Question about Motorcycles

1 Answer

How to assemble the trunk? - Motorcycles

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Motorcycles Master
  • 1,554 Answers

Trunk of WHAT?

YEAR/MAKE/MODEL!!!!!!!!!!!!!!!

Is this a Harley or a Moped?

Posted on Oct 13, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the trunk lid cable


Open the trunk, unlock the cable hook, take it off its end and pull it out. At the door side of the driver's seat pull up the carpet, remove the trunk opener bolts and remove the cable. Assemble the new cable in the reverse order of dis assembly.

Nov 12, 2013 | 1997 Toyota Corolla

1 Answer

Replace license plate blub in 2002 buick lasabre


your going to remove the entire trunk lid assembly from the vehicle. If you open the trunk and look from the inside you should either see black plastic wing nuts or 10mm nuts holding the assembly to the trunk. There will be approximately 10 of them that will need to be removed. Once they are removed the lens assembly will pop away from the trunk lid. The license bulbs can then be replaced. I usually replace all six taillight/license bulbs whenever I have one of these apart. Its the same bulb for all six lights.

Oct 02, 2011 | Cars & Trucks

1 Answer

Where is the anchor hook i the trunk of a 98 caddy deville so i can bypass my automatic trunk?


Hello: The electric pull down assembly is the hook for the trunk to latch to. If the pull down assembly is not broken the a pull down switch may correct your problem, it is mounted on the side of the pull down assembly.

Nov 19, 2010 | 1995 Cadillac DeVille

1 Answer

How do you replace the brake light on a Nissan Altima 2005


Rear Turn Signal, Brake and Parking Lights Removal and Installation To Remove:
  1. Remove or disconnect the following:
    • Trunk trim as needed
    • Nuts securing rear combination lamp assembly, from inside the trunk
    • Connectors
    • Combination lamp assembly
To Install:
  1. Install or connect the following:
    • Combination lamp assembly and connectors
    • Nuts securing combination lamp assembly
      1. Torque to: 22-33 in. lbs. (2.5-3.7 Nm)
  2. Replace trunk trim.

Nov 12, 2010 | 2005 Nissan Altima

1 Answer

Remove & replace right turn signal bulb


The procedure is as follows:-- Working from the trunk:
1. locate the 2 retaining knobs (doohickeys that you fasten the trunk cargo net to) for the Hard plastic trunk liner near to and inside of the rear light assembly. Unscrew the knobs.
2. Pulling back the plastic liner, locate the 4 studs (threaded posts). 3 will be located vertically in a line, the fourth, outboard and lower. Using a 10mm wrench(small), remove 3 of the 4 nuts fastening the light assembly to the body. DO NOT remove the lowest nut of the 3 in a vertical line, as this does not fasten the light assembly. DON'T LOSE THE NUTS OR WASHERS.

Working from the rear of the car:
1. Hand pull the light assembly from the car body.
2. Remove bad lamp. Twist lamp socket and pull out of assembly. Pull lamp and replace with #3057.
Reassemble:
1. Test light prior to reassembly.
2. Ensure Gasket material for assembly and studs is intact, this keeps water/dust out and dampens movement (prevents rattling and increases the life of lamp).
3. Use Reverse instruction for reassembly.
-------------- The taillight/backup light/license plate light assembly is separate from the brake light/turn signal light assembly on the Buick LeSabre. No matter what rear bulb you have to replace, you must access the trunk area to do so. Open the trunk of the Buick LeSabre.Locate 7 nuts underneath the trunk lid (3 on each end of the trunk lid and 1 in the middle). Remove each one using a nut driver.Manipulate the trunk lid at chest level and gently pull the rear taillight assembly slightly away from the trunk lid.Locate the burned out bulb sockets and then remove the bulbs. Insert the new bulbs into the socket and test by turning on the lights before reassembling.Replace the tail light assembly by aligning the studs inside the predrilled holes in the trunk lid. Refasten the 7 nuts.Remove the cargo net if applicable to replace the brake and/or turn signal light.Unscrew the plastic wingnut that the cargo net is attached to. Pull back the trunk liner.Remove the 2 plastic wingnuts under the trunk liner.Pull the brake light assembly outward from the back of the LeSabre.Locate the socket of the burned out bulb and then turn counter clockwise 1/4-inch to release it from the assembly.Remove the old bulb from the socket and replace with a new one. Test the light before reassembling. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Aug 07, 2010 | Buick LeSabre Cars & Trucks

1 Answer

Chang brakelights on a sebrig


Hello!

  1. Open the trunk by using the driver's side trunk release latch or by manually unlocking it.
  2. Peel back the trunk liner to expose the wiring connector and taillight housing plastic retainers.
  3. Disconnect the wiring connector, loosen the plastic retainers and remove the taillight assembly from the car.
  4. Twist the turn signal bulb socket counterclockwise to remove it from the taillight assembly. Then, pull the malfunctioning bulb straight out of the socket.
  5. Insert the replacement bulb directly into the empty socket and then twist the socket back into the taillight assembly.
  6. Reinstall the tail light assembly.
  7. Activate the turn signal to make sure it's working. If it lights up, fasten the trunk lining back into place and close the trunk

Sep 18, 2009 | 2005 Chrysler Sebring Conv

1 Answer

FORCE TRUNK TO CLOSE NOW TRUNK WON'T DO ANYTHING


if it has auto lock you may have damaged lock assembly , it will need to be replace as an assembly.

Aug 03, 2009 | 2007 Lexus LS 430

1 Answer

Diagram for volvo trunk lock


My son was missing with the valet parking key while I was driving. When we got home and tried to open the trunk it wouldn't. It also made this buzzing sound when I push on the trunk latch.

Mar 05, 2009 | 2001 Volvo S40

3 Answers

Trunk Latch Problem


You need to replace the Latch assembly part thats located inside the trunk

Thanks

Nov 01, 2008 | 2003 Honda Civic

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...