Question about Honda VT 750 DC Shadow Spirit Motorcycles
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1992 Honda Nighthawk 750 Parts
Motorcycle Electrical Ignition for Honda Nighthawk 750 eBay
Honda 1998 VT750C Service Manual
Honda VT750C Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Sep 27, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
follow your accel cable to the carb. move the throttle till you see where the linkage moves. look around the linkage to see what it hits on at no throttle. that will be your idle screw
Posted on Aug 04, 2009
SOURCE: 82 honda nighthawk 750
Posted on Aug 18, 2009
Hi and welcome to FixYa,
Your decribed problem could either be a neutral switch about to fail (least likely) or a loose grounding issue (most likely). This switch must read 0 ohms to ground when in neutral and infinity (no reading) when in any gear.
Good luck and thank you for asking FixYa.
Posted on Aug 22, 2009
SOURCE: What is the oil capacity
To check your oil level , locate the large round clutch cover on the right side of the engine. With the motorcycle on the center stand unscrew the dipstick and wipe it off. Put the dipstick back in the fill hole till it stops but do not screw it in. Look at the level of the oil between the two marks. To change your oil you will need 4 quarts of oil, a filter, and a new aluminum drain plug washer. You can reuse the old one if it has not been squished out of shape. Your motorcycle comes from Honda usually with 10w-40 mineral base motorcycle oil. You can use any oil that is JASO MA certified motorcycle oil. 10w-40 for cold climate. 20w-50 for warm climate/touring. Car oils use different additives and may cause scoring in certain types of cam bearings. Do not use any oil that says " Energy Conserving " on the label . It will shorten the life of your wet clutch and transmission gears. If you choose Synthetic oils, they will help your bike run cooler and shift easier. Pour in three quarts of oil and add enough from the fourth quart to reach the high mark on the dip stick. You will probably need either 3.2 or 3.4 quarts to hit the high mark. Run the motor for a minute or two to fill the oil filter compartment with oil. Now recheck the oil level and top up as needed.
Posted on Jan 16, 2011
Tips for a great answer:
May 05, 2018 | 1995 Honda CB 750 Nighthawk
Jul 01, 2013 | 1992 Honda CB 750 Nighthawk
Jul 27, 2012 | 1992 Honda CB 750 Nighthawk
May 25, 2012 | 1992 Honda CB 750 Nighthawk
Apr 25, 2012 | 1992 Honda CB 750 Nighthawk
Sep 05, 2011 | 1992 Honda CB 750 Nighthawk
May 15, 2011 | 1992 Honda CB 750 Nighthawk
Apr 20, 2011 | 1992 Honda CB 750 Nighthawk
May 09, 2010 | 1992 Honda CB 750 Nighthawk
Feb 09, 2010 | 1992 Honda CB 750 Nighthawk
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: