Question about 1997 Honda CBR 600 F(3)V

1 Answer

No spark not getting any spark on a 97 cbr 600

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Check the fuses. Next, check for spark but with a new spark plug. How good is the battery? Try a jump start from your car battery. Is the kill switch on? Does the side stand have a kill switch? Is it working properly? Check the operation of the ignition switch and all kill switches with a volt ohmmeter. You should be getting power into and out of the ignition switch.

Check the wiring harness. Did a wire come unplugged? Are all wires clean and with solid connections? Any abraded or pinched wires? Is the bike in neutral and the neutral light is lit up? If no neutral light, check the neutral switch and neutral switch wire on center casing. If still no spark, get CDI system and coils checked at the dealers shop.

Please rate this as a top answer. Thanks

Posted on Apr 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Honda CBR 929 RR Fireblade will not start when engine is warm


Hi, Adrain and the usual suspects are:
1. Faulty ignition coil.
2. Faulty spark plug cables.
3. Faulty temperature sensor.
4. Faulty starter motor.
5. Valves adjusted too tight.
6. Spark plug gap too wide.
7. Fuel has vapor lock.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/honda-cbr-600/49891-problems-starting-only-when-hot.html
Wont start when hot slow crank like battery dead but not dead CBR Forum...
http://www.cyclechaos.com/images/9/97/Honda_CBR929RR_Service_Manual.pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

May 11, 2014 | 2001 Honda CBR 929 RR Fireblade

1 Answer

1989 Honda CBR 600 F(1)K spark plug gap


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Spark Plug Gap CBR Forum Enthusiast forums for Honda CBR Owners
How to Change Spark Plugs On Motorcycle
http://www.home-business-host.com/images/cbr/CBR1000F%20SC21%20(1987-1996).pdf
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

May 26, 2012 | 1989 Honda CBR 600 F(1)K

1 Answer

How do you adjust rear shock up on a 1989 honda cbr 600


Standard settings are...Rear Preload: Position 3
Rear Compression: 1 turn out from maximum (punch aligned)
Rear Rebound: 1 turn out from maximum (punch aligned)
This is for the 97 & 98 year models.

Jul 26, 2011 | 1989 Honda CBR 600 F Hurricane

1 Answer

1987 Honda CBR 600 F Hurricane no spark


Hi, Racer221 and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1990 CBR 600 No Spark CBR Forum Enthusiast forums for Honda CBR Owners
http://www.fireblades.org/forums/honda-cbr-600/101244-no-start-no-spark-please-help.html
http://www.home-business-host.com/images/cbr/CBR1000F%20SC21%20(1987-1996).pdf https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

May 31, 2011 | 1987 Honda CBR 600 F Hurricane

1 Answer

Any good tips how change spark plugs on 00 cbr 600,have tank and air box off,But its hard to get in at them. cheers


get some good flex adapters and u can pretty much get any bikes spark plugs and modify a 1/4 in socket wrench to a 3/4in

Feb 15, 2011 | Honda CBR 600 900 929 954 1000 RR KEYCHAIN...

1 Answer

How to change spark plugs on a 1998 Honda CBR 600


Remove spark plug cable from top of spark plug and use a socket set to remove spark plug and then place new spark plug and tighten it to required Torque which is specified in Repair manual for your bike

Jun 23, 2010 | 1998 Honda CBR 600 F(3)W

1 Answer

1998 Honda CBR 600 F(3)W fuel pressure


Hi, Apryl2323 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Stock Fuel Pressure for cbr f3 Anyone Stunt Bike Forum
97 F3 factory fuel pump pressure CBR Forum Enthusiast forums for Honda CBR...
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
http://www.hondampe.com.au/docs/owning_a_honda/owners_manuals/motorcycles/CBR600F-1998.pdf

Feb 15, 2010 | 1998 Honda CBR 600 F(3)W

1 Answer

Whats the newest gauge you can hook to a 97


Brother with a bike you can do anything. I'm running a digital 08 cbr f4i guage cluster on my 97 cbr 600 F3 stunt bike. Just takes skill and know how. Hit me up if you would like an explanation. If I don't answer. Leave a message. I do not get texts. 702-572-4754 Mo

Jul 07, 2009 | 1997 Suzuki GSX-R 600

1 Answer

97' cbr 600 rr f3 doesn't start


check to see if fuel switch is on...when was the last time carbs were checked?

Dec 24, 2008 | 1997 Honda CBR 600 F(3)V

Not finding what you are looking for?
1997 Honda CBR 600 F(3)V Logo

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4888 Answers

yadayada
yadayada

Level 3 Expert

79847 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...