When replacing the oil filter use a piece of tin foil to divert the oil to your waste pan.
Posted on Jul 23, 2009
you may need to check the switch that the lever presses to...it has a small wiring connection to it and you cannot miss it.Now I assume that you mean you have to push the lever back then the light goes off...If this is the case then you caliper or braking needs to be looked as the spring mechanism that brings the lever back into rest position is not working..
Posted on Jan 10, 2010
i have a 2003 ultra classic my riding lights keep blowing the fuse it wont do it sitting in the garage i have gone thru the wiring harnessing looking for the short fixed many things but still have the problem the turn signals work the brake lights still work so where do i look
Posted on Jun 30, 2011
Easiest way is to either remove the seat to gain access to the battery or use the Battery Tender harness, if the bike is equipped with one. Use a multiimeter, set to DC volts. Place the positive meter electrode to the positive terminal of the battery or tender harness. Place the other electrode to negative terminal. At idle the bike should have 12.8-13.2 volts DC. Rev the bike to approx. 2000 rpm. Meter reading should be around 13.8-14.2 volts DC. If you don't get close to these readings, the charging system isn't working. Easiest way to check to see if your stator is burned-remove the clutch (derby) cover and smell the oil inside the primary housing. If it stinks, your stator is bad.
Posted on Jun 21, 2012
Tips for a great answer:
Jan 01, 2014 | 2003 Harley Davidson FLHR Road king
Jan 16, 2013 | 2003 Harley Davidson FLHRCI Road King...
May 01, 2012 | 2003 Harley Davidson FLHRCI Road King...
Aug 29, 2011 | 2003 Harley Davidson FLHRCI Road King...
May 25, 2011 | 2003 Harley Davidson FLHR Road king
Oct 06, 2010 | Harley Davidson FLHR-FLHRI Road king...
Apr 17, 2010 | 2003 Harley Davidson FLHR Road king
Nov 30, 2008 | 2003 Harley Davidson FLHRCI Road King...
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: