Question about Motorcycles

Open Question

Howto derestrict a CBF 600 HONDA - Motorcycles

Posted by on

4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: spark plugs

You need to remove the cowling (Remove all allen keys 2 x 8mm bolds under light, 2x push type secures)

Then remove the bolt at the rear of the tanks slide the tank back and rest carefully. (I managed this with out disconnecting it)

One at a time remove HT lead, using 16mm spark plug socket with about 50mm long extention and ratchet remove and replace the spark plug. (When tightning remember with new spark plugs there is a crush washer so do it up as you can comfortably then a 1/4 turn more.also the spark plug removing tool is to long so don't bother with this) Then move to the next plug

Then replace tank and cowling all done. (This is a good opertunity to wash the screen cowling and frame which it is all in pieces)

This is approx a 2 hour job.

Posted on Feb 12, 2009

  • 921 Answers

SOURCE: HONDA CBF 600 cant start

well first off i never wash my bike....i hand towel everything and for the tough greasy spots i use Chemtool b-12 basically MEK, please wear gloves and mask when using this, it has highly toxic fumes!! Second when you wash a battery with water and dont wipe it dry it'll cause a drain across the top because there is now a water conection between the two...always keep the battery top clean. thats what probably happen to you the first time. first off let me know ..does it bump start o.k. everytime? and there is the possiblity that since you've be washing your bike that the kill switch is not functioning properly you might have got moisture in there.
by a cheap trickle charger let it charge for about four hours leave the seat off and take a meter to it to see what the voltage should be about minmum 12.6v that sufficient. 13 would be excellent. 12.2 means it dying. Crank it up to 4000 prm and watch the votage go to 15v and then regulate down to about 13v...if this checks out your battery system is in good shape. also make sure that all your spark plug wires are securely"ll only take one to mess it up. Yours is probably fuel injected and im not to much up on that so thats about all i can suggest or you can do something that i swear by that i used when i had bad hesitation and just a crappy ride and wont hurt your some Seafoam for an automotive store and pour about a tird of it in about two gallons of gas and ride a minimum of fifteen miles getting up to speed once in awhile to work this stuff through after ten miles it just kicked in and back to normal ever now i use a tad everyweek to keep it that way. i now have only a 1% starting problem as opposed to at 10% non-starting problem....must still be a little dirt or gunk still in there.Just remember bump start it add some sea might ride rough for the first five miles but keep at it dont let it stall. later.

Posted on Sep 13, 2009

  • 361 Answers

SOURCE: Noise clutch area honda cbf 600 04 plate

This is normal, it is the clutch plates rattling, when u apply pressure it holds the plates tight.

Posted on Jul 06, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2008 Honda CBF 600 starter removal

Hi, Matt for this situation I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
97 Honda CBR 600 F3 starter removal and replacemen
How to Repair motorcycle starter the cheap way
Honda CBF600SA Service Manual

Apr 16, 2017 | 2008 Honda CBF 600

1 Answer

Hi. just purchased 2008 honda cbf 600n reg aug>but

Enter th VIN ( frame number ) at the website shown and the decoder will tell you exactly what bike you have.

May 15, 2011 | 2008 Honda CBF 600

1 Answer

Honda CBF headlight problem. Pass light ok, dipped beam vry dim ,no main beam.Any suggestions?

I found the problem was with the starter solenoid, it need WD40 sprayed on it, as it cuts out the headlamp supply as the starter motor operates.

Jan 12, 2011 | 2005 Honda CBF 600

1 Answer

My 600 cbf fell three days ago, it was on its side for about 7 hrs, i havent been able to get it started since, what should i do??

pull the spark plug, crank it to get all the fuel out of the piston chamber, dry off the spark plug or get a new one being as it may be junk now.

Jan 11, 2011 | 2005 Honda CBF 600

1 Answer

Noise clutch area honda cbf 600 04 plate

This is normal, it is the clutch plates rattling, when u apply pressure it holds the plates tight.

Jul 06, 2010 | 2005 Honda CBF 600

2 Answers

Hi just borrowed a Honda cbf 600 abs, but can t locate the choke, any help??

the choke is on the left hand side! above the crank casse, below the carbs! just pull

Jan 12, 2010 | 2004 Honda CBF 600 S ABS

2 Answers

Can you lower a cbf 600 without a kit

you can lower the seat check your owners manual

Nov 04, 2009 | 2005 Honda CBF 600

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75005 Answers


Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides